Page 169 of 406

Downloaded from www.Manualslib.com manuals search engine To Adjust The Tone (Bass or Treb)
Press Bass A to increase bass, or Bass v to decrease. (Press the center to
get
a recommended setting).
Press Treb
A to increase treble, or Treb to decrease. (Press the center to
get a recommended setting).
-
To Balance The Front And Rear Speakers (Fade)
Press Fade A to increase the sound in the front, or Fade v to increase the
sound in the rear. (Pressing in the center balances the sound.)
The sound
is factory-balanced between the left and right speakers, so
there is no button for that.
To Play a Compact Disc
Before you begin, please note: don’t use the mini-discs that are called
“singles”. They won’t eject. Use full-size compact discs.
If the disc player is very hot, or if you’re driving on a very rough road, a
disc may come out, not play or skip.
As soon as things get back to normal, the disc should play again.
Press Power to turn the system on.
r
rn
..
If the disc comes back out, check whether:
0 The disc is upside down
a It is dirty, scratched, or wet
c..
Insert a disc partway
into the slot, label side
up. The player will pull
-
it in. Wait a few
seconds and the disc
should play.
-
k..
Page 170 of 406

Downloaded from www.Manualslib.com manuals search engine - 0 There’s too much moisture in the air (If there is, wait about one hour
and try again).
7 Rcl (Recall)
Press “Rcl” button to see what track is playing. Press it again within 5
seconds to see how long it has been playing.
The track number also appears when you change the volume or when a
new track starts to play.
-
~ Prev (Previous)
Press “Prev” button to play a track again.
~ If you hold this button, or press it more than once, the disc will return to
previous tracks.
Press “Next” button to hear
the next track now (instead of waiting until
the present track is finished).
If you hold this button, or press it more than once, the disc will advance
further.
-
-
Rev (Reverse)
Press and hold “Rev” button to return rapidly to a favorite passage.
Release it to play the passage.
FF (Fast Forward)
Press and hold “FF” button to advance quickly within a track. Release it
to resume playing.
Comp (Compression)
157
Pressing the “Comp” button makes soft and loud passages more nearly
_I equal in volume.
Page 171 of 406
Downloaded from www.Manualslib.com manuals search engine To stop the disc player:
Press the Dower button or turn the ignition key off. The disc stays in
the player and will resume playing at the point where
it stopped.
OR
I
L
.. . ._
I . -. - . .^.
Press St/Pl
(Stop/Play). The
disc will stop and
the radio will play.
Press St/Pl to
restart the disc.
It
will resume playing
at the point where
it stopped.
0
OR
Press Ejct. The disc will eject and the radio will play. The disc will start
at track 1 when yuu insert it again.
Settiplg T%e Clock (Cussette Player)
Have the radio CJ~ ignition on. Then:
TO Set the Hour:
Push Set, and within 5 seconds,
Push Scan. Hold it in until the clock gets to the correct hour. Then let
ro Set Minutes:
Push Set, and within 5 seconds,
Push Seek. Hold it in until the clock gets to the correct minute. Then
let go.
Your clock is set.
158 I
Page 172 of 406
Downloaded from www.Manualslib.com manuals search engine Setting The Clock (CD Player)
Have the radio or ignition on. Then:
To Set the Hour:
Push Set, and within 5 seconds,
0 Push Seek. Hold it in until the clock gets to the correct hour. Then let
go*
To Set Minutes:
e Push Set, and within 5 seconds,
0 Push Scan. Hold it in until the clock gets to the correct minute. Then
Your clock is set.
let
go.
To Play This Radio (Export Only)
PWR
To turn the radio on, press the PWR button. _-
159
Page 173 of 406
Downloaded from www.Manualslib.com manuals search engine The control behind the upper knob allows you to balance the sound
between the right and left speakers.
The Lower Knob
Turn the lower knob to tune radio stations. The tune knob increases and
decreases frequency when it
is slightly rotated against the spring load.
Push it to get
AM or FM.
The control behind the lower knob fades the sound between your front
and rear speakers.
RCL
It tells you the time. (When the ignition is off, push RCL to display the
time.) With the radio on, when the time is displayed, push it
to see the
frequency.
SEEK
Pressing the SEEK A or v button will cause the receiver to seek the next
higher or lower station and stop.
SCAN
When you press SCAN, the radio will go to the next station and pause
and keep doing that until you press SCAN again.
Page 174 of 406

Downloaded from www.Manualslib.com manuals search engine - Pushbuttons
The five pushbuttons let you return to favorite stations. You can set the
pushbuttons for up to ten favorite stations
(5 AM and 5 FM). Just:
Tune in the station you want to listen to.
Press the SET pushbutton. (NOTE: The display will show SET for
Within the 5 seconds, push one of the five pushbuttons. SET will
-
about 5 seconds.)
disappear from the display with the station set.
-_
0 Whenever you press that button, the preset station will return.
Clock
To set the clock, just:
0 Press the SET button.
0 Within 5 seconds, press and hold SCAN until the correct hour appears
0 Press and hold SEEK A or until the correct minute appears on the
.~
-.
on the display.
display.
- To Adjust The Tone
Use the levers next to the display to set the bass, midrange, and treble
until you get the sound you want. The
60 and 250 levers adjust the bass;
We suggest you start with the center lever
(E) in the midpoint position.
Then move the others up or down until you get the amount
of bass and
treble you like.
-- 1K is midrange; and 3.5K and 10K control the treble.
c_
To Play a Cassette (Export Only)
Your tape player is built to work best with tapes that are 30 to 45 minutes
long on each side. Tapes longer than that are
so thin they may not work
well in this player.
With the radio on, press a tape into the slot marked
AUTO REVERSE
(tape side goes in first).
161
Page 175 of 406

Downloaded from www.Manualslib.com manuals search engine Once the tape is playing, use the upper and lower knobs for volume,
balance, and fade just as
you did for radio. The arrow in the graphic
display above the word
TAPE indicates which side of the tape is being
played.
PROG
To go from one side of the tape to the other, press the PROG button.
CrOt
This button sets the tape bias. When playing high bias chrome or metal
tapes, press the button to turn the Cr02 on in the graphic display. When
playing standard bias tapes, press again to turn the CrO2
off.
REV
To rapidly reverse the tape, press REV and the tape will rapidly reverse
to the beginning
of the tape or until you press the REV button lightly.
To rapidly advance the tape, press FWD and the tape will rapidly go
forward to the end
of the tape or until you press the FWD button lightly.
PREV
To hear a passage on the tape that has just played, press PREV and the
tape will back up and stop at either the first 4-second quiet spot in the
tape
or when you press PREV again.
NEXT
To go immediately to the next selection on the tape, press NEXT A
4-second quiet interval must be present for the tape to stop.
EJECT
To remove or stop the tape and switch to radio, press the EJECT button.
Page 176 of 406

Downloaded from www.Manualslib.com manuals search engine r
ST-PL
To immediately switch from tape to radio, press the ST-PL button and the
radio will resume playing the station that was tuned in when you inserted
a tape. Pressing
ST-PL again will allow the tape to resume where it
stopped.
Care of Your Cassette Tape Player
A tape player that is not cleaned regularly can cause reduced sound
quality, ruined cassettes, or a damaged mechanism. Cassette tapes should
be stored
in their cases away from contaminants, direct sunlight, and
extreme heat.
If they aren’t, they may not operate properly or cause
failure
of the tape player.
Your tape player should be cleaned regularly each month or after every
15 hours of use. If you notice a reduction in sound quality, try a known
good cassette to see
if the tape or the tape player is at fault. If this other
cassette has no improvement in sound quality, clean the tape player.
Clean your tape player with a wiping-action, non-abrasive cleaning
cassette, and follow the directions provided with it.
Cassettes are subject to wear and the sound quality may degrade over
time. Always make sure that the cassette tape is in
good condition before
you have your tape player serviced.
Care of Your Compact Discs
Handle discs carefully. Store them in their original cases or other
protective cases and away from direct sunlight and dust.
If the surface of
a disc is soiled, dampen a clean, soft cloth in a mild, neutral detergent
solution and clean it, wiping from the center to the edge.