Downloaded from www.Manualslib.com manuals search engine 
DO-IT-YOURSELF-SERVICE 
IB25-325I 
Front
 turn
 signal / parking
 light
 bulb/ 
front
 side
 marker
 light
 bulb 
• Remove
 the two
 Phillips screws
 and 
take
 off
 the lens cover. 
• Pull
 out
 bulb holder and push down
 the 
rubber boot. 
•
 Press
 spring clip inward
 and
 take
 out 
bulb holder. 
• Give bulb
 a
 left
 turn
 and remove. 
• Replace bulb
 and
 reverse
 the
 above 
procedure
 to
 install bulb holder
 and
 lens 
cover. 
 Rear
 turn
 signal, stop /
 tail
 / 
back-up
 light
 bulb 
• Remove
 the
 four Phillips screws
 and 
take
 off
 lens cover
 with
 bulb housing.  • Squeeze
 the two
 side springs inward 
(arrow)
 and
 lift
 out
 the bulb housing. 
•
 Press
 defective bulb
 into
 bulb holder 
turn
 left
 and take
 out
 bulb. 
• Replace bulb
 and
 reverse
 the
 above 
procedure
 to
 install bulb housing
 with
 lens 
cover. 
132 
 
 
www.westfaliaT3.info  - a  useful  website  for owners  and enthusiasts  of VW  Westfalia  T25 / T3  Campervans   
Downloaded from www.Manualslib.com manuals search engine 
DO-IT-YOURSELF-SERVICE 
Rear
 side
 marker
 bulb 
 • Remove the two Phillips screws and 
take off lens cover. 
• Pull out bulb holder and push down the 
rubber boot. 
•
 Press
 spring clip outward and take out 
bulb holder. 
• Give bulb a
 right
 turn
 and remove. • Replace bulb and reverse the above 
procedure to install bulb holder and lens 
cover. 
 Interior
 light 
• To remove lamp, press against spring 
clip on
 left
 side and
 lift
 out the housing. 
• Take out bulb from between the two 
spring contacts and install new bulb. 
• Install lamp by inserting switch side of 
housing
 into
 cut-out
 first. 
• Then press in the other side
 until
 spring 
clip engages.  License
 plate
 light
 bulb 
There is one bulb housing on each side of  the license plate. Only if both bulbs are 
operative is the license plate properly  illuminated. 
• Take the bulb housing off by pulling it 
down. 
• Remove the two Phillips screws and 
take off lens cover. 
•
 Press
 bulb
 into
 housing,
 turn
 left
 and 
take out. 
• Replace bulb and reverse above proce
dure to install bulb housing and lens cover. 
Make
 sure the spring clip on each side of 
the housing is securely engaged in the 
cutouts provided at upper edge of cross 
 panel. 
133 
 
 
www.westfaliaT3.info  - a  useful  website  for owners  and enthusiasts  of VW  Westfalia  T25 / T3  Campervans