REAR DISC BRAKE (CL14H, CL14HB) - Caliper
Pad Replacement
CAUTION:
When cylinder body IS open, do not depress brake
pedal, or piston will pop out.
1 Disconnect parking brake cable, then remove
pin bolts
2 Remove pad retainer, pads and shims.
SBR840
SBR640
3. When inaalllng pads, retract piston into cylin-
der body by turning
it clockwise
Be careful not to damage piston boot or get oil on
rotor.
Always replace shims when replacing pads.
SBR641
Removal and Installation
Disconnect parking brake cable and brake hose,
then remove caliper assembly
u SBRB41
BR-13
REAR DISC BRAKE (CL14H, CL14HB) - Caliper
1 Remove piston by turning it counterclockwise
with suitable long nose pliers.
SBR646
i--/
2 Pry off ring from piston and remove adjusting
nut
SBR648
3 Disassembly cylinder body
(1) Pry off ring A with suitable pliers, then remove
spring cover, spring and seat
SBR651
rnbly
(2) Pry off rmg B, then remove key plate, push rod
and rod
(3) Removepi Bn seal
Be careful not to damage cylinder body
4. Remove return spring and lever
SBR663
SBR656
SBR657
BR-I 4
