07-04-08
C-6 Automatic Transmission
07-04-08
PLUG-7256
•
•HANDLE-7217
I DIAL HOUS NG
ASSEMBLY-7E034
POINTER BACK-JP
SHIELD
HOUSING AND LEVER
ASSEMBLY-7C453
ENGAGE FLATS OF STUD IN SLOT OF
ROD BEFORE APPLYING TORQUE
D2034-A
FIG. 10—Manual Linkage—Console Shift—Mustang-Cougar
ACTUATOR LEVER ATTACHING BOLT
Gauge Pin
(No.
43 Drill)
NEUTRAL START
SWITCH
D1812-A
FIG. 11—Neutral Start Switch Adjustments—Console Shift
9. Slide the combination starter
neutral and back-up light switch for-
ward or rearward as required, until
the switch actuating lever contacts the
selector lever.
10.
Tighten the switch attaching
screws and remove the gauge pin.
Check for starting in the park posi-
tion.
11.
Turn the ignition key to the
ACC position and place the selector
lever in the reverse position and check
the operation of the back-up lights.
Turn the key off.
FIG. 72—Neutral Start Switch
Adjustment—Console Shift—
Fairlane-Montego
12.
Position the selector lever re-
tainer to the selector lever housing.
Install the six attaching screws.
13.
Install the cover and dial indi-
cator.
14.
Install the trim panel on the top
of the console. Install the selector
lever handle.procarmanuals.com
