2024 MAZDA CX90 off

How to Use the ElectricParking Brake (EPB)
Applying the Parking Brake Manually
1. Depress the brake pedal.
2.
The parking brake is applied and
the EPB indicator light
in the
instrument cluster and the EPB
switch indicator light turn on.
Releasing the Parking Brake Manually
1. Depress the brake pedal with the vehicle power switched ON or the
hybrid system operating.
2.
When the parking brake is released,
the EPB indicator light
in the
instrument cluster and the EPB
switch indicator light turn off.
NOTE
To release the parking brake when
the vehicle power is switched OFF, it
is necessary to cancel the parking
brake auto operation. If the parking
brake is likely to freeze such as
during cold weather conditions,
cancel the parking brake auto
operation.
When the charging system warning
light in the instrument cluster turns
on, the parking brake cannot be
applied after the vehicle power is
switched OFF. Before switching the
vehicle power OFF, apply the parking
brake manually.
Applying the Parking Brake
Automatically
Switch the vehicle power from ON to
ACC or OFF.
The parking brake is applied and the
EPB indicator light
in the
instrument cluster and the EPB switch
indicator light turn on.
Releasing the Parking Brake
Automatically
Shift-linked release
Shift the selector lever from the P
position to a position other than P
when all of the following conditions
are met.
Hybrid system is operating.Driver’s door is closed.Brake pedal is firmly depressed.
When the parking brake is released,
the EPB indicator light
in the
instrument cluster and the EPB switch
indicator light turn off.
Driving
Electric Parking Brake (EPB)
5-58
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Accelerator-linked release
Depress the accelerator pedal when all
of the following conditions are met.
Hybrid system is operating.Driver’s door is closed.Driver's seat belt is fastened.The selector lever is in the D or R
position.
When the parking brake is released,
the EPB indicator light
in the
instrument cluster and the EPB switch
indicator light turn off.
Convenient Ways to Use
the Electric Parking Brake (EPB)
Enabling/Disabling Shift-Linked
Release
1. Switch the vehicle power ON.
2. Make sure that the parking brake is
applied (EPB indicator light
is
turned on).
3. Continue pulling the EPB switch for 4 seconds or longer.
4. Release the EPB switch once.
5. Immediately continue pulling theEPB switch for 4 seconds or longer.
When the shift-linked release is
enabled, a sound is activated 2
times, the EPB switch indicator light
switches to fast flashing, and then
flashes for a certain period of time.
When the shift-linked release is
disabled, a sound is activated 1
time, the EPB switch indicator light
switches to slow flashing, and then
flashes for a certain period of time.
Driving
Electric Parking Brake (EPB)
5-59
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Canceling the Parking Brake
Automatic Operation
The parking brake automatic operation
returns to automatic operation when
the vehicle power is switched ON.
When canceling the parking brake
automatic operation and parking the
vehicle, shift the selector lever to the P
position and use wheel blocks on the
tires. If one of the following operations
is performed, the parking brake
automatic operation can be canceled
when the vehicle power is switched
from ON to OFF.
Operation method 1
1. Switch the vehicle power ON.
2. Release the parking brake manually.
3. Turn off the AUTOHOLD.
4. Press the EPB switch continuouslyuntil a sound is activated.
5. Release the EPB switch.
6. Switch the vehicle power OFFimmediately after a sound is
activated.
After the parking brake auto
operation is canceled, a warning
sound is activated one time, and
the EPB switch indicator light
switches from illumination to
flashing , and then turns off after a
certain period of time has passed.
Operation method 2
1. Switch the vehicle power ON.
2. Release the parking brake manually.
3. Turn off the AUTOHOLD.
4. With the EPB switch pressed, switch
the vehicle power OFF without
depressing the brake pedal.
After the parking brake auto
operation is canceled, a warning
sound is activated one time, and
the EPB switch indicator light
switches from illumination to
flashing, and then turns off after a
certain period of time has passed.
NOTE
The auto operation may not cancel if
the vehicle is parked on a steep
slope.
When using an automatic car wash
which moves the vehicle with the
front tires mounted, it is necessary to
cancel the parking brake automatic
operation.
Driving
Electric Parking Brake (EPB)
5-60
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

AUTOHOLD
AUTOHOLD is a function to keep the
vehicle stopped by applying the brakes
even if you take your foot off the brake
pedal while the vehicle is stopped. This
function reduces the burden on the
driver while the vehicle is stopped,
such as at traffic lights.
Warning and Cautions for
Using the AUTOHOLD
WARNING
Do not rely completely on the
AUTOHOLD function.
The AUTOHOLD function is only
designed to assist the brake operation
while the vehicle is stopped.
Neglecting to operate the brakes and
relying only on the AUTOHOLD system
is dangerous and could result in an
unexpected accident if the vehicle
were to suddenly move. Operate the
brakes appropriately in accordance
with the road and surrounding
conditions. Note that the vehicle may
move suddenly depending on the
vehicle’s load or if it is towing
something.
Do not release your foot from the
brake pedal while the vehicle is
stopped on a steep grade.
Because there is a possibility of the
vehicle not being held in the stopped
position by the AUTOHOLD function,
the vehicle may move unexpectedly
and result in an accident.
Refrain from using the AUTOHOLD
function on slippery roads such as icy
or snow-covered roads, or unpaved
roads.
Even if the vehicle is held in the
stopped position by the AUTOHOLD
function, the vehicle may move
unexpectedly and result in an accident.
Operate the accelerator pedal, brakes,
or steering wheel appropriately as
necessary.
Driving
AUTOHOLD
5-63
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Immediately depress the brake pedal
in the following case.
Because the AUTOHOLD function is
canceled forcibly, the vehicle may
move unexpectedly and result in an
accident.
The message “Depress Brake Pedal.
Brake Hold Disabled” is displayed on
the instrument cluster and the
warning sound is activated at the
same time.
When parking and before leaving the
vehicle, apply the parking brake.
Otherwise, the vehicle may move
unexpectedly and result in an accident.
When parking and before leaving the
vehicle, shift the selector lever to the P
position and apply the parking brake.
CAUTION
If you stop operating the accelerator
pedal before the vehicle starts driving ,
the force holding the vehicle in the
stopped position may weaken. Firmly
depress the brake pedal or depress the
accelerator pedal to start driving the
vehicle.
How to Use the AUTOHOLD
Operating the AUTOHOLD
The AUTOHOLD becomes operational
and the AUTOHOLD standby indicator
light turns on.
Using the AUTOHOLD
1. Stop the vehicle. When all of the following
conditions are met, the
AUTOHOLD operates and the
AUTOHOLD active indicator light
in the instrument cluster
turns on.
The hybrid system is operating.The driver’s seat belt is fastened.The driver’s door is closed.The parking brake is released.
2. Start driving the vehicle. The brakes are released and the
AUTOHOLD active indicator light
in the instrument cluster
turns off.
NOTE
When about 10 minutes or longer
have passed since the AUTOHOLD
operated, the parking brake is
applied automatically. When the
parking brake is released, the
AUTOHOLD operates again.
Driving
AUTOHOLD
5-64
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

When the vehicle power is switched
OFF while the AUTOHOLD is
operating , the parking brake is
applied automatically.
If the selector lever is shifted to the R
position with the vehicle tilted
rearward or on level ground, the
AUTOHOLD is canceled. Operate
the brakes if necessary.
Under the following conditions, the
parking brake is automatically
applied and the AUTOHOLD is
released. The AUTOHOLD is
re-enabled when the conditions
before the AUTOHOLD is released
are restored.
The driver’s seat belt is unfastened.The driver’s door is opened.
Canceling the AUTOHOLD Operation
1. Depress the brake pedal with the AUTOHOLD operating.
2.
The AUTOHOLD operation is
canceled and the AUTOHOLD
standby indicator light turns off.
NOTE
The AUTOHOLD can be turned off
by pressing the AUTOHOLD switch
while driving.
When the vehicle power is switched
OFF while the AUTOHOLD is
operating , the parking brake is
applied automatically and the
AUTOHOLD is turned off.
Driving
AUTOHOLD
5-65
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Hill Launch Assist (HLA)
The HLA prevents the vehicle from
rolling backward or forward, such as
when releasing the brake pedal while
on a slope.
NOTE
The HLA may not operate on a gentle
slope or depending on the vehicle’s
load.
The HLA does not operate if the
parking brake is applied or the
vehicle has not stopped completely.
When the TCS/DSC operation
indicator light
turns on, the HLA
may not operate.
The HLA does not turn off even if the
TCS is turned off.
Warning and Cautions for
Using the Hill Launch Assist (HLA)
WARNING
Do not rely completely on the HLA.
The HLA is designed only to assist the
driver in accelerating from a stop on a
slope. The HLA only operates for about
2 seconds and therefore, if the
accelerator and brake pedals are not
operated correctly the vehicle may
move (roll) unexpectedly and cause an
accident. Always confirm the safety
around the vehicle before starting to
drive the vehicle. Note that the vehicle
may move suddenly depending on the
vehicle’s load or if it is towing
something.
Driving
Hill Launch Assist (HLA)
5-66
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Light Switch
Each light turns on/off when the switch
is operated.
With Auto Light
Without Auto Light
Warnings and Cautions
for Using the Light Switch
CAUTION
Do not cover the light sensor by
applying stickers or labels to the
windshield. Otherwise the sensor
cannot detect the surrounding light
correctly.
Driving
Light Switch
5-67
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04