1982 Citroen CX torque

Downloaded from www.Manualslib.com manuals search engine 10 OPERATION No MA. 000 : (;vt/c~ra/ chorac/vris/ics
Weights in kg ( lb )
- Kerb weight I wit/~ iLlI /m/k. oi !IIVI )
.......................................................................
- Weight on the front axle .......................
........................ ........... .......................
- Weight on the rear axle ......................... ....................................................................
- Gross Vehicle Weight
....... ...........................................................................
........... 1300 ( 2866 )
870 ( 1918 )
430 ( 948 )
1790 ( 3946 )
- Maximum authorised weight on the fr-ont axle . . . . . . . . . . . . . . . . . . . . . . . . . . .._..._..._._......._._._....._..._.. 1050 ( 2315 )
- Maximum authorised weight on the rear axle
. . . . . . . . . ..~.. . . . . . . . . . . . . . . . 750 ( 1653 )
- Gross Train Weight (with a 1300 kg ( 2866 lb ) trailer ) . . . . . . . . .
3090 ( 6812 )
- Gross Train Weight ( with a 650 kg ( 1433 lb ) trailer without brakes ) . . . . 2440 ( 5379 )
Towing :
- Maximum weight of trailer without brakes
..... __ ......................................................... 650 ( 1433 )
- Maximum weight of trailer ( within G.T.W. limit of 3090 kg ( 6812 lb ) .....................
1500 ( 3307 )
- Maximum starting gradient ( at G.T.W. ) ..................................................... ..............
12% (1 in8 l/2)
NOTE For towing a trailer heavier than 900 kg ( 1984 lb ). ‘t . 1 1s necessary to fit a second lo-blade electric
cooling fan.
IMPORTANT NOTE : References to trailers without brakes DO NOT APPLY in U.K.
III. GENERAL INFORMATION
Capacities :
- Fuel tank .__._.___..._....__..__...,.._.,.....__________.___.___.___.__.__.__._...................,..... : ._.___.____._. 68 litres ( 15 galls )
- Cooling system f
itfcltrrlivg hcatcr rirlil ) :
- Manual or torque converter gearbox .._..._..__._._,.._..._._.. _..._._._......._......._._._...... 10.6 litres ( 18.6 pts )
- Optional torque converter t air-conditioning unit .._...............................
12.5 litres ( 22 pts )
- Heater unit alone _. _..._._._..,_ _..._.........,....._._._....__.___......... ._. _._._._._....._., .,,._......._. 0.6 litres ( 1.05 pts )
- Engine oil :
- after draining
_..,.._._._....___..._.__....................._._._..._..._....._..._._._................... 4.650 litres (8.2 pts )
- difference between Min. and Max. on dipstick 1.1 litres ( 1.9 pts )
- Hydraulic system ( approx ) _....,_._.__.._._.........,..._..._._.___._......._._._._._._._..................... 4 litres ( 7 pts )
- Gearbox :
_ Overall cspacity ( TOTAL EP 80 ) . . . . . .._.... .._._._..._._._....._._._..._..._... 1.600 litres ( 2.8 pts )
- Difference between Min. and Max. on dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.150 litres ( 0.26 pts )
h) Torque con7~c~rter grarbos :
- Overall capacity ( TOTAL FLUIDE T ) _._._._._.,_...._........_.._.................... 5.5 litres ( 9.7 pts )
- After draining _._,_,_,_.,._.._......_._._._._._._..._..._._._._..._._..__._..._._..................... 2 to 3 litres ( 3.5 to 5.3 pts )
according to draining time
- Difference between Min. and Max. on dipstick (r!,ith
the oil cold) _._,...... 0.150 litres ( 0.26 pts )
-Usable volume of boot .~...............,.........,,............................................. . . 325 dm3 ( 11.48 cu.ft )

Downloaded from www.Manualslib.com manuals search engine OPERATION No MA. 02 : I+ 4’ 0, “‘g 01, Ill<, l1\~c!).ollli(- s\‘sfell~. Op. MA. 02
I To connect a union proceed as follows :
- Position sleeve-seal (( a u lightly coated with
L,HM fluid; this sleeve seal must not reach the
extremity of pipe (( b )).
- Centre the pipe in the housinq by lininq it up
with the axis of the hole, avoidinq all stress.
( Ensure that the end u b )I of the pipe enters
into the smali bore C< c )> j.
Start screwing in the union nut by hand.
- Tiqhten nut moderately : excessive force could
cause a leak because of deformation of the pipe
NOTE Tiqhteninq torques :
3.5 -mm pipe t 5.8 to 6 6 ft lbs
4 5 mm pipe 5 8 to 0 mN ( 0.8 to.0 9 ‘1 kg )
6 6 to 8 0 ft.lbs
6. O-mm pipe
1
9 to 11 mN (0 9 to 1 1 m.kg ) c ) Fittilzg :
I Only use joints of a quality compatible with LHM mineral fluid.
The design of the various seals ensures that their sealing action increases with fluid pressure The oiltiqhtness e
is therefore not improved by greater tiqhtness of the unions
2 To connect a rubber tube a rubber rinq of suitabie diameter has to be positioned between thr, tube and the hose
:
E clip.
0
x
a
A 9, CHECKS ON COMPLETION OF WORK
On completion of work on hydraulic units or the system itself check the followinq :
h) ‘1’11~ C./CJ~~~IIC-C, I~c,lrt,c,c,rt I/J<
pipvs : pipes must not touch one another or any other component, nor may any other
unit, whether fixed or movable, exert any stress on them.

Downloaded from www.Manualslib.com manuals search engine I. CHARACTERISTICS
:
0
u
5 Cooling system : Water cooled.
z
T cx 2000 cx 2200 CX 2400 and Prestige
CX 2400 GTI
- Type ( on engine p’late ) : _..._................... M 20/616 M 22/617 M 23/ 623
M 23/622
Cubic capacity : . . .._......_...............
1985 cc 2175 cc 2350 cc 2350 cc
Transversely mounted, inclined
300 towards the front
Number of cylinders : _........................... 4 (iI/ linr, J 4 Iin linr,)
4 (irr /iUP J 4 f in lin i’ ,
Bore : 86 mm 90 mm 93.5 mm 93.5 mm
- Stroke : .,.,,_,.,.,....____.,.. .._._.....................
85.5 mm 85.5 mm 85.5 mm
85.5 mm
Compression ratio :
9/I 9/l 8.7511 8.7511
Maximum power ( DIN ) : . . . .._................... 102 bhp at 5500 rpm 112 bhp at 5500 rpm 115 bhp ot 5500 rpm
128 bhp at 4800 rpm
Maximum torque (DIN)
: . . 15.5 m.kg (112 ft.Ib ) 17 m.kq (123 ft.Ib) 18.2 m.kg ( 132 ft.Ib)
20.1 mkq (145 ft.Ib)
at 3000 rpm at 3500 rpm at 3000 rpm
at 3600 rpm
Maximum engine rpm in 4th gear :
* 13/62 final drive rtrtio :
5600 rpm 5800 rpm 5900 rpm
*14/61 final drive ratio ( -1 1’175 J 4600 rpm
Maximum engine rpm in 5th gear
(
13,‘62 final drive ratio ) : ,._............,..,........,....,.,........,..,.,..... .._.........,................ .._..._...................
5600 rpm
* NOTE : For CX 2200 and CX 2400 vehicles fitted with a torque converter, the maximum rpm in 3rd gear is 5600 rpm.
: Lubrification :
i
Under pressure, supplied by o gear-type oil-pump driven by the camshaft.
2
External oil filter cartridge ( PURFLUX, LS 105 type ).
d
z
;
i Fuel supply :
a
i a) Engines fitted u~ifh a rnrbuwffor
WEBER compound-type twin choke carburettor (s.ee Operations MA. 142-00, 142-00 a, 142-00 b far the type, and the identification marks )
Dry-type air filter, with filter cartridge.
Mechanical fuel pump, driven by on eccentric on the camshaft.
b) i?ugi,jes ji/f.rd II ith /LIP/ iniPr/ioo :
BOSCH L-Jetronic electronic fuel injection system
Grade of pet,ol to be used : > ._,,,,.,_.._,,,,,.,......... . .._...o....._............................................. K.
99 Orrani ralrrig (FRANCE : Super grade ) (U.K. : 4-star )
Ignition :
Distributor ( DUCELLIER or MARELLI ) driven by the camshaft.
NOTE : The M 23/622 engine with fuel injection is fitted with (I DUCELLIER distributor with a magnetic sensor, and an u AC-DELCO /a electronic module.
- Spark pluqs : .................................................................................................................................... shorf warh
Firing o&r : .................................................................................................................................... 1 - 3 - 4 - 2 f tbu cylinders ale INR&Cd 011 the roc6w COI rr,
Timing :
Side mounted camshaft located in crankcase.

Downloaded from www.Manualslib.com manuals search engine 4 OPERATION No MA. 100-00 : ChargctrJristics and special jeattlws of the engine. II. PARTICULAR FEATURES.
1. Engine sugpension :
4 speed manual gearbox
2 bearers under the engine gearbox unit :
- 1 on the engine side
- 1 on the gearbox side (adjustable by means o/ slots)
2 torque bars at the upper section :
- torque bar on the gearbox side :
- yellow paint mark at (( a ))
- torque bar on the engine side :
- blue paint mark at (( a ))
NOTE : When fitting, position the paint mark uppermost.
5 speed manual gearbox, and torque converter gearbox
bearer under the engine-gearbox unit on the engine
side
(adirrstable OH the subjranra by means oj slots)
vertical flexible mounting on the gearbox side
torque bar at the upper se‘ction
(green paint mark at CC a n to be positioned uppermost
072 jittiug )
NOTE : The 5-speed manual gearbox has a different
vertical flexible mounting from the torque converter
gearbox
a
- Mat7~ral gearbox : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 mm - Manual S-speed gc,arbox and torque cowrvrtcr gearbox : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 mm 2. Crankcase :
a) Cylinder block in oast iron with removeable barrels.
+ 0.05 - Tappet housing bore : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..~.................................................
24 + 0.025 mm

Downloaded from www.Manualslib.com manuals search engine CRANKSHAFT
?c
2
2 amam
aamm
t;
z
NOTE The Replacement Parts Department only supplies one class of crankshaft : AA
- Tight.ening torque for the balance-weight fixing screws : 7.2 to 8 da Nm (52 to 57 34 ft.Ib)

Downloaded from www.Manualslib.com manuals search engine Op. MA. 100-00 7
CRANKSHAFT BEARINGS AND RINGS
Crankshaft end-float . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .....
b.045 to 0.16 mm
+NOTE : On engines fitted with a torque converter gearbox,
the half-rings for adjusting the crankshaft end-float
have an additional lead-tin surface treatment.

Downloaded from www.Manualslib.com manuals search engine 5. Cylinder head :
Aluminium alloy, with hemispherical combustion chambers.
- Original height : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................ 90 mm
- Overall flatness to within : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...... 0.10 mm
- Flatness between fixing holes to within : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.025 mm
a) Head gasket :
Round clinching (diameter = 92.5 mm ), the identification mark (( CEFILAC 1) or (( COOPERS )) towards the
cylinder head ( 1985 cc ).
Oval clinching; the identification mark (( CEFILAC 1) towards the cylinder head (2175 cc ).
Round clinching (diameter = 96.5 mm ), the identification mark (( CEFILAC )) towards the cylinder head (2350 cc).
TIGHTFNING SEQUENCE
Tiqhtening torques f cold)
Initial tightening . . . . . . . . . . 3 da Nm
( 21 3/‘4 ft.Ib)
Final tightening . . . . . . . . . . . . . 6 to 6.5 da Nm
(43 l/2 to 47ft.Ib)
b) Valve seats :
The valve seats are fitted by temperature
shrinking.
VALVE SEAT WIDTH
INLET
I I I I I I T
17 13 9 5 1 4 8 12 16
EXHAUST

Downloaded from www.Manualslib.com manuals search engine OPERATION No MA. 100-00 : Characteristics and special jeafruvs oj the cvlghv.
Op. MA. 100-00 17
9..Tightening torque :
a) Engine suspension :
4-.spc~~d manrlal gearbox :
7 Torque bar (( Nylstop )) fixing nuts : .............................................................. 8.2 da Nm ( 59 ft.Ib )
- Securing screws for the flexible bearer on the subframe ; ........................ 3 da Nm ( 22 ft.lb)
- Flexible bearer assembly screws :
..................................................... .
........ 10 da Nm (72 ft.lb)
S-sp~~tl n1m11ra1 gca~box. and forq~~c cour,c~rtrr gc~arkos
- Torque bar (( Nylstop )) fixing nuts : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 da Nm (72 ft.lb)
- R:H. flexible mountinq assembly screws : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 da Nm ( 72 ‘ft.lb )
- L.H. flexible bearer assembly screws : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 to 17 da Nm ( 116 to 123 ft.lb )
b) Crankcase :
Screws and nuts securing the timing cover : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 to 1.9 da Nm (10 to 14 ft.lb)
c) Timing :
- Screw on the camshaft thrust bearing : . . . . . . . . . . . .._............................................ 1 .4 to 1 .9 da Nm ( 10 to 14 ft.lb )
- Timing chain guide securing screw : . . . . . . . . . . . ..__................................ . . . . . . . . . . . . . . .
1.4 to 1.9 da Nm ( 10 to 14 ft.lb)
- Timing chain tensioner securing screw : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 to 1 .I da Nm (6.5 to 8 ft.lb )
d) Lubrication system :
- Oil filter mounting ( LOCTITE FRENETANCH ) : ......................................
1 to 1 .5 da Nm ( 7 to 11 ft.lb )
- Oil temperature switch : .................................................................................. 3 to 3.5 da Nm ( 22 to 25 ft.lb )
- Union screw for cylinder head lubrication passage : ..................................
1 to 1 .2 da Nm ( 7 to 9 ft.lb )
- Oil filter cartridge ( SPV
wnrt/r]nctc/rer‘s rmte ) : ............................................ 1 .l to 1 .5 da Nm ( 8 to 11 ft.lb )
- Engine oil drain plug ( lo~!,c,r s/t~/p
co/‘cr) : .................................................. 3.5 to 4.5 da Nm (25 to 32.5 ft.lb)