1988 JEEP CHEROKEE power steering

fuse chart spare wheel engine overheat instrument cluster air conditioning dashboard warning lights

Page 983 of 1378

JEEP CHEROKEE 1988 Service Repair Manual Above 30
F (-1
C) ........ SAE 20W-40 Or 20W-50 API SH/CD

Above 0
F (-18
C) ......... SAE 10W-30 Or 10W-40 API SH/CD

Less Than 60
F (16
C) ............... SAE 5W-

Above 30
F (-1
C) ........ SAE 20W-40 Or 20W-50 API SH/CD

Above 0
F (-18
C) ......... SAE 10W-30 Or 10W-40 API SH/CD

Less Than 60
F (16
C) ............... SAE 5W-30 API SH/CD

Drive Axles ................................ SAE 75W-90 API GL-5

Drive Axles (Trac-Lok) (
2) ................ SAE 80W-140 API GL-5

Drive Axles (Trailer Towing) .............. SAE 80W-140 API GL-5

Hydraulic Clutch ............... DOT 3 (SAE J-1703F) Brake Fluid

Manual Transmission ........................ SAE 75W-90 API GL-5

Parking Brake Cable Guides ................. NLGI Grade 2, GC-LB

Door & Hood Hinges ............................ Light Engine Oil

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Transfer Case ................................... Dexron-IIE ATF

Brake Caliper Bushings ........ GE 661 or DOW 111 Silicone Grease

Caliper Slide Pins ........... GE 661 or DOW 111 Silicone Grease

Wheel Bearings .................. Multi-Purpose NLGI Grade GC-LB

Drive Shaft U-Joints .............. Multi-Purpose NLGI Grade 2EP

Steering Linkage (
4)( 5) .................... NLGI Grade 2, GC-LB

Ball Joints (
4)( 6) ......................... NLGI Grade 2, GC-LB

Weatherstrip .......................... Silicone Spray Lubricant

Wheel Lug Nut Torque ...................... 95 ft. lbs. (129 N.m)

(
1) - SAE 10W-30 SH/CD is preferred.

(
2) - Add 4 ozs. (118 ml) of Limited-Slip differential lubricant

additive when changing fluid.

(
3) - For vehicles operating under heavy-duty towing conditions,

use SAE 75W-140 Synthetic lube.

NOTE: Before using SAE 75W-140 Synthetic the old fluid must

be DRAINED and FLUSHED with clean mineral based axle

lubricant. Then refill with new synthetic lube.

(
4) - Use low pressure grease gun to prevent seal damage.

(
5) - Fill until lubricant squeezes out from the base of seals.

(
6) - Fill ball joint until seal starts to swell.

\
\
\
\
\
\
\

Fluid Capacities

\
\
\
\
\
\
\

Application ( 1) Quantity

Automatic Transmission

1984-86 (904 HD)

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.0 Qts. (7.6L) \

1987-88

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.5 Qts. (8.0L) \

Cooling System (
2)

4-Cylinder .................................. 10.0 Qts. (9.5L)

6-Cylinder ................................. 12.0 Qts. (11.4L)

Engine Oil

4-Cylinder ................................... 4.0 Qts. (3.8L)

6-Cylinder ................................... 6.0 Qts. (5.7L)

Fuel Tank

Standard .................................. 13.5 Gals. (51.1L)

Optional .................................... 20 Gals. (75.7L)

Manual Transmission (
3)

AX4 (AISIN) .................................. 7.4 Pts. (3.5L) \

T4 (Borg-Warner) ............................. 3.9 Pts. (1.8L) \

AX5 (AISIN) .................................. 7.0 Pts. (3.3L) \

T5 (Borg-Warner) ............................. 4.5 Pts. (2.1L) \

Transfer Case

1985-86

Selec-Trac (229 Full-Time) ................. 6.0 Pts. (2.8L) \

Command-Trac (Part-Time 207) ............... 4.5 Pts. (2.1L) \

Page 985 of 1378

$JEEP CHEROKEE 1988 Service Repair Manual Check Drive Shaft Seals \b\ \ \ \ \ \$

Check Drive Shaft Seals

\b\
\
\
\
\
\
\

Lubricate Ball Joints, Steering Linkage & Suspension

\b\
\
\
\
\
\
\

Lube Drive Shaft U-Joints and Slip Splines

\b\
\
\
\
\
\
\

Lube Front Axle Drive Joint and Pivot Bearings (4WD)

\b\
\
\
\
\
\
\

Lubricate Weatherstripping with Silicone

\b\
\
\
\
\
\
\

Lubricate Door Hinges

\b\
\
\
\
\
\
\

Lubricate Door Locks

\b\
\
\
\
\
\
\

Check Body Drain Holes

\b\
\
\
\
\
\
\

Rotate Tires and Adjust Air Pressure

\
\
\
\
\
\
\

Replace

\
\
\
\
\
\
\

Engine Oil

\b\
\
\
\
\
\
\

Oil Filter

\b\
\
\
\
\
\
\

Manual Transmission Fluid

\b\
\
\
\
\
\
\

Automatic Transmission Fluid, Filter and Adjust Bands

\b\
\
\
\
\
\
\

Transfer Case Fluid

\b\
\
\
\
\
\
\

Flush and Fill Engine Coolant, if not done in last 24 months

\
\
\
\
\
\
\

Lubrication Specifications

\
\
\
\
\
\
\

Application Specification

Automatic Transmission .......................... Dexron-IIE ATF

Brake Master Cylinder .......... DOT 3 (SAE J-1703F) Brake Fluid

Engine Coolant ........... Alugard 340-2 & Water (50/50 Mixture)

Engine Oil (
1)

Gasoline Engine

Temperature Range

Above 30
F (-1
C) ........ SAE 20W-40 Or 20W-50 API SH/CD

Above 0
F (-18
C) ......... SAE 10W-30 Or 10W-40 API SH/CD

Less Than 60
F (16
C) ............... SAE 5W-30 API SH/CD

Drive Axles ................................ SAE 75W-90 API GL-5

Drive Axles (Trac-Lok) (
2) ................ SAE 80W-140 API GL-5

Drive Axles (Trailer Towing) .............. SAE 80W-140 API GL-5

Hydraulic Clutch ............... DOT 3 (SAE J-1703F) Brake Fluid

Manual Transmission ........................ SAE 75W-90 API GL-5

Parking Brake Cable Guides ................. NLGI Grade 2, GC-LB

Door & Hood Hinges ............................ Light Engine Oil

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Transfer Case ................................... Dexron-IIE ATF

Brake Caliper Bushings ........ GE 661 or DOW 111 Silicone Grease

Caliper Slide Pins ........... GE 661 or DOW 111 Silicone Grease

Wheel Bearings .................. Multi-Purpose NLGI Grade GC-LB

Drive Shaft U-Joints .............. Multi-Purpose NLGI Grade 2EP

Steering Linkage (
4)( 5) .................... NLGI Grade 2, GC-LB

Ball Joints (
4)( 6) ......................... NLGI Grade 2, GC-LB

Weatherstrip .......................... Silicone Spray Lubricant

Wheel Lug Nut Torque ...................... 95 ft. lbs. (129 N.m)

Page 988 of 1378

JEEP CHEROKEE 1988 Service Repair Manual Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Transfer Case ................................... De

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Transfer Case ................................... Dexron-IIE ATF

Brake Caliper Bushings ........ GE 661 or DOW 111 Silicone Grease

Caliper Slide Pins ........... GE 661 or DOW 111 Silicone Grease

Wheel Bearings .................. Multi-Purpose NLGI Grade GC-LB

Drive Shaft U-Joints .............. Multi-Purpose NLGI Grade 2EP

Steering Linkage (
4)( 5) .................... NLGI Grade 2, GC-LB

Ball Joints (
4)( 6) ......................... NLGI Grade 2, GC-LB

Weatherstrip .......................... Silicone Spray Lubricant

Wheel Lug Nut Torque ...................... 95 ft. lbs. (129 N.m)

(
1) - SAE 10W-30 SH/CD is preferred.

(
2) - Add 4 ozs. (118 ml) of Limited-Slip differential lubricant

additive when changing fluid.

(
3) - For vehicles operating under heavy-duty towing conditions,

use SAE 75W-140 Synthetic lube.

NOTE: Before using SAE 75W-140 Synthetic the old fluid must

be DRAINED and FLUSHED with clean mineral based axle

lubricant. Then refill with new synthetic lube.

(
4) - Use low pressure grease gun to prevent seal damage.

(
5) - Fill until lubricant squeezes out from the base of seals.

(
6) - Fill ball joint until seal starts to swell.

\
\
\
\
\
\
\

Fluid Capacities

\
\
\
\
\
\
\

Application ( 1) Quantity

Automatic Transmission

1984-86 (904 HD)

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.0 Qts. (7.6L) \

1987-88

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.5 Qts. (8.0L) \

Cooling System (
2)

4-Cylinder .................................. 10.0 Qts. (9.5L)

6-Cylinder ................................. 12.0 Qts. (11.4L)

Engine Oil

4-Cylinder ................................... 4.0 Qts. (3.8L)

6-Cylinder ................................... 6.0 Qts. (5.7L)

Fuel Tank

Standard .................................. 13.5 Gals. (51.1L)

Optional .................................... 20 Gals. (75.7L)

Manual Transmission (
3)

AX4 (AISIN) .................................. 7.4 Pts. (3.5L) \

T4 (Borg-Warner) ............................. 3.9 Pts. (1.8L) \

AX5 (AISIN) .................................. 7.0 Pts. (3.3L) \

T5 (Borg-Warner) ............................. 4.5 Pts. (2.1L) \

Transfer Case

1985-86

Selec-Trac (229 Full-Time) ................. 6.0 Pts. (2.8L) \

Command-Trac (Part-Time 207) ............... 4.5 Pts. (2.1L) \

1987

Selec-Trac ................................. 2.5 Pts. (1.2L)

Command-Trac ............................... 2.2 Pts. (1.0L)

1988

Selec-Trac ................................. 3.0 Pts. (1.4L)

Command-Trac ............................... 2.2 Pts. (1.0L)

Drive Axles (
3)

Front ........................................ 2.5 Pts. (1.2L)

Front (Disconnect Housing) .................. 5.0 Ozs. (0.15L) \

Rear ......................................... 2.5 Pts. (1.2L)

Page 991 of 1378

Page 993 of 1378

$JEEP CHEROKEE 1988 Service Repair Manual Lubricate Ball Joints, Steering Linkage & Suspension \b\ \ \ \ \ \$

Lubricate Ball Joints, Steering Linkage & Suspension

\b\
\
\
\
\
\
\

Lube Drive Shaft U-Joints and Slip Splines

\b\
\
\
\
\
\
\

Lube Front Axle Drive Joint and Pivot Bearings (4WD)

\b\
\
\
\
\
\
\

Rotate Tires and Adjust Air Pressure (Including Spare)

\
\
\
\
\
\
\

Replace

\
\
\
\
\
\
\

Engine Oil

\b\
\
\
\
\
\
\

Oil Filter, if it has not been changed in the last 12 months

\
\
\
\
\
\
\

Lubrication Specifications

\
\
\
\
\
\
\

Application Specification

Automatic Transmission .......................... Dexron-IIE ATF

Brake Master Cylinder .......... DOT 3 (SAE J-1703F) Brake Fluid

Engine Coolant ........... Alugard 340-2 & Water (50/50 Mixture)

Engine Oil (
1)

Gasoline Engine

Temperature Range

Above 30
F (-1
C) ........ SAE 20W-40 Or 20W-50 API SH/CD

Above 0
F (-18
C) ......... SAE 10W-30 Or 10W-40 API SH/CD

Less Than 60
F (16
C) ............... SAE 5W-30 API SH/CD

Drive Axles ................................ SAE 75W-90 API GL-5

Drive Axles (Trac-Lok) (
2) ................ SAE 80W-140 API GL-5

Drive Axles (Trailer Towing) .............. SAE 80W-140 API GL-5

Hydraulic Clutch ............... DOT 3 (SAE J-1703F) Brake Fluid

Manual Transmission ........................ SAE 75W-90 API GL-5

Parking Brake Cable Guides ................. NLGI Grade 2, GC-LB

Door & Hood Hinges ............................ Light Engine Oil

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Transfer Case ................................... Dexron-IIE ATF

Brake Caliper Bushings ........ GE 661 or DOW 111 Silicone Grease

Caliper Slide Pins ........... GE 661 or DOW 111 Silicone Grease

Wheel Bearings .................. Multi-Purpose NLGI Grade GC-LB

Drive Shaft U-Joints .............. Multi-Purpose NLGI Grade 2EP

Steering Linkage (
4)( 5) .................... NLGI Grade 2, GC-LB

Ball Joints (
4)( 6) ......................... NLGI Grade 2, GC-LB

Weatherstrip .......................... Silicone Spray Lubricant

Wheel Lug Nut Torque ...................... 95 ft. lbs. (129 N.m)

(
1) - SAE 10W-30 SH/CD is preferred.

(
2) - Add 4 ozs. (118 ml) of Limited-Slip differential lubricant

additive when changing fluid.

(
3) - For vehicles operating under heavy-duty towing conditions,

use SAE 75W-140 Synthetic lube.

NOTE: Before using SAE 75W-140 Synthetic the old fluid must

be DRAINED and FLUSHED with clean mineral based axle

lubricant. Then refill with new synthetic lube.

(
4) - Use low pressure grease gun to prevent seal damage.

(
5) - Fill until lubricant squeezes out from the base of seals.

(
6) - Fill ball joint until seal starts to swell.

\
\
\
\
\
\
\

Fluid Capacities

\
\
\
\
\
\
\

Application ( 1) Quantity

Automatic Transmission

Page 996 of 1378

JEEP CHEROKEE 1988 Service Repair Manual Drive Axles ................................ SAE 75W-90 API GL-5

Drive Axles (Trac-Lok) (
2) ................ SAE 80W-140 API GL-5

Drive Axles (Trailer Towing) .............. SAE 80W

Drive Axles ................................ SAE 75W-90 API GL-5

Drive Axles (Trac-Lok) (
2) ................ SAE 80W-140 API GL-5

Drive Axles (Trailer Towing) .............. SAE 80W-140 API GL-5

Hydraulic Clutch ............... DOT 3 (SAE J-1703F) Brake Fluid

Manual Transmission ........................ SAE 75W-90 API GL-5

Parking Brake Cable Guides ................. NLGI Grade 2, GC-LB

Door & Hood Hinges ............................ Light Engine Oil

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Transfer Case ................................... Dexron-IIE ATF

Brake Caliper Bushings ........ GE 661 or DOW 111 Silicone Grease

Caliper Slide Pins ........... GE 661 or DOW 111 Silicone Grease

Wheel Bearings .................. Multi-Purpose NLGI Grade GC-LB

Drive Shaft U-Joints .............. Multi-Purpose NLGI Grade 2EP

Steering Linkage (
4)( 5) .................... NLGI Grade 2, GC-LB

Ball Joints (
4)( 6) ......................... NLGI Grade 2, GC-LB

Weatherstrip .......................... Silicone Spray Lubricant

Wheel Lug Nut Torque ...................... 95 ft. lbs. (129 N.m)

(
1) - SAE 10W-30 SH/CD is preferred.

(
2) - Add 4 ozs. (118 ml) of Limited-Slip differential lubricant

additive when changing fluid.

(
3) - For vehicles operating under heavy-duty towing conditions,

use SAE 75W-140 Synthetic lube.

NOTE: Before using SAE 75W-140 Synthetic the old fluid must

be DRAINED and FLUSHED with clean mineral based axle

lubricant. Then refill with new synthetic lube.

(
4) - Use low pressure grease gun to prevent seal damage.

(
5) - Fill until lubricant squeezes out from the base of seals.

(
6) - Fill ball joint until seal starts to swell.

\
\
\
\
\
\
\

Fluid Capacities

\
\
\
\
\
\
\

Application ( 1) Quantity

Automatic Transmission

1984-86 (904 HD)

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.0 Qts. (7.6L) \

1987-88

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.5 Qts. (8.0L) \

Cooling System (
2)

4-Cylinder .................................. 10.0 Qts. (9.5L)

6-Cylinder ................................. 12.0 Qts. (11.4L)

Engine Oil

4-Cylinder ................................... 4.0 Qts. (3.8L)

6-Cylinder ................................... 6.0 Qts. (5.7L)

Fuel Tank

Standard .................................. 13.5 Gals. (51.1L)

Optional .................................... 20 Gals. (75.7L)

Manual Transmission (
3)

AX4 (AISIN) .................................. 7.4 Pts. (3.5L) \

T4 (Borg-Warner) ............................. 3.9 Pts. (1.8L) \

AX5 (AISIN) .................................. 7.0 Pts. (3.3L) \

T5 (Borg-Warner) ............................. 4.5 Pts. (2.1L) \

Transfer Case

1985-86

Selec-Trac (229 Full-Time) ................. 6.0 Pts. (2.8L) \

Command-Trac (Part-Time 207) ............... 4.5 Pts. (2.1L) \

1987

Selec-Trac ................................. 2.5 Pts. (1.2L)

Command-Trac ............................... 2.2 Pts. (1.0L)

Page 998 of 1378

$JEEP CHEROKEE 1988 Service Repair Manual \b\ \ \ \ \ \ \ Lube Manual Gearshift Control (4WD Tra$

\b\
\
\
\
\
\
\

Lube Manual Gearshift Control (4WD Transfer Case)

\b\
\
\
\
\
\
\

Inspect/Repack Front Wheel Bearings (2WD Models)

\b\
\
\
\
\
\
\

Inspect Front Brake Pads & Rotors

\b\
\
\
\
\
\
\

Lubricate Caliper Slide Rails

\b\
\
\
\
\
\
\

Inspect Rear Brake Linings & Drums

\b\
\
\
\
\
\
\

Inspect Brake System Hoses & Lines

\b\
\
\
\
\
\
\

Inspect Shocks for Leakage

\b\
\
\
\
\
\
\

Inspect Tire Wear Pattern

\b\
\
\
\
\
\
\

Lubricate Weatherstripping with Silicone

\b\
\
\
\
\
\
\

Lubricate Door Hinges

\b\
\
\
\
\
\
\

Lubricate Door Locks

\b\
\
\
\
\
\
\

Check Body Drain Holes

\b\
\
\
\
\
\
\

Rotate Tires and Adjust Air Pressure

\
\
\
\
\
\
\

Replace

\
\
\
\
\
\
\

Engine Oil

\b\
\
\
\
\
\
\

Oil Filter, if it has not been changed in the last 12 months

\b\
\
\
\
\
\
\

Manual Transmission Fluid

\b\
\
\
\
\
\
\

Automatic Transmission Fluid, Filter and Adjust Bands

\b\
\
\
\
\
\
\

Transfer Case Fluid

\b\
\
\
\
\
\
\

Flush and Fill Engine Coolant, if not done in last 24 months

\
\
\
\
\
\
\

Lubrication Specifications

\
\
\
\
\
\
\

Application Specification

Automatic Transmission .......................... Dexron-IIE ATF

Brake Master Cylinder .......... DOT 3 (SAE J-1703F) Brake Fluid

Engine Coolant ........... Alugard 340-2 & Water (50/50 Mixture)

Engine Oil (
1)

Gasoline Engine

Temperature Range

Above 30
F (-1
C) ........ SAE 20W-40 Or 20W-50 API SH/CD

Above 0
F (-18
C) ......... SAE 10W-30 Or 10W-40 API SH/CD

Less Than 60
F (16
C) ............... SAE 5W-30 API SH/CD

Drive Axles ................................ SAE 75W-90 API GL-5

Drive Axles (Trac-Lok) (
2) ................ SAE 80W-140 API GL-5

Drive Axles (Trailer Towing) .............. SAE 80W-140 API GL-5

Hydraulic Clutch ............... DOT 3 (SAE J-1703F) Brake Fluid

Manual Transmission ........................ SAE 75W-90 API GL-5

Parking Brake Cable Guides ................. NLGI Grade 2, GC-LB

Door & Hood Hinges ............................ Light Engine Oil

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Page 1002 of 1378

JEEP CHEROKEE 1988 Service Repair Manual Door & Hood Hinges ............................ Light Engine Oil

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power St

Door & Hood Hinges ............................ Light Engine Oil

Manual Steering Box ............... Multi-Purpose NLGI Grade 2EP

Power Steering Pump ....................... Power Steering Fluid

Transfer Case ................................... Dexron-IIE ATF

Brake Caliper Bushings ........ GE 661 or DOW 111 Silicone Grease

Caliper Slide Pins ........... GE 661 or DOW 111 Silicone Grease

Wheel Bearings .................. Multi-Purpose NLGI Grade GC-LB

Drive Shaft U-Joints .............. Multi-Purpose NLGI Grade 2EP

Steering Linkage (
4)( 5) .................... NLGI Grade 2, GC-LB

Ball Joints (
4)( 6) ......................... NLGI Grade 2, GC-LB

Weatherstrip .......................... Silicone Spray Lubricant

Wheel Lug Nut Torque ...................... 95 ft. lbs. (129 N.m)

(
1) - SAE 10W-30 SH/CD is preferred.

(
2) - Add 4 ozs. (118 ml) of Limited-Slip differential lubricant

additive when changing fluid.

(
3) - For vehicles operating under heavy-duty towing conditions,

use SAE 75W-140 Synthetic lube.

NOTE: Before using SAE 75W-140 Synthetic the old fluid must

be DRAINED and FLUSHED with clean mineral based axle

lubricant. Then refill with new synthetic lube.

(
4) - Use low pressure grease gun to prevent seal damage.

(
5) - Fill until lubricant squeezes out from the base of seals.

(
6) - Fill ball joint until seal starts to swell.

\
\
\
\
\
\
\

Fluid Capacities

\
\
\
\
\
\
\

Application ( 1) Quantity

Automatic Transmission

1984-86 (904 HD)

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.0 Qts. (7.6L) \

1987-88

Fluid Change ............................... 4.0 Qts. (3.8L)

Overhaul (Dry Fill) ........................ 8.5 Qts. (8.0L) \

Cooling System (
2)

4-Cylinder .................................. 10.0 Qts. (9.5L)

6-Cylinder ................................. 12.0 Qts. (11.4L)

Engine Oil

4-Cylinder ................................... 4.0 Qts. (3.8L)

6-Cylinder ................................... 6.0 Qts. (5.7L)

Fuel Tank

Standard .................................. 13.5 Gals. (51.1L)

Optional .................................... 20 Gals. (75.7L)

Manual Transmission (
3)

AX4 (AISIN) .................................. 7.4 Pts. (3.5L) \

T4 (Borg-Warner) ............................. 3.9 Pts. (1.8L) \

AX5 (AISIN) .................................. 7.0 Pts. (3.3L) \

T5 (Borg-Warner) ............................. 4.5 Pts. (2.1L) \

Transfer Case

1985-86

Selec-Trac (229 Full-Time) ................. 6.0 Pts. (2.8L) \

Command-Trac (Part-Time 207) ............... 4.5 Pts. (2.1L) \

1987

Selec-Trac ................................. 2.5 Pts. (1.2L)

Command-Trac ............................... 2.2 Pts. (1.0L)

1988

Selec-Trac ................................. 3.0 Pts. (1.4L)

Command-Trac ............................... 2.2 Pts. (1.0L)

Drive Axles (
3)

Front ........................................ 2.5 Pts. (1.2L)

Front (Disconnect Housing) .................. 5.0 Ozs. (0.15L) \

Load next 8 pages

Page: < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 49-56 57-64 65-72 ... 80 next >

window fuel pressure technical specifications OBD port rear entertainment mirror