2024 MAZDA CX90 climate control

During the cabin preconditioning
operation, the cooling fan, the
compressor, and the cabin fans
operate, but this does not indicate a
problem.
 The climate control system functions
you can use
differ depending on the
vehicle power position.
Function Vehicle power position
OFF ACC ON
(Hy- brid sys-
tem off) ON
(Hy- brid sys-
tem on)
Air circulation — — X X
Cooling/heating — — X
*1X
Climate Control
Timer X———
Remote climate
control X———
X: Available
—: Not available
*1 The cooling/heating function can
be used only while charging.
NOTE
The recommended set temperature
is 22 °C (72 °F). If you set an
extremely high or low temperature,
power consumption will increase
and the charging time will take
longer.
If you operate the cabin
preconditioning while the charge
connector is connected, you can
reduce the electric power
consumption of the high voltage
battery.
While the cabin preconditioning is
operating , the indicator light for the
climate control power switch turns
on.
The cabin preconditioning operates
for 20 minutes. If you set the
departure time using the climate
control timer, set it 20 minutes or
later from the current time and if you
want to make several settings, space
them out at intervals of 30 minutes
or longer.
How to set the Climate Control Timer
1. Select “Settings” from the Mazda Connect home screen.
2. Select “EV Settings”.
3. Select “Climate Control Timer”.
4. Select the item setting you would like to change from the displayed
content.
5. Switch the vehicle power OFF.
Climate Control Timer
Allows climate control to adjust cabin
temperature before driving.
Function Available setting changes
1 ---
Enable,
Disable
*1Edit,
Delete*2
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
*1 If an item selected using the cursor has been set, the item can be
enabled or disabled.
*2 Settings can be “Edit”/“Delete” bysliding an item selected using the
cursor to the right.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-13
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Edit
The Climate Control Timer settings can
be edited.
FunctionAvailable setting
changes
Departure Time Time
(10-minute inter- vals)
Repeat
*1Monday ― Sun-
day
Te m p e ra t u r e 15.5
℃ (61 ℉) ―
28.5℃ (83 ℉)
Front Defroster Enable,
Disable
Rear Defroster Enable,
Disable
*1 If no [Repeat] day is set, the climate control timer operates only
1 time at the set hours.
NOTE
Enabling “Front Defroster” /“Rear
Defroster” will aid you in defrosting
and removing ice or snow from the
window glass. The recommended set
temperature when setting the
defroster is 22 °C (72 °F) or higher.
The defroster performance changes
according to the set temperature.
The climate control timer does not
work if the vehicle is left unattended
for a long period of time in an
environment where GPS signal
reception is difficult, such as in an
underground parking lot or indoors,
or if GPS signals are not received.
When GPS signals are received, the
climate control timer becomes
operational.
The climate control timer does not
operate while the remote climate
control is operating.
The climate control timer can be
stopped by a Smartphone remote
control operation using the
Connected Service.
For details, consult an Authorized
Mazda Dealer.
How to Set the Remote Climate
Control
To use the remote climate control, it is
necessary to subscribe to Connected
Service.
For details, consult an Authorized
Mazda Dealer.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-14
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Air Vents
The location and the direction airflow
exits the air vents changes depending
on the air vent adjustment.
How to Use the Air Vents
Air vent open/closet
Move the dial fully in the fully open or
fully closed direction.
1. Open
2. Close

Airflow direction adjustment

Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-15
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04

Airflow selection
Dashboard Vents
Dashboard and Floor Vents
Floor Vents
Fully Automatic ClimateControl System
The following functions are
automatically controlled according to
the set temperature.
Airflow temperature controlAirflow amount controlAirflow mode switching
NOTE
To p r e v e n t c o l d airflow immediately
after heating starts when the hybrid
system is cold, the airflow amount is
decreased.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-16
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Fully Automatic Climate Control System Overview
(Front)
1. AUTO switch
2. Driver's side temperature setting switch
3. Temperature setting display
4. Airflow display
5. Mode selector display
6. SYNC (synchronized temperature) switch
7. Rear control switch
8. Rear climate control system power switch (system on/off)
9. Mode selector switch
10.Fan control switch
11.Climate control system power switch
(Rear)
1. Airflow display
2. Mode selector display
3. AUTO display
4. SYNC (synchronized temperature) display
5. Temperature setting display
6. Temperature setting switch
7. AUTO switch
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-17
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

8. Mode selector switch
9. Fan control switch
10.Climate control system power switch
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-18
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

How to Use the FullyAutomatic Climate Control System
(Operation from front seats)
1. Start the hybrid system.
2. Turn the front climate control system on.
3.
The indicator light turns on.
NOTE
When the rear climate control
system is turned on using the Rear
climate control system power
switch, each setting is the setting
before the rear climate control
system was turned off.
4.
The indicator light turns on and the
screen changes to the rear climate
control system operation screen.
5. Press the temperature setting switch to set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
The following switches cannot be
operated while the rear climate
control system operation screen is
displayed.
Air intake selector switchFront passenger’s side
temperature setting switch
A/C switchIf none of the following switches
are operated, the screen returns
to the front climate control
system operation screen after 10
seconds.
AUTO switchDriver’s side temperature
setting switch
SYNC (synchronized
temperature) switch
Mode selector switchFan control switch
6. To stop the operation, press the climate control system power
switch.

Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-19
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

(Operation from rear seats)
1. Start the hybrid system.
2.
3.
4. Press the temperature setting switchto set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
The recommended set
temperature is 22 ℃(72 °F).
If mode selector switch or fan
control switch is operated during
auto operation, the AUTO switch
indicator light turns off.
If the AUTO switch is pressed
while the front A/C switch is off,
the rear air conditioner operates
only to circulate air.
5. To stop the operation, press the climate control system power
switch.
Operating Each Switch
AUTO switch
Automatically controlled according to
the set temperature.
Temperature setting switch
How to increase the set temperature
How to decrease the set temperature
NOTE
The set temperature changes in
increments of 0.5 ℃ within a range
of 15 ℃ (60 °F) and 29 ℃ (84 °F).
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-20
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04