2024 MAZDA CX90 off

Door-ajar Warning Light/Liftgate-open Warning Light/Hood-open
Warning Light
The light turns on if any door/liftgate/
hood is not closed securely.
Close the door/liftgate/hood securely.
KEY Indicator Light(Green) (Flashing)
The light flashes if the battery power of
the key is low when the vehicle power
is switched from ON to OFF.
Replace the key battery.
What to Do in Case of Emergency
Warning/Indicator Light Turns On
8-54
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Lights-On Reminder
If the vehicle power is switched OFF
with the exterior lights turned on and
the driver’s door is opened, a sound is
activated.
Operate the headlight switch to turn
off the exterior lights.
NOTE
A personalized function is available to
change the sound volume for the
lights-on reminder.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Ve h i c l e Po we r N o t
Switched OFF Reminder Warning Sound
If the driver's door is opened with the
vehicle power switched to ACC, a
beep will be heard continuously in the
cabin to notify the driver that the
vehicle power has not been switched
OFF (STOP). Under this condition, the
keyless entry system will not operate,
the vehicle cannot be locked, and the
lead-acid battery voltage will be
depleted.
Switch the vehicle power OFF.
What to Do in Case of Emergency
Warning Sound is Activated
8-56
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Key Removed from
Vehicle Warning Sound
Vehicles with advanced keyless
function
If the key is taken out of the vehicle
while the vehicle power is switched to
ACC or ON, and all the doors are
closed, a sound is activated 6 times
outside of the vehicle and a sound is
activated 1 time in the vehicle.
Vehicles without advanced keyless
function
If the key is taken out of the vehicle
while the vehicle power is switched to
ACC or ON, and all the doors are
closed, a sound is activated 1 time in
the vehicle.

Make sure that you leave the vehicle
while carrying the key, or switch the
vehicle power OFF.
Key Left-in-Vehicle Warning Sound
If all the doors and luggage
compartment are locked using another
key while the key is left in the cabin,
the beep which soun ds outside of the
vehicle will be heard for about 10
seconds to notify the driver that the
key is in the cabin. In this case, take
out the key by opening the door.
A key taken out of the vehicle using
this method may not operate because
its functions have been temporarily
stopped. To restore the key's functions,
perform the applicable procedure
(page 8-8).
What to Do in Case of Emergency
Warning Sound is Activated
8-57
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Key Left-In-Luggage
Compartment Warning Sound (Vehicles With
Advanced Keyless Function)
If the key is left in the luggage
compartment with all the doors locked
and the liftgate closed, a beep will be
heard outside for about 10 seconds to
notify the driver that the key is in the
luggage compartment. In this case,
take out the key by pressing the electric
liftgate opener and opening the
liftgate.
The key taken out of the luggage
compartment may not operate
because its functions have been
temporarily stopped. To restore the
key's functions, perform the applicable
procedure (page 8-8).
Door Lock InoperableWarning Sound
Operation Using Touch Sensor
A warning beep is activated to notify
the driver that the doors are not locked
when all of the following conditions
are met:
The vehicle power is switched OFF.All the doors are not fully closed.The lock is operated 3 times within 5
seconds.
Check the vehicle power and whether
the doors are open or closed, and then
operate the lock again.
Operation Using Door-lock Switch on
the Liftgate
When the door-lock switch on the
liftgate is pressed under any of the
following conditions, a warning sound
is activated.
The vehicle power is switched to a
position other than OFF.
Any door is open.
Make sure that none of the above
conditions are present, and then press
the door-lock switch again.
What to Do in Case of Emergency
Warning Sound is Activated
8-58
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Selector Lever Not in P
Reminder Warning Sound
A warning sound is activated if the
following operations are performed
while the selector lever is in a position
other than P.
The vehicle power is switched OFF
while the hybrid system is operating.
The driver’s seat belt is unfastened
and the driver’s door is opened.
Check the selector lever position.
Reverse Position Warning Sound
The warning sound is activated when
the vehicle power is switched ON and
the selector lever is in the R position.
If the selector lever is shifted to a
position other than R, the warning
sound stops.
What to Do in Case of Emergency
Warning Sound is Activated
8-62
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Warnings and Cautionsfor Daily Inspection
WARNING
Do not perform maintenance work if
you lack sufficient knowledge and
experience or the proper tools and
equipment to do the work. Have
maintenance work done by a
qualified technician.
Performing maintenance work on a
vehicle is dangerous if not done
properly. You can be seriously injured
while performing some maintenance
procedures.
If you must run the hybrid system
while working under the hood, make
certain that you remove all jewelry
(especially rings, bracelets, watches,
and necklaces) and all neckties,
scarves, and similar loose clothing
before getting near the cooling fan
which may turn on unexpectedly.
Working under the hood with the
hybrid system operating is dangerous.
It becomes even more dangerous
when you wear jewelry, loose clothing
or have long hair or a long beard.
Either can become entangled in
moving parts and result in injury.
Pull over to a safe location, then
switch the vehicle power off and
make sure the fan is not running
before attempting to work near the
cooling fan.
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not leave items in the motor
compartment.
After you have finished checking or
doing servicing in the engine
compartment, do not forget and leave
items such as tools or rags in the motor
compartment. Tools or other items left
in the engine compartment could
cause the hybrid system damage or a
fire leading to an unexpected accident.
CAUTION
When using a chassis roller, turn the
following systems off to prevent them
from mis-operating while the vehicle is
running on the chassis roller.
 Mazda Radar Cruise Control
(MRCC)
 Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)
 Cruising & Traffic Support (CTS)
 Smart Brake Support (SBS)
Inspection and Servicing/Cleaning
Daily Inspection
9-8
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Inspecting Engine Oil
CAUTION
Do not overfill the engine oil. This may
cause engine damage.

Use center display screen indication to
inspect the engine oil level.
1. Make sure the hood is closed.
2. Start the hybrid system.
3. Select “Information” on the Home screen to display the vehicle status
monitor.
4. Select “Vehicle Status Monitor”.
5. Select “Engine Oil Level”.
6. Select “Start”. The engine starts and measurement
of the engine oil level begins. Do
not depress the accelerator pedal
during the measurement.
NOTE
If measurement conditions not
shown on the display are not met
such as when warm-up operation
has not been completed due to low
outdoor temperatures, the
measurement error screen may be
displayed. In this case, drive the
vehicle using the engine for a
certain period of time to complete
the warm-up operation and repeat
the procedure.

7. Switch the vehicle power OFF.
NOTE
After the measurement is
completed, the engine does not
stop automatically.

Recommended Oil
Use SAE 0W-20 engine oil.
Mazda Genuine Oil is used in your
Mazda vehicle. Mazda Genuine
0W-20 Oil is required to achieve
optimum fuel economy.
For maintenance service, Mazda
recommends Genuine Mazda Parts
and Genuine Mazda Premium Oil.

Only use SAE 0W-20 oil “Certified For
Gasoline Engines” by the American
Petroleum Institute (API).
Oil with this trademark symbol
conforms to the current engine and
emission system protection standards
and fuel economy requirements of the
International Lubricant Standardization
and Approval Committee (ILSAC),
Inspection and Servicing/Cleaning
Engine Compartment Inspection
9-13
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

comprised of U.S. and Japanese
automobile manufacturers.
Inspecting the Coolant
WARNING
Do not use a match or live flame in
the engine compartment. DO NOT
ADD COOLANT WHEN THE ENGINE
IS HOT.
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect the engine coolant in the
coolant reservoir, but do not open it.
Pull over to a safe location, then
switch the vehicle power off and
make sure the fan is not running
before attempting to work near the
cooling fan.
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not remove either
cooling system cap when the engine
and radiator are hot.
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury.
NOTE
Changing the coolant should be done
by an Authorized Mazda Dealer.
Inspection and Servicing/Cleaning
Engine Compartment Inspection
9-14
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04