Page 11 of 677
GI JACK AND SAFETY STAND PUSITIONSNEHICLE LIFT (2-SUPPORT TYPE) POSITIONS
JACK AND SAFETY STAND POSITIONS
FRONT END
Jack position:
At the front crossmember Safety stand positions:
On both sides of the body frame
REAR END
Jack position:
At the center of the rear crossmember Safety stand positions:
On both sides of the body frame
At the rear dtierential (4WD)
03UGlX-801 L j 03UGtX-010
VEHICLE LIFT (Z-SUPPORT TYPE) POSITIONS
FRONT END REAR END
Frame Frame
Side sills Side sills
I-
SMUGIX-Cl0
Gl-8 SMUGIX-011
Page 32 of 677

OUTLINE Bl
UUTLlNE OF CONSTRUCTtON
The BP SOHC engine for the 4WD model is the same as for the 2WD model, except that the flywheel is
shaped differently.
The 3P SOHC engine for the ECE specification (without catatyst) 4WD model is the same as the ECE US83
model, except that the fuel and emission control system and the engine electrical system are modified.
(Refer to Sections Ff and G.)
93G08 i -702
SPEClFlCATlONS
Item
TVDG?
Engine/Market ’
AustraIia BP soffc
Europe us-83
1 Without catalyst Gasoline. 4-cvcle
Cyirnder arrangement and number
Combustron chamber
Valve svstem In-line, 4 cylinders
Pentroof
OI-IC, belt-driven
Fi rtng order *
. ..TEN terminal of diagnosis connector grounded. 1-3-4-2
I 93G08 l-704
IN 0: Maintenance-free
mm (in)
EX
0: Maintenance-free Dsplacemenr cc (cu in) 1,839 (112.2)
Bore and stroke mm (In) 83.0 x 85.0 (3.27 x 3.35)
Comoression ratio
Compressron pressure I 8.9
I I kPa (kglcm2, psi)-rpm 1,197 (12.2, 173)300
Valve tlmtng Open BTDC 2O
IN
Close ABDC 5u”
c
Open BBDC so
EX
Close ATDC 8’
Valve clearance
Idle speed -~
Ml-x 750 f 50’ 850 f 50
rpm . I ATX 750 f 50” - I I I ignrtton trming BTDC 1 50 f 10’
1
Bl-3
Page 33 of 677

BI OUTIAlE
INTERCHANGEABILITY
The following chart shows interchangeability of the main parts of the I3P SOHC engine for the 4WD model
and the 2WD model.
Symbols: 9 ._.. Interchangeable X . . . . Not Interchangeable
Part name
j lnterchangeabiIity Remark
[ Cyirnder head 3
i Camshaft oil sea! cl
f Cylinder head bolt 0
Cyirnaer head gasket 0
Cylrnder head cover 0
Cylinder Cylrnder head cover gasket 3
block Cylinder block 0
related
Main bearing cap 0
Main bearing supper!
plate 0
Oil pan G
Trmjng bett cover
’ Front oil seal G
3
Rear oil seal 0
Crankshaft
0
Main bearing 0
Thrust bearing c
Connecting rod and cap 0
1 Connecting rod bearing 0
Crankshaft Piston
0
related
Piston pm cl
PMon ring
0
1 Crankshaft pulley 0
Rear cover 0
Flywheel X Shape different
Flywheel bolt 0
Timing heft
0
Timing belt Timing belt crank pulley
0
related
Camshaft pulley 0
Timing belt tenstoner and spring Cl
Camshaft
0
Rocker arm 0
Rocker arm shalt 0
HLA 0 I
Valve
retated
Lubrication
system
related Valve ’ intake
Exhaust 0
1
0
Valve spring Intake 0
and seat
Exhaust 0
Valve guide
0
Valve seat 9
Oil pump
0
01 gasket pump
0
Oil strainer r.
Oil strainer gasket G
Oil jet
0
Oil filter 0
Cooling
SyStem related
1 I Water pump
Thermostat
Padi ator
, Cooling fan 0
0
X
X Specification drffereni
1 Speclfrcatlon different
03UOBX-805
BY-4
Page 34 of 677
OUTLINE Bl
FLYWHEEL
4WD MODEL
2WD MODEL
The flywheel is shaped differently to accommodate the redesigned clutch disc
and cbtch cover.
Bl-5
Page 58 of 677

c
OUTLINE B2
INTERCHANGEABILITY
The following chart shows interchangeability of the main park of the BP DOHC Turbo engine for the 4WD
model and the BP DOHC Non-Turbo engine for the 2WD model.
Symbols: 5 . Interchangeabie X . . . . Not Interchangeable
Part name interchangeability Remark
1 Cylinder head Shape different
Camshaft oil sea! :
Cylinder head bolt
3
Cyijnder head gasket cl
C$rnder head cover 0
1
Cylinder Cylinder head cover gasket cl
I
Cylinder block 0
block
related Man bearing cap 0
Main bearing support plate 3
OrI pan x Shape different
Trming belt cuver cl
Seal plate 3
Front oil seal I
3
Rear oil seal cl
Crankshaft ‘3
Main bearing 0
Thrust bearing 0
Connecting rod and cap 0
Connecting rod bearing I
0
Crankshaft [ Prston Shape different
related
Piston pin +-- -
c Piston ring cl
Crankshaft pulley 0
Rear cover 3
I Flywheel X Shape different
Flywheel bolt 0
Timing belt
cl
Timing belt Timing belt crank pulley
cl
Camshaft pulley 0 I
related
f Timing belt tensioner and spring
i 0
1, ldter
Camshaft
; Valve timing different
I-LA
Valve I Make - cl
Valve Exhaust 0
related
Vaive sprtng Intake 0
and seat
Exhaust 0
Valve guide cl
Valve seal 0
Oil pump 0
Oil pump gasket 0
Lubrication Oil strainer
0
system Oil strainer gasket
0
related
Oil cooler
0
Oil jet
0
Oil fitter
0
Water pump cl
Cooling
Thermostat
X system Specificatron drfferent
related Radiator X Specificatron different
Cooling fan
X Specification different
^^-^-^ m^- Ix?-5
Page 89 of 677
D OUTLINE
OUTLINE
BUTLINE OF CONSTRUCTION
The
lubrication system of the 323 4WD engine is the same as for the 2WD model.
The Bf DOHC turbocharged engine oil circulation path is different than that of the BP DOtiC non-turbocharged
engine
because of the turbocharger lubrication.
LlJBRICATtON ClRCUlT 93GODX-702
o-2 93GODX.70:
Page 93 of 677
E OUTLINE
OUTLINE
OUTttNE OF CONSTRUCTION
The cooling system in the 323 4WD model is basically the same as in the 323 2WD model.
Although there is no fundamental change from the BP DOHC of the 2WD model, the coolant circulation
path has been changed to direct coolant to the water-cooied turbocharger.
A two-stage thermostat is used in the BP DUHC turbocharged engine to stabilize the engine coolant tem-
peratu re.
The radiator and cooling fan specifications are different. The BP DOHC turbocharged engine of the 4WD
model uses a two-speed electric cooling fan.
93GOEX-704
COOLANT FLOW CHART (BP DOHC TURBO)
E-4
Page 96 of 677
RADIATOR AND COOLING FAN
The radiator and cooling fan specifications are revised.
Specifications
r
EnginelTransaxle BP SOHC 1 BP DOHC Turbo
ATX I
Item MTX MTX 1 Radiator I
Width 647 +
+
Core size
mm (in) H etght 390 t *-
Depth 16 25 e
Fm pnch
mm (in) 1.3 t c
Heat dissipaton capacity kcallh
38,800 43,800 C
Type -
Double tube - Transaxle oil cooler
Heat dissipation capacity
-
kcal/h I 1,650 -
Cooling fan
Number of biades
4 5 +
Outer drameter
mm (in> 320
340 C
Capacity
w-v 80-12 160-12 c
Current
A
1 I 6.6 * 1 Hi : 13.3 + 7 0% max. + Lo: 8.8 + 10% max.
93GOEX-708
OIL COOLER (ATX
;ECTION A-A
4WD MODEL ZWD MODEL
I
DEPTH E-7