1993 OLDSMOBILE SILHOUETTE warning

I
Features & Controls
Engine Coolant Temperature Gage
This gage shows the engine coolant
temperature. If the gage pointer moves
into the red area, your engine is too hot!
It means that your engine coolant has overheated.
If you have been operating
your vehicle under normal driving conditions, you should pull off the road,
stop your vehicle and
turn off the engine
as soon as possible.
HOT COOLANT CAN BURN YOU
BADLY!
In Problems on the Road, this manual
shows what to do. See the
Index under
Engine Overheating.
Brake System Warning Light
Your Oldsmobile’s hydraulic brake
system is divided into two parts. If one
part isn’t working, the other part can
still work and stop you. For good braking,
though, you need both parts working
well.
If the warning light goes on, there
could be a brake problem. Have your
brake system inspected right away.
This light should come on as you start
the vehicle.
If it doesn’t come on then,
have it fixed
so it will be ready to warn
you if there’s a problem.
This light will
also come on when you
set your parking brake, and will stay on
if your parking brake doesn’t release
fully.
If it stays on after your parking
brake is fully released, it means you have a brake problem.
I
If the light comes on while you’re
driving, pull off the road and stop
carefully. You may notice that the pedal
is harder to push. Or, the pedal may go
closer to the floor. It may take longer to
stop.
If the light is still on, have the
vehicle towed for service.
(See the Index
under Towing Your Oldsrnobile.)
Your brake system may not be
h working properly if the brake
-kg light is on. Driving with
cllu ,,&e warning light on can lead
to
an accident. If the light is still
on after you’ve pulled off the road
and stopped carefully, have the
vehicle towed for service.
ProCarManuals.com

Anti-Lock Brake System Warning light
With anti-lock, this light will go on
when you
start your engine and may stay
on for three seconds or
so. That’s
normal.
If the light doesn’t come on,
have
it fixed so it will be ready to warn
you if there is a problem.
If the light stays on or comes on when
you’re driving, stop
as soon as possible
and
turn the key off. Then start the engine
to reset the system.
If the light still stays
on, or comes on again while you’re
driving, your Oldsmobile needs service. Unless the regular brake system waming
light is
also on, you will still have brakes,
but not anti-lock brakes.
If the regular
brake system warning light
is also on,
see
Brake System Warning Light earlier
in this part.
If the anti-lock brake system warning
light ever flashes, your anti-lock
brake
system is still working but needs
service.
The anti-lock brake system warning
light
may also come on when you are
driving with a compact spare tire.
If this
happens, the light
means you won’t have
anti-lock until you replace
the compact
spare with a full-size tire.
If the warning
light stays on after you replace the
compact spare with
a full-size tire, or if
it comes on again when you’re driving,
your Oldsmobile needs service.
ProCarManuals.com

Features & Controls
SLIDIP
GAT1
SERVICE
ENGINE SOON
120 U2165
Malfunction Indicator Lamp
(Service Engine Soon Light)
A computer monitors operation of your
fuel, ignition and emission controls
systems. This light should come
on
when the ignition is on but the engine is
not running, as a check to show you it is
working.
If it does not come on at all,
have it fixed right away.
If it stays on, or
it comes
on while you are driving, the
computer is indicating that
you have a
problem.
You should take your vehicle
in for service
soon.
If you keep driving your vehicle
with this light
on, after awhile the
emission controls won’t work
as
well, your fuel economy won’t be
as good and your engine may not
run as smoothly. This could lead to
costly repairs not covered by you1
warranty.
Lifigate Ajar Warning light
The GATE AJAR light on your
instrument panel will come on if your
liftgate is not completely closed.
ProCarManuals.com

' A It can be dangerous to drive
monoxide
(CO) gas can come into
your vehicle. You can't
see or
smell CO. It can cause uncon-
sciousness and even
death.
If you must drive with the liftgate
open:
Make sure all windows are shut.
* Turn the fan on your heating or
cooling system to its highest
speed with the setting on BI-
LEV (Bi-Level) or UPPER.
That will force outside air into
your vehicle.
See the Index under
Comfort Controls.
If you have air vents on or under
the instrument panel, open them
all
the way.
SLIDING DOOR
GATE AJAR
-
I U2173
Sliding Door Ajar Warning Light
With the optional power sliding door,
the SLIDING DOOR light on your
instrument panel will come on if your
sliding door is not completely closed.
ProCarManuals.com

Your Driving and the Road
140
w Road Signs
The road signs you see everywhere are
coded by color, shape and symbols.
It's
a good idea to know these codes so that
you can quickly grasp the basic meaning
or intent of the sign even before you
have a chance to read it.
STOP DO NOT ENTER
Color of Road Signs
Red means Stop. It may also indicate
1
1
:hat some movement is not allowed.
Examples are
Do Not Enter and Wrong
Way.
X4025 I
WRONG
WAY
Green is used to guide the driver. Green
;igns may indicate upcoming freeway
:xits or show the direction you should
urn to reach
a particular place.
RR ADVANCE NARROW NO PASSING
CROSSING BRIDGE ZONE
Yellow indicates a general warning.
Slow down and be careful when
you see
a yellow sign. It may signal a railroad
crossing ahead, a no passing zone, or
some other potentially dangerous
situation. Likewise, a yellow solid line
painted on the road means
Don't Cross.
HOSPITAL
11
Blue signs with white letters show
motorists' services.
ProCarManuals.com

r
Orange indicates road construction or
maintenance. You'll want
to slow down
when
you see an orange sign, as part of
the road may be closed off or torn up.
And there may be workers and
maintenance vehicles around, too.
CANOEING SWIMMING
Brown signs point out recreation areas
or points
of historic or cultural interest.
Shape of Road Signs
The shape of the sign will tell you
something, too.
An octagonal (eight-sided) sign means
Stop. It is always red with white letters.
A triangle, pointed downward, indicates
Yield. It assigns the right of way to
traffic on certain approaches to an
intersection. A
diamond-shaped sign
is a warning of
something ahead-for example, a curve,
steep hill,
soft shoulder, or a narrow
bridge.
A triangular sign also is used on two-
lane roads to indicate a
No Passing
Zone. This sign will be on the left side
of the roadway.
ProCarManuals.com

m%p&:*g%
REVERSIBLE LANE ON MULTILANE ROADWAY
Many city roads and expressways, and
even bridges, use reversible-lane traffic
control during rush hours.
A red X light
above a lane means no driving in that
lane at that time. A green arrow means
you may drive in that lane.
Look for the
signs posted to warn drivers what hours
and days these systems are in effect.
~ ~~~
NO PASSING ZONE
Pavement Markings
Pavement markings add to traffic signs
and signals. They give information to
drivers without taking attention from the
roadway.
A solid yellow line on your
side of the road or lane means
Don’t
Cross.
Your Own Signals
Drivers signal to others, too. It’s not
only more polite, it’s safer
to let other
drivers know what
you are doing. And
in some places the law requires driver
signals.
Turn and Lane Change Signals:
Always signal when you plan to turn or
change lanes.
If necessary, you can use hand signals
out the window: Left arm straight out
for a left turn, down for slow or about-
to-stop, and up for a right turn.
Slowing Down: If time allows, tap the
brake pedal once or twice in advance of
slowing or stopping. This warns the
driver behind you.
Disabled: Your four-way flashers signal
that your vehicle is disabled or
is a
hazard. See the
Index under Hazard
Warning Flashers.
Traffic Officer
The traffic police officer is also a source
of important information. The officer’s
signals govern, no matter what the
traffic lights
or other signs say.
The next section discusses some
of the
road conditions you may encounter.
143
ProCarManuals.com

Your
i
Anti-Lock Brakes (CONE)
This light on the instrument panel will
go on when you start your vehicle.
Your anti-lock brake system has
a two-
part system check:
When you start your vehicle and begin
to drive away you may hear a
momentary motor or clicking noise
and you may even notice that your
brake pedal moves a little while this is
going on. This is the
ABS system
testing itself. (You may
also hear this
noise if you leave the ignition in the
Run position for about four seconds
before starting the vehicle.)
If you have your foot on the brake
pedal, this check won’t happen until
the vehicle goes about
4 mph (6 Wh)
or until you take your foot off the
brake pedal.
You’ll also hear a clicking noise the
next time the vehicle goes about
4
mph (6 Wh).
If there’s a problem with the anti-lock
brake system, the anti-lock brake system
warning light will stay on
or flash. See
the
Inda under Anti-Lock Brake System
Warning Light.
Here’s how anti-lock works. Let’s say
the road is wet. YOU’E driving safely.
Suddenly
an animal jumps out in front
You
slam on the brakes. Here’s what
happens with
ABS.
A computer senses that wheels are
slowing down. The computer separately
works the brakes at each front wheel
and at the rear wheels.
The anti-lock system can change the
brake pressure faster than any driver
could. The computer is programmed to
make the most of available tire and road
conditions.
of you.
ProCarManuals.com