2024 MAZDA CX90 battery

How to Use the
e-SKYACTIV PHEV
Switching the Drive Mode
You can switch the drive mode of the
hybrid system by operating the switch.
TOWING mode/SPORT mode/
NORMAL mode/EV mode/
OFF-ROAD mode
Refer to How to Use the Mazda
intelligent Drive Select (Mi-Drive) on
page 5-96.
CHARGE Mode
The engine is used as a generator, and
the vehicle is driven while charging the
high voltage battery.
1. Start the hybrid system.
2.
When CHARGE mode is activated, the
CHARGE mode indicator light
in
the instrument cluster turns on.
Power is generated to the preset target
charge amount, and when the target
charge amount is reached, power is
generated to maintain it.
NOTE
Switching to CHARGE mode may not
be possible depending on the
conditions of the hybrid system.
When power consumption is high
due to the vehicle driving conditions,
outside air temperature, or when the
air conditioner is used, charging may
take longer than usual or may not
occur.
When the vehicle is driven while in
CHARGE mode, the engine operates
to generate electricity, therefore fuel
consumption may increase
compared to when driving the
vehicle in a mode other than
CHARGE mode.
If the vehicle power is switched OFF
while switching the mode to
CHARGE mode, the CHARGE mode
will be canceled the next time the
vehicle power is switched ON.
When pressing the charge mode
switch while the Mazda intelligent
Drive Select (Mi-Drive) is in EV
mode, the Mi-Drive switches to
NORMAL mode and the vehicle is
driven in CHARGE mode.
The mode may not be able to switch
to CHARGE mode when the fuel is
low.
The target charge amount can be
changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Po we r Me te r
Displays in the instrument cluster while
driving in NORMAL mode or EV mode.
Driving
e-SKYACTIV PHEV
5-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NORMAL mode
1. POWER gauge
2. CHARGE gauge
3. EV drive indicator light
4. Boost indicator light
5. CHARGE mode indicator light
EV mode
1. POWER gauge
2. CHARGE gauge
3. Boost indicator light
POWER gauge
Displays the energy used by the motor
or engine for driving. The higher the
output, the more the power meter
needle moves to the right. The more
the power meter needle moves to the
right, the easier it is to start the engine.
CHARGE gauge
Displays the energy charged in the high
voltage battery by regenerative braking.
The higher the charge, the more the
power meter needle moves
downward.
Boost indicator light
The light turns on when the energy
used for driving is at maximum output.
EV drive indicator light
The light turns on when the vehicle is
being driven using only the motor.
CHARGE mode indicator light
The light turns on when the vehicle is
being driven in CHARGE mode.
Approaching Vehicle Audible System
When the vehicle is driven at low
speeds, a warning sound is
automatically activated to warn that a
vehicle is approaching.
1. Start the hybrid system.
2. Shift the selector lever to a position other than P.
A warning sound is activated and stops
when the vehicle speed reaches 41
km/h (26 mph) or faster.
Driving
e-SKYACTIV PHEV
5-24
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe e-SKYACTIV PHEV
Switch to Start in EV Mode
The hybrid system can be changed to
start in EV mode.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Switching the Regenerative Braking
Strength
The regenerative braking strength can
be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
For Eco-Friendly and Economical
Driving
Using the Drive Mode
EV mode is mainly used in urban areas,
while NORMAL mode is used in
suburban areas and on expressways,
which leads to savings in electricity and
fuel consumption.
By actively using regenerative braking
to charge the high voltage battery, it is
possible to increase the EV travel
distance and to reduce fuel
consumption when driving the vehicle
in a mode other than EV mode.
To extend cruising distance
The electrical power consumption
while driving can be reduced and the
cruising distance can be extended by
doing the following operations.
With the charge connector
connected, turn on the climate
control system to provide a
comfortable temperature in the
cabin before driving.
When driving during cold
temperatures, use the seat warmer or
steering warmer instead of the
climate control system.
Adjust the climate control system to
a moderate airflow and temperature
setting.
Refrain from using the defogger
under conditions other than when a
window is fogged or frozen.
By maintaining a sufficient distance
between vehicles and using the
regenerative braking well, more
electrical power can be charged to
the high voltage battery.
To extend the life of the high voltage
battery
The high voltage battery life changes
depending on the vehicle storage
conditions or charging method.
To extend the life of the high voltage
battery, be careful of the following.
(Charging the battery)
Avoid unnecessary, frequent
charging.
Only charge the battery with as much
power as needed, and do not always
fully charge the battery. The
maximum charge limit can be set.
Refer to Convenient Ways to Use of
Charging on page 5-118.
(Parking the vehicle)
Do not park the vehicle in a place
where the ambient temperature is
extremely high or low.
Do not leave the vehicle while the
remaining high voltage battery power
is extremely low.
If the [Battery Cooling] operation notification is displayed on the
center display after driving the
vehicle, select [Activate].
Driving
e-SKYACTIV PHEV
5-25
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Remaining Charge and Temperature
of the High Voltage Battery
If the high voltage battery level is low
or the high voltage battery temperature
is low, the vehicle speed may not
increase even if the accelerator pedal is
depressed because the motor output is
restricted. Check the contents
displayed in the instrument cluster and
the remaining amount of power in the
high voltage battery before driving.
(Battery cooling)
If the high voltage battery temperature
is high after driving the vehicle, it is
possible to cool the high voltage
battery while the vehicle is parked to
extend the life of the high voltage
battery. If the Excessive Battery
Te m p e ra t u r e notification is displayed
on the center display after driving the
vehicle, select Start to start the battery
cooling.
NOTE
Because the electrical power of the
high voltage battery is used by the
battery cooling , we recommend that
the charge connector is connected
while the battery cooling is operating.
Driving
e-SKYACTIV PHEV
5-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Instrument Cluster
The screen display informs you of the vehicle information.
ƒDisplays the power meter and the tachometer.
The display
differs depending on the drive mode.
„ Displays the speedometer and vehicle information using messages.
Changes depending on the drive mo de and the system being used.
… Displays the high voltage battery power gauge and the fuel gauge.
The display is changed using the INFO switch.
† Displays the ambient temperature/odo meter/trip meter, maximum driving
distance, and vehicle information using messages.
Driving
Instrument Cluster
5-27
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Average fuel economy display
Instantaneous electrical power consumption rate display
Instantaneous fuel economy display
3. High voltage battery temperature gauge Engine coolant temperature gauge
4. i-ACTIVSENSE status symbol (Warning/Risk avoidance support system)
5. Compass display
6. Message display
*1
*1 Displayed only when a warning occurs.
The screen will switch automatically when some i-ACTIVSENSE systems are used.
Driving
Instrument Cluster
5-30
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the
Odometer/Trip Meter

The display changes each time the TRIP
switch is pressed.
1. Odometer display
2. Trip meter A display
3. Trip meter B display

When returning the trip meter to “0”,
press the TRIP switch for 2 seconds or
longer while the trip meter is
displayed.
NOTE
If the lead-acid battery is disconnected
for vehicle maintenance or other
reasons, the trip meter display returns
to “0”.
High Voltage Battery Temperature Gauge
Displays the high voltage battery
temperature. The blue range of the
gauge indicates that the high voltage
battery temperature is low and the red
range indicates that it is high and
overheating.

Driving
Instrument Cluster
5-33
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Engine Coolant
Temperature Gauge
Displays the engine coolant
temperature. The blue range of the
gauge indicates that the engine coolant
temperature is low, and the red range
of the gauge indicates that the engine
coolant temperature is high and
overheating.

CAUTION
If the engine coolant temperature
gauge needle is in the red range, there
is the possibility of overheating. Drive
slowly to reduce engine load.
Refer to Taking Action with
Overheating on page 8-20.
High Voltage Battery Powe r G au ge
The remaining power of the high
voltage battery is indicated when the
vehicle power is switched ON.
When the high voltage battery is fully
charged, F is indicated. As the level
lowers, the needle approaches E.

NOTE
After charging, it may require some
time for the needle to stabilize.
The arrow indicates that the
charging port is on the right side.
Driving
Instrument Cluster
5-34
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04