Fl FUEL. SYSTEM
FUEL TANK
Removal / inspection I Installation
Warning
l Before performing the following operation, release the fuel pressure from the fuel system to
reduce the possibiIity of injury or fire. (Refer to page Fl-9.)
l When removing the fuel tank, keep sparks, cigarettes, and open flames away from it.
l Before repairing the fuel tank, clean it throughly with steam to remove all explosive gas.
1. Remove in the order shown in the figure.
2. Inspect the fuel tank components visually and repair or replace as necessary.
3. Install in the reverse order of removal, referring to Installation Note.
FUEL PUMP (MAIN) TRANSFERPU
4341 (4.4-6.2, 3245)
GASKET, REPLACE
ET, REPLACE
4it-55 (4.3 -5.6, 3041)
Nm (m-kg, ft-lb)
a?cnc% .7*7
FUEL SYSTEM F2
FUEL TANK
Removal I inspection / Instatlation
Warning
l Before performing the following operation, release the fue1 pressure from the fuet system to
reduce the possibitity of injury or fire. (Refer to page F2-50.)
l When removing the fuel tank, keep sparks, cigarettes, and open flames away from it.
l Before repairing the fuel tank, clean it throughly with steam to remove all explosive gas.
1. Remove in the order shown in the figure.
2. Inspect the fuel tank
components and repair or replace as necessary.
3. tnstall in the reverse order of removal, referring to Installation Note.
FUEL PUMP TRANSFER PUMP
0 SEAL RUBBER, REPLACE 7
A SSL
40-55 (4.1-56, 30-41)
N-m {m-kg, Mb)
93GOF2-771
F2-51
