1987 MAZDA 626 ABS

FRONT AXLE
Caliper assembly
Remove the caliper assembly and suspend it.
Tie-rod end
Disconnect the tie-rod end with the SST.
86U09X-012
Stabilizer
Remove the stabilizer bolt.
Wheel speed sensor (ABS)
Remove the speed sensor.
86U09X-014
9—10

9 FRONT AXLE
INSTALLATION
Torque Specifications
11—25 N m (1.1—2.5 m-kg, 8—19 ft-lb)
8 ©
86U09X-021
1. Install the knuckle to the shock absorber.
Tightening torque: 93—117
N
m
(9.5—11.9 m-kg, 69—86 ft-lb)
2. Install the lower arm ball-joint.
Tightening torque: 43—54 N-m
(4.4—5.5 m-kg, 32—40 ft-lb)
3. Install the driveshaft.
86U09X-022
9—14

FRONT AXLE 9
86U09X-023
86U09X-024
86U09X-025
4. Install the stabilizer.
Dimension: 20.1 mm (0.79 in)
Tightening torque: 16—23 N-m
(1.6—2.3 m-kg, 12—17 ft-lb)
5. Install the wheel speed sensor. (ABS)
Tightening torque: 16—23 N-m
(1.6—2.3 m-kg, 12—17 ft-lb)
6. Install the tie-rod end.
Tightening torque: 29—44 N-m
(3.0—4.5 m-kg, 22—33 ft-lb)
86U09X-026
7. Check the end play. (Refer to page 9—8)
End play: 0.2 mm (0.0079 in) max.
8. Stake the lock nut to groove.
9. Install the caliper assembly.
Tightening torque: 78—98 N-m
(8.0—10.0 m-kg, 58—72 ft-lb)
10. Install the wheel.
Tightening torque: 88—118 N-m
(9.0—12.0 m-kg, 65—87 ft-lb)
9-15

REAR AXLE 9
[Drum Brake]
REMOVAL
Remove in the sequence shown in the figure referring to the removal note for the specially marked parts.
86U09X-030
1. Hub cap
2. Lock nut
3. Brake drum
4. Parking brake cable
5. Brake pipe
6. Back plate
7. Trailing link
8. Lateral link
9. Shock absorber
10. Knuckle spindle
11. Brake shoe assembly
Removal Note
Disconnect the brake pipe with the SST.
86U09X-03 I
9—17

REAR AXLE 9
[Disc Brake]
REMOVAL (2WS)
Remove in the sequence shown in the figure.
1. Hub cap
2. Lock nut
3. Caliper assembly
4. Disc plate
5. Wheel speed sensor (ABS)
6. Dust cover
7. Trailing link
8. Lateral link
9. Shock absorber
10. Knuckle spindle
86U09X-039
9-21

REAR AXLE
REMOVAL (4WS)
Remove in the sequence shown in the figure referring to the removal note for the specially marked parts.
86U09X-040
1. Hub cap 7. Control link
2. Lock nut 8. Wheel speed sensor (ABS)
3. Parking brake cable 9. Stabilizer bracket
4. Caliper assembly 10. Tie-rod end
5. Disc plate 11. Shock absorber
6. Dust cover 12. Knuckle spindle
Removal Note
Tie-rod end
Remove the tie-rod end from the knuckle spindle with
the SST.
86U09X-041
9-22

REAR AXLE 9
DISASSEMBLY
Disassemble in the sequence shown in the figure referring to the disassembly note for the specially
marked parts.
1. Oil seal
2. Sensor rotor (ABS)
3. Retaining ring
4. Rear wheel bearing
5. Disc plate
86U09X-042
S 49 0839 425C
49 F027 007
86U09X-087
Disassembly Note
Note
a) Do not remove the hub bolts unless
necessary.
b)Do not reuse the hub bolts if removed.
Sensor rotor (ABS)
Remove the sensor rotor with the SST.
Note
a) Do not remove the sensor rotor unless
necessary.
b)Do not reuse the sensor rotor if removed.
Rear wheel bearing
Remove the rear wheel bearing with the SST.
Note
Do not reuse the rear wheel bearing if
removed.
86U09X-085
9-23

REAR AXLE 9
ASSEMBLY
1. Install new hub bolts.
86U09X-045
2. Install a new sensor rotor with the SST. (ABS)
86U09X-046
3. Install a new rear wheel bearing with the SST.
4. Install the retaining ring.
86U09X-047
5. Install a new oil seal with the SST.
Note
Apply grease to the oil seal lip.
86U09X-048
9—25