4. REMOVE CUPS
(See page BO±25)
Be careful not to damage the clips when removing them
from around the glass.
HINT: It is not necessary to remove the fasteners but dam-
aged fasteners should be replaced.
5. REMOVE WINDSHIELD GLASS
(a) Push piano wire through from the interior.
(b) Tie both wire ends to a wooden block or like o¿¿ect.
HINT: Apply adhesive tape to the outer surface to keep the
surface from being scratched.
NOTICE: When separating, take care not to damage
the paint and interior and exterior ornaments.
To prevent scratching the safety pad when removing
the windshield, place a plastic sheet between the
piano wire and safety pad.
(c) Cut the adhesive by pulling the piano wire around it.
(d) Remove the glass.
NOTICE: Leave as much of the adhesive on the body as
possible when cutting off the glass.
± BODYWindshieldBO±39
