Page 118 of 358
Comfort Controls & Audio Systems
(OPTION)
The rear window defogger uses a
warming grid to remove fog from the rear
window.
Press the right side of the switch to turn
on the defogger. An indicator light will
come on to remind you that the defogger
is on. The defogger
will turn off
automatically after about ten minutes of
use. If you
turn it on again, the defogger
will operate for about five minutes only.
You can also turn the defogger off by
pressing the left side
of the switch.
Do not attach anything like a temporary
vehicle license or a decal across the
defogger grid on the rear window.
lsomething else sharp on the inside
of the rear window. ^If you do, you
could cut or damage the warming
grid, and the repairs wouldn't be
I
System
Your Chevrolet's flow-through ventilation
system supplies outside air into the
vehicle when
it is moving. Outside air
will also enter the vehicle when the heater
or the air conditioning fan is running.
ProCarManuals.com
Page 119 of 358
Ventilation Tips
Keep the hood and front air inlet free
of ice, snow, or any other obstruction
(such as leaves). The heater and
defroster will work far better, reducing
the chance of fogging the inside of
your windows.
When you enter a vehicle
in cold
weather, turn the fan control knob to
the right for
a few moments before
driving off. This helps clear the intake
ducts of snow and moisture, and
reduces the chance of fogging the
inside
of your windows.
D Keep the air path under the front seats
clear of objects. This helps air to
circulate throughout your vehicle.
Audio Systems
Your Delco@ audio system has been
designed to operate easily and give years
of listening pleasure. But you will get the
most enjoyment out of
it if you acquaint
yourself
with it first. Find out what your
Delco@ system can do and how to operate
all its controls, to be sure you’re getting
the most out of the advanced engineering
that went into
it.
ProCarManuals.com
Page 120 of 358

Comfort Controls & Audio Systems
I Setting the Clock noise is almost undetectable AM/FM Stereo with Cassette Tape
until it is too late. Your hearing can
adapt
to higher volumes of sound. sure you can add what you want. If
Player
you can, it’s very important to do it 1. Press SET. Sound that Seems normal can be
Ioud and harmful to your hearing.
Take precautions by adjusting the
volume
control on your radio to a
safe sound level before your hearing
adapts
to it.
To help avoid hearing loss or 31
damage:
a Adjust the volume control to
the lowest setting. properly.
Added
sound equipment
may interfere
with the operation of
your vehicle’s engine, Delco@ radio
or other systems, and even damage
them. And, your vehicle’s systems may interfere
with the operation of
sound equipment that has been
added improperly.
So, before adding sound
equipment, check with your d er
2. Within five
seconds, press and hold
SEEK until the correct hour
appears.
correct minute appears.
3. Press and hold SEEK A until the
Delco/Bose AM/FM Stereo with
Compact Disc Player
1. Press SET.
2. Within five seconds, press and hold
SEEK 4 until the correct hour I, Increase volume slowly until
you
hear comfortably and appears.
clearly. 3. Press and hold SEEK until the
1116 correct minute appears.
ProCarManuals.com
Page 122 of 358

Comfort Controls & Audio Systems
Pushbuttons
The four pushbuttons let you return to
your favorite stations. You can preset
up
to 14 stations (7 AM and 7 FM).
To set the pushbuttons for up to eight
stations (four
AM and four FM), just:
1. Tune in the station.
2. Press SET. (“SET” will appear on the
display for about five seconds.)
3. Within five seconds, press one of the
four pushbuttons. Whenever you press
that button, the preset station
will
return.
Repeat these steps for each pushbutton. You
can preset three more stations on
each band by pressing
a pair of buttons
next to each other
at the same time. Just:
1. Tune in the station.
2. Press SET. (“SET” will appear on the
display for about five seconds.)
3. Within five seconds, press two
pushbuttons next to each other
at the
same time. Whenever you press
that
pair of buttons, the preset station will
return.
Repeat these steps for each pair of
pushbuttons.
Setting the Tone
Bass: Slide the BASS lever up to hear
more bass,
Treble: Slide the TREB lever up to hear
more treble.
If a station is weak and noisy, move
TREB down to reduce the noise.
ProCarManuals.com
Page 124 of 358

Comfort Controls & Audio Systems
Automatic Program Search
When you push APS you can go to the
beginning of a new selection.
0 To go forward to the beginning of the
next selection, press
.
To go back to the beginning of the
current selection press
4 . Push 4
again to go to the beginning of the
previous selection.
Program
Press the upper knob on your system to
switch from one side
of the tape to the
other.
Your cassette tape player can play
continuously because the player has an
auto-reverse feature.
Eject
Press STOP-EJECT to remove the tape
or stop the tape and switch to the radio.
Cr02 (Delco/Bose System)
The Cr02 button lets you set the system
for the type
of cassette being used. If you
are using chrome or metal tapes, push
Cr02 in. If you are using standard tapes,
make sure
CrO2 is out.
Noise Reduction (Delco/Bose System)
Your sound system has the Dolby@
automatic noise reduction feature.
Dolby@ Noise Reduction is manufactured
under license from Dolby Laboratories
Licensing Corporation.
Dolby and the
double-D symbol are trademarks
of
Dolby Laboratories Licensing
Corporation.
... 120
ProCarManuals.com
Page 126 of 358

Comfort Controls & Audio Systems
... 122
Setting the Tone
Bass:
Press BASS A or BASS to hear
more or less bass.
Treble: Press TREB A or TREB v to
hear more or less treble.
For the clearest sound, keep both of these
adjusted all the way up. If a station is
weak and noisy, press
TREB v to reduce
the noise.
Adjusting the Speakers
Balance:
Turn the balance control behind
the upper knob to move the sound
between the right and left speakers.
Fade: Turn the fade control behind the
lower knob to move the sound between
the front and rear speakers.
I’o Play a Compact Disc
Before you begin, please note: don’t use
:he mini-discs that are called “singles.”
rhey won’t eject. Use full-size compact
jiscs.
With the audio system on, insert a disc
into the slot
with the label side up. “CD”
will appear on the display and track 1 will
begin to play. If
the disc comes back out and
“ERR” appears on the display, it could be
that:
The disc is upside down.
It is dirty, scratched, or wet.
There’s too much moisture
in the
air.
You are driving on a very rough
road.
The temperature
is too hot or too
cold.
ProCarManuals.com
Page 128 of 358

Comfort Controls & Audio Systems
To Stop the Disc Player
0
0
Turn the power off or turn the ignition
key off. The disc stays in the player
and will resume playing at the point
where
it stopped.
Press
ST-PL to stop playing the disc
and switch to radio. Press ST-PL to
restart the disc at the point where
it
stopped.
Press
EJCT to eject the disc and the
radio will play. The disc
will start
playing at track
1 when you reinsert it.
Theft-Deterrent Feature
Delco-Loc I1 is a security feature for the
compact disc player. It can be used or
ignored. If ignored, the system functions
normally.
If it is used, your system won’t
be usable
if it’s ever stolen.
Setting Your Security Code
The instructions below tell you how to
enter a security
code into the system. If
your vehicle loses battery power for any
reason,
you must enter the security code
again before the system
will turn on.
1. Write down any six digit number and
2. Turn the ignition switch to the Acc
3. Turn the audio system off.
4. Press and hold 1 and 4 together until
keep it in a safe place.
or
Run position.
“---” shows on the display.
I. 9 124
ProCarManuals.com
Page 129 of 358

You are now ready to enter your security
code. Don’t wait more than 15 seconds
between steps.
5. Press SET and “000” will appear on
the display.
6. Press SCAN and hold until the first
digit
of your code appears. Release
the button.
7. Press SEEK 4 or b and hold until
the second and third digits
of your
code appear. Release the button.
8. Press the lower knob and “000’ will
appear. Now you are ready to enter
the
last three digits of your code.
9. Press SCAN and hold until the
fourth digit
of your code appears.
Release the button.
10. Press SEEK 4 or b and hold until
the fifth and sixth digits of your code
appear. Release the button.
11. Press the lower knob. “rEP’ will
appear for five seconds, and then
“000” will appear.
12. Repeat steps 6 through 11. “SEC”
will appear. This means that your
audio system is secured.
Shutting Off the Theft-Deterrent
Feature
If your audio system is secured (“SEC”
shows on display) and you wish to disable
it, enter your security code as follows,
pausing no more than
15 seconds between
steps:
1. Turn the ignition on. Make sure the
audio system is off. The time
will
show on the display.
seconds.
“SEC” will show on the
display.
display.
2. Press 1 and 4 together for five
3. Press SET. “000” will appear on the
ProCarManuals.com