1993 CADILLAC FLEETWOOD width

Downloaded from www.Manualslib.com manuals search engine I
Q: What's wrong with this?
n
~~ ~
A: The belt is twisted across the body.
.-
.. -
Q
You can be seriously injured by a-twisted belt.%i a crash, you
wouldn't have the full width of the belt to spread impact forces.
If a belt is twisted, make it straight
so it can work properly, or
-. h d
I.
n
LP ha
r
-
U If
I
ask your dealer to fix it.
UI
-
26

Downloaded from www.Manualslib.com manuals search engine Wheel Replacement
Replace any wheel that is bent, cracked or badly rusted. If wheel nuts
keep coming loose, the wheel, wheel bolts, and wheel nuts should be
replaced.
If the wheel leaks air out, replace it (except some aluminum
wheels, which can sometimes be repaired). See your Cadillac dealer if any
of these conditions exist.
Your dealer will know the kind
of wheel you need.
Each new wheel should have the same load carrying capacity, diameter,
width, offset, and be mounted the same way as the one it replaces.
If you need to replace any of your wheels, wheel bolts, or wheel nuts,
replace them
only with new GM original equipment parts. This way, you
will be sure to have the right wheel, wheel bolts, and wheel nuts for your
Cadillac model.
I
A CAUTION:
Using the wrong replacement wheels, wheel bolts, or wheel nuts
on your vehicle can be dangerous. It could affect the braking
and handling
of your vehicle, make your tires lose air and make
you lose control. You could have a collision in which you or
others could be injured. Always use the correct wheel, wheel
1 bolts, and wheel nuts for replacement.

Downloaded from www.Manualslib.com manuals search engine Bore.. .................................... 101.6 mm (4.00 in)
Stroke
.................................... .88.4 mm (3.48 in)
Compression Ratio
................................... 9.683
Cylinder Block
.................................... Cast Iron
Cylinder Head
.................................... Cast Iron
Intake Manifold
.............................. Cast Aluminum
Valve System
................................ Hydraulic Lifters
Intake Valve
.............................. .49.28 mm (1.94 in)
Exhaust Valve
............................. .38.10 mm (1.50 in)
Pistons
........................................... Cast Alloy
Firing Order
.................................. 1-8-4-3-6-5-7-2
LeftBank
.......................................... 1-3-5-7
Right Bank
......................................... 2-4-6-8
Camshaft (Width)
.......................... 15.87 mm (.625 in)
Camshaft (Pitch)
........................... 12.70 mm (SO0 in)
Connecting Rods (Length)
................... 144.78 mm (5.7 in)
Crankshaft
............................................ Cast
Main Bearings
......................................... Five
ENGINE LUBRICATION SYSTEM
Oil Pressure @ 1000 rpm ..................... 6.0 psi (41.2 kPa)
Type
of Intake. .................................... Stationary
Filter System
...................................... Full-Flow
ENGINE COOLING SYSTEM
Radiator Cap Relief Pressure ................... 15 psi (104 kPa)
Thermostat Starts To Open
...................... 181°F (83OC)
Water Pump Type ................................. Centrifugal
Drive Belt
....................................... Serpentine
Radiator Core
................................. Copper-Brass
Radiator Cooling Fans
............................... Electric
Radiator Cooling Fan (H.D.)
....................... Centrifugal
FUEL SYSTEM
Induction Type ................... Throttle Body Injection (TBI)
System Pressure
.......................... .9-12 psi (62-90 kPa)
Idle Speed
.................................. ECM Controled
Filter Type
............................... Paper Type Element
322
F
Y
r
Li
n
U
n

Downloaded from www.Manualslib.com manuals search engine Generator ........................................ 140 AMP
Regulator
................................ Integral Solid State
AIR CONDITIONING SYSTEM
Refrigerant-12 (R-12) ......................... 3.125 lb (1.4 kg)
Not all air conditioning refrigerants are the same.
If the air condi-
tioning system in your vehicle needs refrigerant, be sure the proper
refrigerant
is used. If you're not sure, ask your Cadillac dealership. ~~ ... -- 1 ..-i ~ ,
FLUID CAPACITIES
Auto Trans (4L60) Pan Removal .................. 5 qts. (4.7 L)
.Auto Trans (4UO Overhaul (245mm Torq. Conv.)
.... 8 qts. (7.9 L)
.,Auto Trans (4MO Overhaul (298mm Torq. Conv.)
. . 11 qts. (10.6 L)
.Engine Oil
.......... .-. ....................... 4.0 qts. (3.8 L)
"With Filter Change
............................ 5.0 qts. (4.7 L)
Engine Cooling ...............................
.Engine Cooling System (H.D.) ...................
'Fuel Tank ................................. 23 gallons (87.1L)
.Power Steering
................................. .2 qts. (1.9 L)
lRearAxle
....................................
'Washer Solvent ................................
TIGHTEN TORQUE
"Spark Plug ................................ 15 N-m (11 lb. ft.)
Oil Pan Drain Plug .......................... 41 N-m (30 lb. ft.)
'Wheel Lug Nut. .......................... 135 N-m (100 lb. ft.)
:Re,ar Axle.Filler.Plug ......... ........................ 35 N.m (26 lb. ft.)
, :+- 8 i - ' .. ~, . > ._ , ,-
KlEHICLE DIMENSIONS
Shipping Weight (Fleetwood Brougham) ...... .4361 lbs. (1978 kg)
'Wheel
Base ................................ 121.5 in (3085 mm)
Shipping Weight (Fleetwood) ................ .4295 lbs. (1948 kg)
'Length
.................................... .224 in (5696 mm)
Height ..................................... .57 in (1451 mm)
Width
...................................... .77 in (1952 mm)