2024 MAZDA CX90 air condition

A system malfunction or operation
conditions are indicated by a warning.
Refer to Air Bag/Seat Belt Pretensioner
System Warning Light on page 8-47.
In addition, the pretensioner system
for the front passenger, like the front
and side passenger air bag, is designed
to only deploy in accordance with the
total seated weight on the front
passenger seat.
For details, refer to the front passenger
seat weight sensors (page 3-16).
Load limiting system
If the vehicle receives a strong impact
from the front of the vehicle, the load
limiting system operates to prevent the
seat belts from applying an excessive
load. By maintaining the load applied
to the seat belt to a specified level, the
system reduces impact to an
occupant's chest.
Even if the pretensioners have not
fired, the load limiting function must
be checked by an Authorized Mazda
Dealer.
NOTE
The pretensioner system operates if
the vehicle receives a strong impact
from the vehicle front or side
direction. The system may not
operate if the impact is weak.
Some smoke might be released
when the pretensioner system
operates, but this does not mean
there is a fire. This gas normally has
no effect on occupants. However,
those with sensitive skin may
experience light skin irritation. If
residue from the operation of the
pretensioner system gets on the skin
or in the eyes, wash it off as soon as
possible.
Warnings and Cautions
for Using the Seat Belts
WARNING
Always wear your seat belt and make
sure all occupants are properly
restrained.
Not wearing a seat belt is extremely
dangerous. During a collision,
occupants not wearing seat belts could
hit someone or things inside the
vehicle or even be thrown out of the
vehicle. They could be seriously injured
or even killed. In the same collision,
occupants wearing seat belts would be
much safer.

In a rollover crash, an unbelted person
is significantly more likely to die than a
person wearing a seat belt.

Do not wear twisted seat belts.
Twisted seat belts are dangerous. In a
collision, the full width of the belt is
not available to absorb the impact.
This puts more force on the bones
beneath the belt, which could cause
serious injury or death. So, if your seat
belt is twisted, you must straighten the
seat belt to remove any twists and to
allow the full width of the belt to be
used.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-22
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Never use one seat belt on more than
one person at a time.
Using one seat belt for more than one
person at a time is dangerous. A seat
belt used in this way cannot spread the
impact forces properly and the two
passengers could be crushed together
and seriously injured or even killed.
Never use one belt for more than one
person at a time and always operate
the vehicle with each occupant
properly restrained.
Do not operate a vehicle with a
damaged seat belt.
Using a damaged seat belt is
dangerous. An accident could damage
the belt webbing of the seat belt in
use. A damaged seat belt cannot
provide adequate protection in a
collision. Have an Authorized Mazda
Dealer inspect all seat belt systems in
use during an accident before they are
used again.
Have your seat belts changed
immediately if the pretensioner or
load limiter has been expended.
Always have an Authorized Mazda
Dealer immediately inspect the seat
belt pretensioners and air bags after
any collision. Like the air bags, the seat
belt pretensioners and load limiters
will only function once and must be
replaced after any collision that caused
them to deploy. A seat belt with an
expended pretensioner or load limiter
is still better than wearing no seat belt
at all; however, if the seat belt
pretensioners and load limiters are not
replaced, the risk of injury in a collision
will increase.
Positioning the Shoulder Portion of
the Seat Belt.Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder portion
of the seat belt is positioned across
your shoulder and near your neck, but
never under your arm, on your neck, or
on your upper arm.
Positioning the Lap Portion of the Seat
Belt.
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low as
possible.
Pregnant women and persons with a
medical condition should always wear
seat belts.
However, ask your doctor about
precautions in using a seat belt
because a strong impact might be
applied locally during sudden braking
or a collision. The lap portion of the
belt should fit the pelvis as low as
possible avoiding abdominal area. In
addition, the shoulder portion should
be positioned on the shoulder and
fitted to the chest avoiding the
abdominal area.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Warnings and Cautionsfor Using the Seat Belt Extender
WARNING
Do not use a seat belt extender unless
it is necessary.
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly. In
an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.
Do not use an improper extender.
Using a seat belt extender that is for
another person or a different vehicle or
seat is dangerous. The seat belt will not
provide adequate protection and the
user could be seriously injured in an
accident. Only use the extender
provided for you an d for the particular
vehicle and seat. NEVER use the
extender in a different vehicle or seat.
If you sell your Mazda, do not leave
your seat belt extender in the vehicle.
It could be used accidentally by the
new owner of the vehicle. After
removing the seat belt extender,
discard it. Never use the seat belt
extender in any other vehicle you may
own in the future.
Do not use an extender that is too
long.
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured. Do
not use the extender or choose one
shorter in length if the distance
between the extender's buckle and the
center of the user's body is less than
15 cm (6 in).
Do not leave a seat belt extender
connected to the buckle.
Leaving a seat belt extender connected
to the buckle without using the seat
belt is dangerous. When the seat belt
extender is connected to the driver's
seat belt buckle (or front passenger's
seat belt buckle), the SRS driver's (or
front passenger's) air bag system will
determine that the driver (or front
passenger) is wearing the seat belt
even if the driver (or front passenger) is
not wearing it. This condition could
cause the driver's (or front
passenger's) air bag to not activate
correctly and result in death or serious
injury in the event of collision. Always
wear the seat belt with the seat belt
extender.
Do not use the seat belt extender
when installing a child-restraint
system on the front or rear passenger
seat.
Using a seat belt extender to fasten a
child-restraint system on any seat is
dangerous. Always follow the
child-restraint system manufacturer's
installation instructions and never use
a seat belt extender.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-27
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Ve h i c l e s w i t h a f r o nt passenger air bag
have the following warning label. The
warning label reminds you not to put a
rear-facing child-restraint system on
the front passenger seat at any time.
Do not install a front-facing
child-restraint system on the front
passenger seat unless it is
unavoidable.
In a collision, the force of a deploying
air bag could cause serious injury or
death to the child. If installing a
front-facing child-restraint system on
the front passenger seat is
unavoidable, move the front passenger
seat as far back as possible and adjust
the seat bottom (height adjustable seat
bottom) to the highest position at
which the seat belt fastening the
child-restraint system is securely
tightened.
Seating a child in a child-restraint
system on the front passenger seat is
dangerous under certain conditions .
Your vehicle is equipped with front
passenger seat weight sensors. Even
with the front passenger seat weight
sensors, if you must use the front
passenger seat to seat a child, using a
child-restraint system on the front
passenger seat un der the following
conditions increases the danger of the
front passenger air bag deploying and
could result in serious injury or death
to the child.
 The front passenger air bag
deactivation indicator light does not
illuminate when seating a child in the
child-restraint system.
 Luggage or other items are placed on
the seat with the child in the
child-restraint system.
 A rear passenger or luggage pushing
or pulling down on the front
passenger seatback.
 Luggage or other items are placed on
the seatback or hung on the head
restraint.
 The seat is washed.
 Liquids are spilled on the seat.
 The front passenger seat is moved
backward, pushing into luggage or
other items placed behind it.
 The front passenger seatback
contacts the rear seat.
 Luggage or other items are placed
between the front passenger seat
and driver seat.
 An electric device is put on the front
passenger's seat.
 An additional electrical device, such
as a seat warmer is installed to the
surface of the front passenger seat.
 Any accessories, which might
increase the total seated weight on
the front passenger seat, are
attached to the front passenger seat.
Equipment to Protect Occupants/Pedestrians
Child-restraint Systems
3-53
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Be very careful of high temperature areas.
The hybrid system and the engine become hot when they operate. Follow the
instructions on the label attached to the vehicle and always pay attention to high
voltage areas and high temperature areas.
Do not touch the service plug.
A service plug is installed in the high voltage battery. This service plug is used at an
Authorized Mazda Dealer when repairing vehicles in order to cut off the high voltage
of the high voltage battery. Do not touch the service plug. If you handle the service
plug mistakenly, it could lead to an electrical shock causing serious injury or death.
1. Service plug
Maintenance and Repairs
For vehicle maintenance or repairs, consult an Authorized Mazda Dealer.
Technical knowledge and skill are necessary in handling the high voltage battery.
WARNING
To ensure safe and correct handling of the high voltage battery, always heed the
following precautions.
 Do not remove the high voltage battery.
 Do not resell, transfer, or modify the high voltage battery.
 Do not make secondary use of the high voltage batter.
If the drive battery is not handled properly, the following may occur which could
lead to serious injury or death.
 Touching an unattended high voltage battery may cause an electric shock.
 If the high voltage battery is used on a vehicle other than the one it came
equipped on (including modified vehicles), accidents such as electric shock, heat
generation, smoking, combustion, and explosions, or an electrolyte leakage may
occur.
Heed the following instructions to prevent deterioration of the high voltage battery
or damage to the high voltage battery.
Do not leave the vehicle for a long time under extremely high or low temperature
conditions.
Do not leave the vehicle for 14 days or longer while the high voltage battery power
gauge is at Empty (level 0).
Driving
e-SKYACTIV PHEV
5-20
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

If an Accident Occurs
Heed the following cautions to prevent serious injury such as electric shock, or in the
worst case death.
WARNING
Do not continue to drive the vehicle.
To prevent further accidents, stop the vehicle in a safe place, shift the selector lever
to the P position, and then apply the parking brake to stop the hybrid system.
Never touch electrical wiring that may be protruding into or outside of the cabin.
Otherwise, it could result in electrical shock and serious injury.
Never touch any area where electrolyte is visible or electrolyte is leaking from the
area.
If electrolyte from the high voltage battery gets in the eyes or on the skin, it could
cause loss of vision or skin reactions. If electrolyte comes into contact with the eyes,
do not rub them, and after flushing with water for 15 minutes or longer, seek
medical attention immediately. In addition, if electrolyte comes into contact with
the skin, wash the areas with soap and wate r thoroughly. If you feel any abnormality
in your body, seek medical attention immediately.
Never approach objects that are on fire or extremely hot.
Electrolyte in the high voltage battery may cause a fire. If the vehicle catches fire,
extinguish the fire using a fire extinguisher (type ABC, BC, or C). Only extinguish a
fire with water when a large amount of water is available such as from a fire hydrant.
Using a small amount of water may cause the fire to spread.
Do not tow the vehicle with the front wheels or the rear wheels grounded.
Otherwise, the motor generates electricity which may cause a fire depending on the
condition of the damage. When towing the vehicle, tow it with all 4 wheels off the
ground.
Do not start the hybrid system if there is liquid leaking from the vehicle (other than
air conditioner water).
If liquid leakage (other than air conditioner water) is found on the road surface
under the vehicle, the fuel system may be damaged. Starting the hybrid system in
this condition, may cause a fire. Do not start the hybrid system and contact an
Authorized Mazda Dealer.
Scrapping Your Vehicle and Disposing of High Voltage Battery
The high voltage battery is collected to prevent accidents involving it. When
scrapping your vehicle, replacing the high voltage battery, or disposing of the high
voltage battery, consult an Authorized Mazda Dealer. Please cooperate in ensuring
that the vehicle's high voltage battery is collected.
Driving
e-SKYACTIV PHEV
5-21
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the
e-SKYACTIV PHEV
Switching the Drive Mode
You can switch the drive mode of the
hybrid system by operating the switch.
TOWING mode/SPORT mode/
NORMAL mode/EV mode/
OFF-ROAD mode
Refer to How to Use the Mazda
intelligent Drive Select (Mi-Drive) on
page 5-96.
CHARGE Mode
The engine is used as a generator, and
the vehicle is driven while charging the
high voltage battery.
1. Start the hybrid system.
2.
When CHARGE mode is activated, the
CHARGE mode indicator light
in
the instrument cluster turns on.
Power is generated to the preset target
charge amount, and when the target
charge amount is reached, power is
generated to maintain it.
NOTE
Switching to CHARGE mode may not
be possible depending on the
conditions of the hybrid system.
When power consumption is high
due to the vehicle driving conditions,
outside air temperature, or when the
air conditioner is used, charging may
take longer than usual or may not
occur.
When the vehicle is driven while in
CHARGE mode, the engine operates
to generate electricity, therefore fuel
consumption may increase
compared to when driving the
vehicle in a mode other than
CHARGE mode.
If the vehicle power is switched OFF
while switching the mode to
CHARGE mode, the CHARGE mode
will be canceled the next time the
vehicle power is switched ON.
When pressing the charge mode
switch while the Mazda intelligent
Drive Select (Mi-Drive) is in EV
mode, the Mi-Drive switches to
NORMAL mode and the vehicle is
driven in CHARGE mode.
The mode may not be able to switch
to CHARGE mode when the fuel is
low.
The target charge amount can be
changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Po we r Me te r
Displays in the instrument cluster while
driving in NORMAL mode or EV mode.
Driving
e-SKYACTIV PHEV
5-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe e-SKYACTIV PHEV
Switch to Start in EV Mode
The hybrid system can be changed to
start in EV mode.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Switching the Regenerative Braking
Strength
The regenerative braking strength can
be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
For Eco-Friendly and Economical
Driving
Using the Drive Mode
EV mode is mainly used in urban areas,
while NORMAL mode is used in
suburban areas and on expressways,
which leads to savings in electricity and
fuel consumption.
By actively using regenerative braking
to charge the high voltage battery, it is
possible to increase the EV travel
distance and to reduce fuel
consumption when driving the vehicle
in a mode other than EV mode.
To extend cruising distance
The electrical power consumption
while driving can be reduced and the
cruising distance can be extended by
doing the following operations.
With the charge connector
connected, turn on the climate
control system to provide a
comfortable temperature in the
cabin before driving.
When driving during cold
temperatures, use the seat warmer or
steering warmer instead of the
climate control system.
Adjust the climate control system to
a moderate airflow and temperature
setting.
Refrain from using the defogger
under conditions other than when a
window is fogged or frozen.
By maintaining a sufficient distance
between vehicles and using the
regenerative braking well, more
electrical power can be charged to
the high voltage battery.
To extend the life of the high voltage
battery
The high voltage battery life changes
depending on the vehicle storage
conditions or charging method.
To extend the life of the high voltage
battery, be careful of the following.
(Charging the battery)
Avoid unnecessary, frequent
charging.
Only charge the battery with as much
power as needed, and do not always
fully charge the battery. The
maximum charge limit can be set.
Refer to Convenient Ways to Use of
Charging on page 5-118.
(Parking the vehicle)
Do not park the vehicle in a place
where the ambient temperature is
extremely high or low.
Do not leave the vehicle while the
remaining high voltage battery power
is extremely low.
If the [Battery Cooling] operation notification is displayed on the
center display after driving the
vehicle, select [Activate].
Driving
e-SKYACTIV PHEV
5-25
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04