Downloaded from www.Manualslib.com manuals search engine DO-lT-YOURSELF
• Press spring clip downwards in direction
of arro\lv (1) and fold to rear.
• Take bulb out and insert new bulb so that
the locating lug on the bulb plate engages
the recess in the reflector. The centre one
of the three terminals on bulb is then at the
top.
• Fold spring clip over the bulb plate
and press forwards, until the clip engages .
• Connect plug.
• Start
cap so that after turning the word TOP is at the top or on vehicles with separ
ate main beam headlights guide cover into
the eyes at bottom
and allo w both upper
spring str aps to engage .
•
Have the headlight beam alignment
chec ked .
Side light bulb Fog lights*
• Open bonnet. •
With the flat screwdriver blade (from ve
• Remove headlight cap -see removing hicle
tools) lever out cover trim forwa rds
main headlight bulb. and take out.
• Pull bulb holder out of the reflector.
• Press defective bulb into holder , turn it to
the left
and take it out.
• Insert
new bulb.
• Insert holder in reflector.
• Refit cap -see chang ing main headlight
bulb.
122
Downloaded from www.Manualslib.com manuals search engine DO-lT-YOURSELF
• Disengage spring strap in direct ion of Front turn signals arro w and pull turn signa l out forwards .
• Lever cover trim forwards w ith flat blade
scre
wdri ver (from vehicle tools) and re
move.
• Turn bulb holder in direction of arro w and
tak e off.
•
Press defec tive bulb into socket, turn it
to the left and take it out .
• Insta
ll new bulb and turn it to the right
on to stop.
• Install bulb holder and turn it slight ly to th e r igh t ont o stop.
• Place tu
rn sign al fr om outside with both
retainin g lugs in the rec esse s in body and
allo w spring straps to engage
• Refi t cov er tr im
as d e sCi"lbed under
chang in g fogl ight bUlb.
124
