1991 ACURA NSX heating

General Info
Specifications
Maintenance
Engine
Cooling
Fuel and Emissions
’91’92 Models
’93’94 Models
’95’96 Models
*TransaxleSuspension
*Brakes (Including ABS)
*Body
*Heating, Ventilation and
Air Conditioning
*Body Electrical
*Engine Electrical
*SRS
1991-96 NSX Main Menu
As sections w/ * include SRS components,
special precautions are required when servicing.
Steering
’91’94 Models
’95’96 Models
ProCarManuals.com

Bearing Preload

Adjustment

NOTE: If any of the items listed below are replaced, the

bearing preload must be adjusted.

TRANSMISSION HOUSING

CLUTCH HOUSING

DIFFERENTIAL

TAPERED ROLLER BEARING and OUTER RACE

75 mm THRUST SHIM

90 mm WASHER

OIL GUIDE RING

1. Remove the bearing outer race and 75 mm thrust

shim from the transmission housing by prying up

on the bearing outer race or by heating the housing

to about 212°F (100°C).

CAUTION: Do not reuse the thrust shim if the

outer race was pried out.

NOTE:

• If the outer race was removed by heating the

case, let the transmission cool to room tempera-

ture before adjusting the bearing preload.

• Do not heat the transmission housing in excess

of 212° F (100°C).

• Replace the bearing with a new one whenever

the outer race is replaced.

• Repeat on the clutch side.ProCarManuals.com

Bearing Preload

Adjustment

NOTE: If any of the items listed below are replaced, the

bearing preload must be adjusted.

TRANSMISSION HOUSING

TORQUE CONVERTER HOUSING

DIFFERENTIAL

TAPERED ROLLER BEARING and OUTER RACE

75 mm THRUST SHIM

90 mm WASHER

OIL GUIDE RING

1. Remove the bearing outer race and 75 mm thrust

shim from the transmission housing by prying up

on the bearing outer race or by heating the housing

to about 212°F (100°C).

CAUTION: Do not reuse the thrust shim if the

outer race was pried out.

NOTE:

• If the outer race was removed by heating the

case, let the transmission cool to room tempera-

ture before adjusting the bearing preload.

• Do not heat the transmission housing in excess

of 212°F (100°C).

• Replace the bearing with a new one whenever

the outer race is replaced.

• Repeat on the torque converter side.ProCarManuals.com