1993 CHEVROLET S10 ECU

Downloaded from www.Manualslib.com manuals search engine AM150035
A
Never hold a baby in your arms while riding in a vehicle. A baby
doesn’t weigh much-until a crash. During a crash a baby wil\
l
become
so heavy you can’t hold it. For example, in a crash at only
25 mph (40 kmlh), a 12-pound (5.5 kg) baby will suddenly become a
240-pound
(11 0 kg) force on your arms. The baby would be almost
impossible
to hold.
Secure the baby in an infant restraint.
1-25

Downloaded from www.Manualslib.com manuals search engine Child Restraints
Be sure to follow the instructions for the restraint. You may find these
instructions on the restraint itself
or in a booklet, or both. These restraints
use the belt system in your vehicle, but the child also has
to be secured
within the restraint
to help reduce the chance of personal injury. The
instructions that come with the infant
or child restraint will show you how to
do that.
The child restraint must be secured properly in the center (e\
xcept 60/40 bench seat) or right front passenger seat.
If you have a 60/40 split-bench
seat, you must use the right front passenger seat.
I CAUTION
A
An unsecured child restraint can move around in a collision or
sudden stop and injure people in the vehicle. Be sure to properly
secure any child restraint in your vehicle-even when no child is in
it.
~~
Top Strap
1-26
AN155001
If your child restraint has a top strap, it should be anchored. If you need to
have an anchor installed, you can ask your
GM dealer to put it in for you. If
you want to install an anchor yourself, your dealer can tell you how to do it.

Downloaded from www.Manualslib.com manuals search engine Securing a Child Restraint in the Center Front Seat Position (Bench Seat-Except
60140 Split-Bench Seat)
KO891
Don’t use child restraints in the center position of a 60/40 split-bench seat.
When you secure a child restraint in a center seating position, you’ll be using
the lap belt. See the earlier part about the top strap
if the child restraint has
one.
1. Make the belt as long as possible by tilting the latch plate \
and pulling it
along the belt.
AN163060
1-27

Downloaded from www.Manualslib.com manuals search engine Seats & Safety Belts
2. Put the restraint on the seat. Follow the instructions for the child
restraint.
3. Secure the child in the child restraint as the instructions say. c
4. Run the vehicle’s safety belt through or around the restraint. The child
restraint instructions will show you how.
AM163061
5. Buckle the belt. Make sure the release button faces upward or \
outward,
6. To tighten the belt, pull its free end while you push down on the child
so you’ll be able to unbuckle it quickly if you ever need to.
restraint.
7. Push and pull the child restraint in different directions to be sure it is
secure. If the child restraint isn’t secure, turn the latch \
plate over and
buckle it again. Then see
if it is secure. If it isn’t, secure the restraint in
a different place
in the vehicle and contact the child restraint maker for
their advice.
To remove the child restraint, just unbuckle the vehicle’s safe&\
belt. It will be
ready to work for an adult or larger child passenger,
1-28
I.
.. .
.

Downloaded from www.Manualslib.com manuals search engine Seats & Safety Belts
Securing a Child Restraint in the Right Front Seat Position
KO833
You’ll be using the lap-shoulder belt. See the earlier part about the top strap
if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions for the\
child
2. Secure the child in the child restraint as the instructions say.
3. Pull out the vehicle’s safety belt and run the lap part th\
rough or around
the child restraint. The child restraint instructions
will show you how. See
if the shoulder belt would go in front of the child’s face or neck. If so,
put it behind the child restraint.
restraint.
!
AN165021
1 -30

Downloaded from www.Manualslib.com manuals search engine 4. Buckle the belt. Make sure the- release button faces upward or outward,
5. Pull the rest of the lap belt all the way out of the retractor to set the
so you'll be able to unbuckle it quickly if you ever need to.
lock.
AN165148 AN1 65027
6. To tighten the belt, feed the lap belt back into the retractor w\
hile you
push down on the child restraint.
AN165146
7. Push and pull the child restraint in different directions to be sure it is
secure.
1-31

Downloaded from www.Manualslib.com manuals search engine Tailgate
KO216
You can open the tailgate by pulling up on the handle while pulling the
tailgate down.
When you put the tailgate back up, be sure it latches securely.
Horn
KO223
Press the pad in the center of the steering wheel to sound the horn.
2-33

Downloaded from www.Manualslib.com manuals search engine Comfort Contmls & Audio Systems
4. Press the 1 and 4 buttons together. Hold them down until “- - -” shows
on the display.
You are now ready to enter your secret code. Don’t wait more than
15
seconds between steps.
5. Press SET and 000 will appear on the display.
6. Press the SEEK b button to make the first number appear.
7. Rotate the TUNE knob right or left to make the last two numb\
ers agree
8. Press BAND and 000 will appear again. Now you are ready to enter the
9. Repeat steps
6 and 7 for the last three digits of your code.
with your code.
last three digits of your code.
IO. Press BAND and rEP will appear for 5 seconds and then 000 will
11. Repeat steps 6 through 10. This time SEC will appear-indicating that
To Unlock The System Afier A Power Loss
When battery power is reapplied to a secured radio, the radio won’t turn on
and LOC will appear on the display.
Enter your secret code as follows: pause no more than
15 seconds between
steps. appear.
the radio is secure.
1. Turn the ignition on. (Radio off.)
2. Depress the SET button. The display will show 000.
3. Enter the six digits of the code following steps 6-9 above. The display
will show the numbers as entered.
4. Depress the BAND knob and the time appears-indicating that the \
disabling sequence was successful.
If the display indicates SEC, the
numbers did not match and the unit is still secured.
Disabling The Theft System
1. Depress presets 1 and 4 for 5 seconds with ignition on and radio power
off. The display will show SEC, indicating the unit is in the secure mode.
2. Depress the SET button. The display will show 000.
3. Enter the first three digits of the code following steps 6 and 7 of the
preceding paragraphs. The display will show the numbers as entered.
3-24