1994 JEEP CHEROKEE service schedule

energized). This is done to compensate for the re-
duced flow through injector caused by the lowered
voltage.
BRAKE SWITCHÐPCM INPUT
When the brake light switch is activated, the pow-
ertrain control module (PCM) receives an input indi-
cating that the brakes are being applied. After
receiving this input, the PCM maintains idle speed
to a scheduled rpm through control of the idle air
control (IAC) motor. The brake switch input is also
used to operate the speed control system.
CAMSHAFT POSITION SENSORÐPCM INPUT
A sync signal is provided by the camshaft position
sensor located in the ignition distributor (Fig. 5). The
sync signal from this sensor works in conjunction
with the crankshaft position sensor to provide the
powertrain control module (PCM) with inputs. This
is done to establish and maintain correct injector fir-
ing order.
Refer to Camshaft Position Sensor in Group 8D, Ig-
nition System for more information.
DATA LINK CONNECTORÐPCM INPUT
The data link connector (diagnostic scan tool con-
nector) links the DRB scan tool with the powertrain
control module (PCM). The data link connector is lo-
cated in the engine compartment (Figs. 6 or 7). For
operation of the DRB scan tool, refer to the appropri-
ate Powertrain Diagnostic Procedures service man-
ual.
The data link connector uses two different pins on
the PCM. One is for Data Link Transmit and the
other is for Data Link Receive.
INTAKE AIR TEMPERATURE SENSORÐPCM INPUT
The intake manifold air temperature sensor is in-
stalled in the intake manifold with the sensor ele-
ment extending into the air stream (Figs. 8 or 9).
The sensor provides an input voltage to the power-
train control module (PCM) indicating intake mani-
fold air temperature. The input is used along with
inputs from other sensors to determine injector pulse
width. As the temperature of the air-fuel stream in
the manifold varies, the sensor resistance changes.
This results in a different input voltage to the PCM.
CRANKSHAFT POSITION SENSORÐPCM INPUT
This sensor is a Hall Effect device that detects
notches in the flywheel (manual transmission), or
flexplate (automatic transmission).
This sensor is used to indicate to the powertrain
control module (PCM) that a spark and or fuel injec-
tion event is to be required. The output from this
sensor, in conjunction with the camshaft position
sensor signal, is used to differentiate between fuel in-
jection and spark events. It is also used to synchro-
nize the fuel injectors with their respective cylinders.
Fig. 5 Camshaft Position Sensor
Fig. 6 Data Link ConnectorÐYJ ModelsÐTypical
Fig. 7 Data Link ConnectorÐXJ ModelsÐTypical
14 - 20 FUEL SYSTEMJ

LIFTGATE LOCK CYLINDER
REPLACEMENT.......................8P-7
LIFTGATE OPENING WEATHERSTRIP SEAL . . . 23-70
LIFTGATE PILLAR TRIM COVERSÐXJ
VEHICLES.........................23-116
LIFTGATE REMOVAL/INSTALLATION........23-65
LIFTGATE SERVICE INFORMATIONÐXJ
VEHICLES..........................23-65
LIFTGATE SUPPORT ROD BALL
STUD REPLACEMENT.................23-70
LIFTGATE SUPPORT ROD CYLINDER.......23-69
LIFTGATE SUPPORT ROD CYLINDER
DISPOSAL..........................23-70
LIFTGATE TRIM PANEL.................23-66
LIFTGATE WINDOW GLASSÐXJ
VEHICLES..........................23-81
LIFTGATE WIPER.......................8K-5
LIFTGATE WIPER SWITCH REPLACEMENT....8K-6
LIGHT DISPLAY, ABS WARNING............5-3
LIGHT DISPLAY, BRAKE WARNING..........5-4
LIGHTED VANITY MIRROR...............8L-19
LIGHTED VANITY MIRROR TROUBLE
DIAGNOSIS.........................8L-19
LIGHTS, BRAKE WARNING.................5-1
LIGHTS (CANADA ONLY), DAYTIME
RUNNING...........................8L-16
LIGHTS, SYSTEM WARNING..............5-42
LIMITED SLIP DIFFERENTIAL...............3-8
LIMITS, AW-4 OIL PUMP WEAR.........21-325
LINE CLUSTER, HIGH...................8E-12
LINE CLUSTER, LOW...................8E-11
LINE FITTINGS, TRANSMISSION COOLER . . 21-187
LINERS, REAR WHEELHOUSE FLARES.....23-18
LINERS, WHEELHOUSE SPLASH.........23-146
LINES AND FITTINGS, SERVICING
TRANSMISSION COOLER.............21-106
LINK CONNECTORÐPCM INPUT, DATA.....14-20
LINK CONNECTORÐPCM OUTPUT, DATA . . . 14-24
LINK, DRAG.....................19-14,19-17
LINK REPLACEMENT, FUSIBLE............8W-4
LINKAGE ADJUSTMENT, SHIFT....21-275,21-296
LINKAGE ADJUSTMENT (YJ), GEARSHIFT . . . 21-96
LINKAGE AND BALL STUDS, STEERING.....0-30
LINKAGE FLUID, CLUTCH..................6-1
LINKAGE, GEARSHIFT..................21-70
LINKAGE INSTALLATION, CLUTCH
HYDRAULIC..........................6-12
LINKAGE REMOVAL, CLUTCH HYDRAULIC....6-11
LINKAGEÐXJ, STEERING..........19-14,19-73
LINKAGEÐYJ, STEERING..........19-17,19-73
LINKS, FUSIBLE.......................8W-3
LOAD DATA, VEHICLE................INTRO.-3
LOAD DATA, XJ VEHICLE.............INTRO.-5
LOAD DATA, YJ-VEHICLE.............INTRO.-6
LOAD TEST, BATTERY...................8A-4
LOCATING A SYSTEM...................8W-2
LOCATIONS, SPLICE..............8W-2,8W-53
LOCATIONS, TRANSMISSION SWITCH
AND PLUG..........................21-33
LOCATIONS, XJ RHD SPLICE............8W-67
LOCATIONS, XJ SPLICE................8W-59
LOCATIONS, YJ SPLICE................8W-53
LOCK COMPONENT OVERHAUL,
ADAPTER HOUSING AND PARK........21-120
LOCK COMPONENT REPLACEMENT,
PARK .............................21-102
LOCK CYLINDER, DOOR KEY.............23-54
LOCK CYLINDER, FULL-METAL DOOR
KEY ..............................23-178
LOCK CYLINDER REPLACEMENT,
LIFTGATE............................8P-7
LOCK CYLINDER, TAILGATE.............23-160
LOCK CYLINDER/STRIKER, LIFTGATE
LATCH/KEY.........................23-68
LOCK CYLINDERS, KEY............23-2,23-132
LOCK HANDLE, FULL-METAL DOOR.......23-175
LOCK, HYDROSTATIC.....................9-4
LOCK RODS, DOOR INSIDE LATCH
RELEASE...........................23-57
LOCK SWITCH, PASSENGER DOOR
.........8P-5
LOCK SWITCHÐ2-DOOR LEFT HAND
DRIVE, DRIVERS DOOR POWER
..........8P-2
LOCK SWITCHÐ2-DOOR RIGHT HAND
DRIVE,DRIVERS DOOR POWER
..........8P-3
LOCK SWITCHÐ4-DOOR, DRIVERS
DOOR POWER
........................8P-4LOCKS, DIAGNOSING POWER DOOR . . . 8P-1,8P-9
LOCKS, POWER; ELECTRICAL.............8A-1
LOCKS, POWER; POWER DOOR LOCKS.....8P-1
LOCKS, POWER DOOR..................8P-10
LOCK/UNLOCK RELAY REPLACEMENT,
DOOR.............................8P-12
LOOP MODES OF OPERATION, OPEN
LOOP/CLOSED.......................14-27
LOOP/CLOSED LOOP MODES OF
OPERATION, OPEN...................14-27
LOSS OF SENSOR INPUT..................5-3
LOW FUEL WARNING INOPERATIVE........8E-4
LOW FUEL WARNING LAMP..............8E-2
LOW LINE CLUSTER...................8E-11
LOW SPEED KNOCK; FRONT SUSPENSION
AND AXLE...........................2-17
LOW SPEED KNOCK; REAR SUSPENSION
AND AXLES...........................3-8
LOW WASHER INDICATOR INOPERATIVE....8E-4
LOWER SUSPENSION ARM...............2-11
LUBRICANT AND REPLACEMENT PARTS,
RECOMMENDED.......................0-3
LUBRICANT CHANGE; FRONT
SUSPENSION AND AXLE................2-22
LUBRICANT CHANGE; REAR SUSPENSION
AND AXLES......................3-13,3-30
LUBRICANT, RECOMMENDED.............21-2
LUBRICANT SPECIFICATIONS, BODY........0-35
LUBRICANT SPECIFICATIONS; FRONT
SUSPENSION AND AXLE................2-20
LUBRICANT SPECIFICATIONS; REAR
SUSPENSION AND AXLES...........3-11,3-30
LUBRICANT, TRANSFER CASE.....21-273,21-294
LUBRICANT, TRANSMISSION.............21-33
LUBRICANTS, CHASSIS COMPONENT
AND WHEEL BEARING.................0-30
LUBRICANTS, CLASSIFICATION OF..........0-2
LUBRICATION, CLUTCH COMPONENT........6-1
LUBRICATION, COMPONENTS
REQUIRING NO........................0-3
LUG NUT, WHEEL......................22-11
LUGGAGE RACKÐXJ VEHICLES..........23-32
MAGNETIC CLUTCH....................24-18
MAIN BEARING FITTING CHART.......9-43,9-83
MAIN BEARINGS, CRANKSHAFT.......9-40,9-80
MAIN OIL SEALS, REAR..............9-44,9-84
MAINTENANCE, BATTERY................8B-1
MAINTENANCE, ENGINE..................0-13
MAINTENANCE SCHEDULES...............0-5
MAINTENANCE, SEVERE SERVICE...........0-5
MAJOR COMPONENT IDENTIFICATION . . . INTRO.-3
MALFUNCTION INDICATOR LAMP
(CHECK ENGINE); INSTRUMENT PANEL
AND GAUGESÐXJ................8E-2,8E-4
MALFUNCTION INDICATOR LAMP
(CHECK ENGINE); INSTRUMENT PANEL
AND GAUGESÐYJ...................8E-16
MALFUNCTION INDICATOR LAMPÐPCM
OUTPUT............................14-26
MANIFOLDÐ2.5L ENGINE, ENGINE
EXHAUST............................11-7
MANIFOLDÐ2.5L ENGINE, INTAKE.........11-8
MANIFOLDÐ4.0L ENGINE, ENGINE
EXHAUST............................11-7
MANIFOLDÐ4.0L ENGINE, INTAKE
.........11-9
MANIFOLD ABSOLUTE PRESSURE (MAP)
SENSOR; FUEL SYSTEM
...............14-57
MANIFOLD ABSOLUTE PRESSURE (MAP)
SENSOR; IGNITION SYSTEMS
......8D-5,8D-27
MANIFOLD ABSOLUTE PRESSURE (MAP)
SENSORÐPCM INPUT
................14-21
MANIFOLD ABSOLUTE PRESSURE (MAP)
SENSOR TEST; FUEL SYSTEM
..........14-44
MANIFOLD ABSOLUTE PRESSURE (MAP)
SENSOR TEST; IGNITION SYSTEMS
......8D-14
MANIFOLD AIR TEMPERATURE SENSOR,
INTAKE
........................8D-5,8D-27
MANIFOLD AIR TEMPERATURE
SENSOR TEST, INTAKE
................8D-14
MANIFOLD ASSEMBLY, PRESSURE
GAUGE
..............................24-2
MANIFOLD, INTAKE
....................14-57
MANIFOLD LEAKAGE DIAGNOSIS, INTAKE
.....9-5
MANUAL FIRST GEAR (1) POSITION,
HYDRAULIC FLOW IN
.................21-94MANUAL SECOND (2) RANGE,
HYDRAULIC FLOW IN.................21-93
MANUAL SHIFTING TEST...............21-168
MANUAL STEERING GEAR..........19-35,19-73
MANUAL STEERING GEAR
SPECIFICATIONS.....................19-44
MANUAL STEERING GEARÐYJ VEHICLES....0-32
MANUAL STEERING SYSTEM DIAGNOSIS . . . 19-36
MANUAL TRANSMISSION................0-22
MANUAL TRANSMISSION, AX 15.........21-32
MANUAL TRANSMISSION, AX 4/5..........21-1
MANUAL TRANSMISSION, SELECTIVE
SNAP RING CHARTÐAX 15...........21-321
MANUAL TRANSMISSION, TORQUE
SPECIFICATIONSÐ AX 15.............21-320
MANUAL VALVE SHAFT OVERHAUL.......21-205
MANUAL VALVE SHAFT SEAL
REPLACEMENT.....................21-178
MARKER LAMP BULB REPLACEMENT,
SIDE...............................8L-7
MASTER CYLINDER.....................5-40
MASTER CYLINDER INSTALLATION.....5-20,5-50
MASTER CYLINDER OVERHAUL...........5-20
MASTER CYLINDER REMOVAL........5-20,5-50
MASTER CYLINDER, STANDARD...........5-20
MASTER CYLINDER/POWER BOOSTER
TEST...............................5-11
MATCH MOUNTING TIRES................22-7
MATERIAL, BRAKELINING.................5-1
MATS, CARPET/FLOOR.................23-198
MATS, CARPETS AND FLOOR...........23-129
MEASUREMENT AND ADJUSTMENT,
DIFFERENTIAL SHIM PACK..............2-42
MEASUREMENT, DIFFERENTIAL AND
PINION; FRONT SUSPENSION AND AXLE....2-38
MEASUREMENT, DIFFERENTIAL AND
PINION; REAR SUSPENSION AND AXLES....3-20
MEASUREMENT, UNIVERSAL JOINT
ANGLE..............................16-4
MEASUREMENTS AND ADJUSTMENTS,
ALIGNMENT...........................2-6
MEASURING WITH PLASTIGAGE............9-3
METALS, PAINT REPAIR ON GALVANIZED . . 23-202
METRIC SYSTEM NOTATION...........INTRO.-8
METRIC, THREAD NOTATIONÐSAE.....INTRO.-9
(MFI)ÐCOMPONENT DESCRIPTION/
SYSTEM OPERATION, MULTI-
PORT FUEL INJECTION................14-17
(MFI)ÐCOMPONENT REMOVAL/
INSTALLATION, MULTI-PORT FUEL
INJECTION..........................14-54
(MFI)ÐGENERAL DIAGNOSIS,
MULTI-PORT FUEL INJECTION..........14-32
MINI-FLOOR CONSOLEÐXJ VEHICLES....23-124
MIRROR (EXTERNAL), HALF METAL
DOOR
............................23-158
MIRROR, INTERIOR REARVIEW
...........23-74
MIRROR, LIGHTED VANITY
..............8L-19
MIRROR, REARVIEW
..................23-183
MIRROR REPLACEMENT, POWER
..........8T-4
MIRROR RETAINING BRACKET,
REARVIEW
.........................23-183
MIRROR SUPPORT BRACKET
REPLACEMENT, INTERIOR REARVIEW
....23-75
MIRROR SWITCH, POWER
................8T-2
MIRROR SWITCH REPLACEMENT,
POWER
.............................8T-4
MIRROR SWITCH TESTING, POWER
........8T-2
MIRROR TROUBLE DIAGNOSIS, LIGHTED
VANITY
............................8L-19
MIRRORS, EXTERNAL
..................23-31
MIRRORS, POWER
.....................8A-1
MISS, INJECTOR DIAGNOSISÐVEHICLE
RUNS ROUGH AND/OR HAS A
..........14-49
MODE, ABS OPERATION IN ANTILOCK
BRAKING
............................5-43
MODE, ABS OPERATION IN NORMAL
BRAKING
............................5-43
MODE, VEHICLE RESPONSE IN
ANTILOCK
............................5-3
MODEL 30 AXLE AND TUBE AXLE
(2WD)
..............................2-20
MODEL 30 FRONT AXLE
.............2-46,2-47
MODEL 35, REAR AXLE
..........3-11,3-28,3-50
14 INDEXJ
Description Group-Page Description Group-Page Description Group-Page

REMOVAL (XJ WITH MINI CONSOLE),
PARKING BRAKE LEVER................5-58
REMOVAL (XJ WITHOUT CONSOLE),
PARKING BRAKE LEVER................5-60
REMOVALÐYJ, HCU....................5-54
REMOVAL (YJ), PARKING BRAKE PEDAL....5-61
REMOVAL/DISASSEMBLY, PINION;
FRONT SUSPENSION AND AXLE..........2-34
REMOVAL/DISASSEMBLY, PINION; REAR
SUSPENSION AND AXLES...............3-17
REMOVAL/INSTALLATION, 2.5L STARTER
MOTOR.............................8B-5
REMOVAL/INSTALLATION, 4.0L
STARTER MOTOR.....................8B-6
REMOVAL/INSTALLATION, COMPONENT;
EMISSION CONTROL SYSTEMS..........25-8
REMOVAL/INSTALLATION, COMPONENT;
IGNITION SYSTEMS..................8D-20
REMOVAL/INSTALLATION, DOOR..........23-40
REMOVAL/INSTALLATION, LIFTGATE.......23-65
REMOVAL/INSTALLATION, MULTI-PORT
FUEL INJECTION (MFI)ÐCOMPONENT....14-54
RENEGADE VEHICLES, BODY EXTENSION
PANELS AND FASCIASÐYJ............23-147
RENEGADE VEHICLES, FOG LAMPÐYJ....23-150
RENEGADE VEHICLES, FRONT FASCIA
AND SKID PLATEÐYJ................23-148
RENEGADE VEHICLES, FRONT FENDER
EXTENSION PANELÐYJ..............23-149
RENEGADE VEHICLES, REAR FASCIA
AND SKID PLATEÐYJ................23-152
RENEGADE VEHICLES, REAR QUARTER
EXTENSION PANELÐYJ..............23-151
RENEGADE VEHICLES, ROCKER
EXTENSION PANELÐYJ..............23-150
REPAIR DAMAGED OR WORN THREADS......9-4
REPAIR, FIXED GLASS WATER LEAK
DETECTION...................23-83,23-189
REPAIR, HARD TOP...................23-165
REPAIR ON GALVANIZED METALS, PAINT . . 23-202
REPAIR PROCEDURES, COMPASS..........8C-4
REPAIR PROCEDURES, CONSOLE..........8C-6
REPAIR PROCEDURES, THERMOMETER
AND SENSOR SYSTEM.................8C-6
REPAIR, REAR WINDOW DEFOGGER GRID . . . 8N-2
REPAIR SERVICE, FRAME...............13-13
REPAIR, WIRING.......................8W-4
REPAIRING LEAKS......................22-3
REQUIREMENTS, AW-4 CLUTCH AND
BRAKE PACK.......................21-328
REQUIREMENTS, FUEL....................0-2
RESERVE/OVERFLOW SYSTEM, COOLANT . . . 7-19
RESERVOIR REPLACEMENT..............19-12
RESISTANCE, IGNITION COIL............8D-11
RESISTANCE (OHMS), SENSOR.....8D-12,8D-14
RESISTANCE (OHMS)ÐCOOLANT
TEMPERATURE SENSOR/MANIFOLD AIR
TEMPERATURE, SENSOR..............14-43
RESISTANCE, SPARK PLUG CABLE........8D-18
RESISTORS REPLACEMENT, BLOWER
MOTOR............................24-35
RESPONSE IN ANTILOCK MODE, VEHICLE....5-3
RESPONSE, STEERING....................5-3
RESTRAINT REPLACEMENT, DOOR........23-47
RETAINER AND PISTON SPECIFICATIONS,
AW-4 .............................21-327
RETAINER CLIP, FUEL AND BRAKE FLUID
TUBE; BODY COMPONENTSÐXJ
VEHICLES..........................23-86
RETAINER CLIP, FUEL AND BRAKE
FLUID TUBE; FRAME AND BUMPERS.....13-16
RETAINING BRACKET, REARVIEW
MIRROR..........................23-183
RETURN HOSE REPLACEMENT,
PRESSURE..........................19-9
RETURNÐPCM INPUT, SENSOR..........14-23
REVEAL MOULDING, WINDSHIELD . . 23-73,23-183
REVERSE FLUSHING, TRANSMISSION
COOLER...........................21-105
REVERSE, HYDRAULIC FLOW IN..........21-95
RHD MODELS, BELT TENSIONÐEXCEPT.....7-38
RHD SPLICE LOCATIONS, XJ
............8W-67
RHD, STEERING
.......................19-69
RHD, XJ WIRING
......................8W-43
RHEOSTAT, HEADLAMP
SWITCH/ILLUMINATION
...............8E-21RIGHT HAND DRIVE, BELT SERVICEÐ
EXCEPT.............................7-34
RIGHT HAND DRIVE, BELT SERVICEÐ
WITH...............................7-35
RIGHT HAND DRIVE, DRIVERS DOOR
POWER LOCK SWITCHÐ2-DOOR.........8P-3
RIGHT HAND DRIVE, DRIVERS DOOR
POWER WINDOW SWITCHÐ2-DOOR......8S-7
RIGHT HAND DRIVE (RHD), BELT
TENSIONÐEXCEPT....................7-33
RIGHT HAND DRIVE VEHICLES............23-1
RIGHT (R) POSITION, SWITCH TEST
WITH SWITCH IN.....................8T-3
RING CHARTÐAX 15 MANUAL
TRANSMISSION, SELECTIVE SNAP......21-321
RING GEAR INSTALLATION...............3-24
RING/THRUST WASHER/THRUST PLATE
SPECIFICATIONS, 30RH/32RH SNAP.....21-322
ROAD TEST, ANALYZING THE.............21-70
ROAD TEST, OPERATIONAL CHECK.........8H-7
ROAD TEST; TRANSMISSION AND
TRANSFER CASE.....................21-70
ROAD TEST; VEHICLE SPEED CONTROL
SYSTEM............................8H-5
ROAD TESTING.........................5-7
ROCKER ARMS....................9-19,9-59
ROCKER EXTENSION PANELÐYJ
RENEGADE VEHICLES................23-150
ROD AND PAWL SERVICE, PARK.........21-181
ROD BALL STUD REPLACEMENT,
LIFTGATE SUPPORT..................23-70
ROD BEARING FITTING CHART,
CONNECTING.....................9-36,9-76
ROD CYLINDER DISPOSAL, LIFTGATE
SUPPORT..........................23-70
ROD CYLINDER, LIFTGATE SUPPORT......23-69
ROD, TIE.......................19-14,19-17
RODS, DOOR INSIDE LATCH RELEASE
AND LOCK..........................23-57
RODS, PISTONS AND CONNECTING....9-34,9-74
ROOF VENT, HARD TOP................23-165
ROTATION, TIRES.......................22-3
ROTOR, DISTRIBUTOR.................8D-10
ROTOR, IGNITION CABLES, DISTRIBUTOR
CAP ................................0-18
ROTOR INSTALLATION...................5-30
ROTOR REFINISHING, DISC BRAKE.........5-32
ROTOR REMOVAL......................5-30
ROTOR RUNOUT, DISC BRAKE............5-31
ROTORÐSPEEDOMETER DRIVE GEAR,
SPEED SENSOR.....................21-183
ROTOR THICKNESS, DISC BRAKE..........5-31
ROTOR THICKNESS VARIATION, DISC
BRAKE..............................5-31
ROUGH AND/OR HAS A MISS, INJECTOR
DIAGNOSISÐVEHICLE RUNS...........14-49
ROUTINE SERVICE.......................0-2
ROUTING SCHEMATICÐ2.5L 4 CYLINDER
ENGINE, VACUUM.....................25-2
ROUTING SCHEMATICÐ4.0L 6 CYLINDER
ENGINE, VACUUM.....................25-3
ROUTING SCHEMATICS, VACUUM HOSE.....25-1
ROUTING, SYSTEM COOLANT..............7-1
RUBBER AND PLASTIC DUCTS/HOSES/
TUBING.............................0-19
RUBBER AND PLASTIC HOSES/
TUBING.............................0-28
RUNNING LIGHTS (CANADA ONLY),
DAYTIME...........................8L-16
RUNOUT..............................16-4
RUNOUT, DISC BRAKE ROTOR............5-31
RUNOUT SPECIFICATIONS................16-4
RUNOUT, TIRE AND WHEEL...............22-8
RUNS ROUGH AND/OR HAS A MISS,
INJECTOR DIAGNOSISÐVEHICLE........14-49
SAFETY CERTIFICATION LABEL, VEHICLE . INTRO.-1
SAFETY LATCH, HOOD.................23-139
SAFETY LATCH STRIKER REPLACEMENT . . . 23-10
SAFETY PRECAUTIONS................23-200
SAFETY PRECAUTIONS, BRAKE.............5-2
SAFETY PRECAUTIONS, CLUTCH...........6-10
SCAN TOOL, DRB; COOLING SYSTEM
........7-5
SCAN TOOL, DRB; EMISSION CONTROL
SYSTEMS
...........................25-2
SCAN TOOL, DRB; FUEL SYSTEM
.........14-51
SCAN TOOL, DRB; IGNITION SYSTEMS
.....8D-10SCHEDULES, MAINTENANCE...............0-5
SCHEMATICÐ2.5L 4 CYLINDER ENGINE,
VACUUM ROUTING....................25-2
SCHEMATIC, AIR CONDITIONING..........24-25
SCHEMATIC, HEATING..................24-24
SCHEMATICÐ4.0L 6 CYLINDER ENGINE,
VACUUM ROUTING....................25-3
SCHEMATICS, BELT.....................7-34
SCHEMATICS, SYSTEM.................14-38
SCHEMATICS, VACUUM HOSE ROUTING.....25-1
SCI RECEIVEÐPCM INPUT..............14-22
SCI TRANSMITÐPCM OUTPUT...........14-26
SCREEN, COWL GRILLE...........23-11,23-139
SCREW ANCHOR AND BUMPER,
LIFTGATE LICENSE PLATE..............23-72
SCUFF PLATE/COWL SIDE TRIM PANELÐ
XJ VEHICLES, FRONT INNER..........23-114
SCUFF PLATESÐXJ VEHICLES,
INTERIOR TRIM PANELS..............23-112
SCUFF PLATESÐXJ VEHICLES, OUTER....23-118
SEAL AND BEARING, AXLE SHAFT.........3-15
SEAL AND BEARING SERVICE, AXLE
SHAFT,..............................3-31
SEAL, COWL WEATHERSTRIP...........23-139
SEALÐDRIVE PLATE SERVICE,
CONVERTERÐPUMP.................21-109
SEAL, FLOW CONTROL VALVE FITTING
O-RING............................19-12
SEAL, LIFTGATE OPENING
WEATHERSTRIP.....................23-70
SEAL REPLACEMENT, ADAPTER HOUSING . . 21-182
SEAL REPLACEMENT, INNER AXLE
SHAFT OIL...........................2-33
SEAL REPLACEMENT, LIFTGATE GLASS
WEATHERSTRIP....................23-163
SEAL REPLACEMENT, MANUAL VALVE
SHAFT............................21-178
SEAL REPLACEMENT, OIL PUMP.........21-189
SEAL REPLACEMENT, PINION; FRONT
SUSPENSION AND AXLE................2-23
SEAL REPLACEMENT, PINION; REAR
SUSPENSION AND AXLES...............3-32
SEAL REPLACEMENT, PINION SHAFT.......3-13
SEAL REPLACEMENT, PITMAN SHAFT......19-35
SEAL REPLACEMENT, TIMING CASE
COVER OIL
......................9-26,9-67
SEAL, TAILGATE WEATHERSTRIP
........23-161
SEAL, WINDSHIELD FRAME
WEATHERSTRIP
....................23-185
SEAL/CROSSMEMBER AIR DEFLECTOR,
COWL WEATHERSTRIP
................23-10
SEALS AND BEARING REPLACEMENT,
PITMAN SHAFT
......................19-32
SEALS, DOOR WINDOW GLASS AND
DOOR OPENING WEATHERSTRIP
........23-62
SEALS, FULL-METAL DOOR
WEATHERSTRIP
....................23-180
SEALSÐIN CAR REPLACEMENT, PITMAN
SHAFT
.............................19-21
SEALS, REAR MAIN OIL
..............9-44,9-84
SEALS, VALVE SPRINGS AND OIL
......9-21,9-62
SEAT BELT INDICATOR
...................8E-4
SEAT BELT REMINDER LAMP
............8E-16
SEAT COMPONENTS, POWER BUCKET
....23-106
SEAT CUSHIONÐXJ VEHICLES, REAR
.....23-107
SEAT CUSHION AND COVER, BUCKET
......23-98
SEAT CUSHION COVERÐXJ VEHICLES,
REAR
.............................23-107
SEAT CUSHION RECONDITIONINGÐXJ
VEHICLES, REAR
....................23-108
SEAT MOTOR REPLACEMENT, POWER
......8R-2
SEAT PLATFORM AND TRACKS, BUCKET
. . . 23-105
SEAT, POWER
..........................8A-1
SEATBACK COVERÐXJ VEHICLES, REAR
. . 23-111
SEATBACK COVER AND FRAME, BUCKET
. . 23-100
SEATBACK LATCH STRIKER AND
BUMPERÐXJ VEHICLES, REAR
........23-111
SEATBACK RECONDITIONING, BUCKET
....23-102
SEATBACK RECONDITIONINGÐXJ
VEHICLES, REAR
....................23-111
SEATBACKÐXJ VEHICLES, REAR
........23-109
SEATS
..............................23-195
SEATS, FRONT BUCKET
.................23-97
JINDEX19
Description Group-Page Description Group-Page Description Group-Page