RADIATOR AND GRILLE 13-2
Fig.
1 - Radiator and Shroud - Chevrolet
3.
Remove fan.
4.
Remove bolts along top of radiator support, right and 4.
left radiator hold down clamps, and shroud center
bracket.
5. Remove horns and bolts retaining fan shroud to radi- 5.
ator support.
6. With helper, work radiator and fan shroud from vehi-
cle.
7. Reverse procedure to install. 6.
7.
GRILLE ASSEMBLY-CHEVROLET
Removal (Figs. 6 and 7)
1.
Raise hood and disconnect battery leads. 8.
2.
Remove bumper (Section 14).
3.
Remove bolts securing hood catch assembly to radi-
ator support, hood catch support and tie bar, and re- 9.
move hood catch from vehicle.
Remove screws attaching headlamp bezels to grille
reinforcements, fenders, and filler panel. Remove
bezels and headlamps from vehicle. •
Remove screws and rivits- from each fender trim
plate and remove fender trim plates with reinforce-
ments from vehicle. Refer to Figure 6 for attaching
hardware locations.
Remove rivits securing top of grille to tie bar.
Remove screw and rivits securing bottom" of grille to
filler panel and remove grille. If necessary, remove
nuts attaching name plate to grille and replace name
plate.
Remove screws attaching hood catch support to radi-
ator support and filler panel and remove catch sup-
port from vehicle. -
Remove screws attaching tie bar to fenders, radiator
CHEVROLET CHASSIS SEJMCE MANUAL
