2024 MAZDA CX90 door lock

Always close the door and windows
when refueling. If a fire occurs with
the doors or windows open, the
flames may spread into cabin.
 Do not spill fuel on the vehicle while
refueling. It may cause discoloration,
stains, or paint damage.
 Do not use any non-genuine
fuel-filler cap. Use of a non-genuine
fuel-filler cap may lead to a
malfunction in the fuel system or
emission system.
(U.S.A. and Canada)
It may also cause the check engine
light in the instrument cluster to
illuminate.
 When using an automatic car wash
or a high water pressure car wash,
make sure that the fuel lid is closed
and lock the doors. Otherwise, the
fuel lid may open unexpectedly and
become damaged.
 (U.S.A. and Canada)
If the check fuel cap warning light
illuminates, the fuel-filler cap may
not be properly installed. If the
warning light illuminates, park your
vehicle safely off the right-of-way,
remove the fuel-filler cap and
reinstall it correctly. After the cap has
been correctly installed, the fuel cap
warning light may continue to
illuminate until a number of driving
cycles have been completed. A drive
cycle consists of starting the engine
(after four or more hours with the
engine off) and driving the vehicle on
city and highway roads. Continuing
to drive with the check fuel cap
warning light illuminated could cause
the check engine light to illuminate
as well.Refueling
1. Close all the doors, windows, and
the liftgate.
2. Switch the vehicle power OFF.
3. Press the fuel-filler lid opener switch.
“Preparing for Refuelling” is
displayed in the instrument cluster.
4. Make sure that the indication in the instrument cluster changes to
“Ready to Refuel”.
5. Unlock the driver's door.
6. Press the fuel-filler lid.
The fuel-filler lid opens.
Driving
Refueling
5-105
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

7. Slowly turn the fuel-filler cap.The fuel-filler cap opens.
8. Place the fuel-filler cap on the
fuel-filler flap holder.
9. Insert the refueling nozzle all the way and begin refueling.
10.Turn the fuel-filler cap until a click sound is heard.
11.Close the fuel-filler lid. The lid is locked automatically.
NOTE
Finish refueling within 20 minutes
after pressing the fuel-filler lid
opener switch.
If “Ready to Refuel” is not displayed,
there is a possibility that the system
has a problem.
If the fuel-filler lid is closed after
locking the doors, the fuel-filler lid
will not be locked.
If the doors are locked by any of the
following functions, the fuel-filler
flap is also locked at the same time.
Vehicle speed sensing auto door
lock function
Auto re-lock function
Driving
Refueling
5-106
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Charging Related Part Overview
Charge cable
The charge cable is connected to the electrical outlet and the vehicle to send
electrical power to the vehicle. For details regarding the charge cable, refer to the
instruction manual accompanying the charge cable.
1. Charge connector
2. Control box
3. Charge plug
charge connector
The charge connector is the part used for connecting to the charging port on the
vehicle side.
When the charge connector is connected to the charging port, a vehicle system locks
the charge connector.
When the charge connector is locked by the vehicle system, it unlocks when the
driver’s door is unlocked.
If the charge connector locked by the vehicle system is not unlocked even though
the driver’s door is unlocked, consult an Authorized Mazda Dealer.
NOTE
The conditions for locking the vehicle system can be changed.
Refer to Convenient Ways to Use of Charging on page 5-118.
Control box
The control box indicates the charge status by turning on/flashing the indicator light.
For the indicator light illumination/flash pattern, refer to the instruction manual
accompanying the charge cable.
charge plug
The charge plug is the part for connecting to the electrical outlet.

In general, keep the charge cable at home. If the charge cable is kept in the vehicle,
firmly secure it using the following procedure.
1. Store the charge cable in its special storage bag.
Driving
Charging
5-113
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Charging indicator
The charging indicator indicates the charging status by turning
on/flashing the light.
For the charging indicator illumination/flash pattern, refer to [Charging].
Charging port lid
The charging port lid is locked/unlocke d in conjunction with the door locking/
unlocking mechanism.
When unlocking the driver’s door, the charging port lid is unlocked. When locking
the driver’s door, the charging port lid is locked.
However, if the driver’s door is unlocked using the auxiliary key, the charging port lid
is not unlocked.
NOTE
When the driver's door is locked using an y of the following functions, the charging
port lid is also locked at the same time.
Vehicle speed sensing auto door lock functionAuto re-lock function
Charge port
The charge port is the part used for connecting to the charge connector of the
charge cable. It is used for charging.
Driving
Charging
5-115
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Perform Charging
It can be charged with a maximum of
7.2 kW of power.
When charging is started after the high
voltage battery warning indication/
warning light turns on, the time until
fully charged is as follows.
(7.2 kW normal charging)
About 2.5 hours
For charging, the charging timer
function can be used to charge
automatically from start to finish. For
details on use, refer to [Charging
Settings].
NOTE
Installation of charging equipment is
required for 7.2 kW normal charging.
Consult an Authorized Mazda Dealer
for details.
If a power outage occurs while
charging, remove the charge plug
and the charge connector and start
charging from the beginning again.
Make sure that no water has
accumulated in the charge connector
and the charging port before
charging. If any foreign matter enters
the charge connector or the charging
port, do not start charging and
consult an Authorized Mazda Dealer.
1. Switch the vehicle power OFF.
2.
3. Open the charging port cap.
4. Connect the charge plug to the outlet.
5. Connect the charge connector to the charging port.
Charging starts after connection is
completed.
NOTE
When the charging timer is set,
charging does not start even if the
charge connector is connected.
When you prefer to start charging
immediately, use the charging timer
cancellation function.
Make sure to lock all the doors
before leaving the vehicle while
charging.
6. When charging is finished, unlock the door to unlock the charge
connector.
7. Remove the charge connector.
8. Close the charging port cap.
9. Close the charging port lid.
10.Disconnect the charge plug.
Driving
Charging
5-116
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NOTE
When charging is started, the charging
status screen is displayed. The charging
status screen turns off after a certain
period of time passes or the doors or
liftgate is locked. The screen is
displayed again when the doors or
liftgate is unlocked.Convenient Ways to Useof Charging
Charging Schedule
Timer charging is a function which
charges the battery automatically ac-
cording to a preset time.
You can charge the battery using this
function during time periods when
electricity rates are low. In addition,
the maximum charge limit can be set
and changed.
1. Select Settings from the homescreen on Mazda Connect.
2. Select EV Settings from the setting
screen.
3. Select Charging Schedule from the selection screen.
Function Available setting changes
1 ----
Enable, Disa-ble
*1Edit, Delete*2
2 ----
3 ----
4 ----
5 ----
6 ----
7 ----
*1 If a list selected using the cursor has beenset, the item can be Enable or Disable.
*2 Settings can be Edit/Delete by sliding a listselected using the cursor to the right.
NOTE
The charging timer does not work
immediately after the lead-acid
battery is removed or installed, or
when no GPS signal has been
received. When charging without
receiving GPS, charging begins.
When GPS signals are received, the
charging timer becomes operational.
Driving
Charging
5-118
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Strong light is directed at the front of
your vehicle (such as backlight and
high-beam headlights).
The surrounding area is dark (such as
during the night, early evening, or
early morning, or in a tunnel or
indoor parking lot).
There are light sources in the
surrounding area (such as street
lamps, illuminated signboards, andtraffic signals).
There are objects which reflect light
(such as reflective plates and signs)
in the surrounding area.
The surrounding brightness suddenly
changes (such as when entering or
exiting a tunnel).
The brightness of the headlights of
your vehicle is insufficient (such as
the illumination is weakened due to
a dirty lens or the optical axis is
deviated).
Tires other than the specified size are
used on your vehicle (such as when
tire chains or temporary spare tires
are used).
The tires on your vehicle havesignificantly different wear.
Foreign matter is stuck to the
windshield (such as ice, fog, snow,
frost, raindrops, dirt, or a piece of
plastic).
The windshield is dirty or fogged.The Forward Sensing Camera (FSC) is
blocked by an obstruction, causing
poor forward visibility (such as when
roof rails are installed to the vehicle
and a long object is loaded).
The windshield washer is being used.The windshield wipers are not used
when it is raining.
Your vehicle is tilted (such as when
heavy luggage is in the luggage
compartment or on the rear seat).
The vehicle is making a sharp curve,
or ascending or descending a steep
slope.
The vehicle is driven on a road with
sharp curves or up and down (wavy)
slopes.
The vehicle is driven on uneven
roads.
The vehicle is driven next to walls
with no patterning (including fences
and longitudinally striped walls).
There is a strong reflection of light
from the road surface.
Driving
Forward Sensing Camera (FSC)
5-130
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

the instrument cluster screen display (white)
is not displayed.

In addition, when the door in the
direction in which an approaching
vehicle is detected is opened, the
driver is notified of the danger by
flashing of the warning lights, the
warning sound, and the instrument
cluster warning indication (amber).
BSM warning light
Instrument cluster
NOTE
The Vehicle Exit Warning may not
operate normally if any of the
following conditions is met.
The rear side radar sensors cannot
detect an object.
Refer to Radar Sensors on page
5-131.
There is a parked vehicle near your
vehicle.
Moving objects are slow.The Vehicle Exit Warning is not
automatically turned off even if a
Mazda genuine trailer hitch is used.
If a trailer is towed or a bicycle
carrier is attached to the rear of the
vehicle, the radar signal may be
blocked and the Vehicle Exit Warning
may not operate correctly.
The Vehicle Exit Warning may
operate with stationary objects on
the road or the roadside (such as
guardrails, sidewalls, and parked
vehicles).
The brightness of the BSM warning
lights is linked to the panel light
control.
Refer to Dashboard Illumination on
page 5-35.
Tu r n i n g off the BSM and the Vehicle
Exit Warning
There are 2 ways to turn off the BSM
and the Vehicle Exit Warning.
Tu r n
off the BSM and the Vehicle Exit
Warning using Mazda Connect.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Tu r n off the BSM and the Vehicle Exit
Warning using the i-ACTIVSENSE
OFF switch.
Refer to How to Use the
i-ACTIVSENSE OFF switch on page
5-126.
Driving
Blind Spot Monitoring (BSM)
5-149
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04