Page 309 of 516

3076-2. Maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
Clutch pedal
⚫Does the clutch pedal move smoothly?
⚫Does the clutch pedal have appropriate clearance
from the floor?
⚫Does the clutch pedal have the correct amount of free
play? (➞P. 427)
Head restraints⚫Do the head restraints move smoothly and lock
securely?
Horn⚫Function properly?
Indicators/buzzers⚫Do the indicators and bu zzers function properly?
Lights⚫Do all the lights come on?
Parking brake
⚫Does the parking brake operate normally?
⚫When parked on a slope and the parking brake is on, is
the vehicle securely stopped?
Seat belts⚫Do the seat belts operate smoothly?
⚫The seat belts should not be damaged.
Seats⚫Do the seat controls operate properly?
Steering wheel
⚫Does the steering wheel rotate smoothly?
⚫Does the steering wheel have the correct amount of
free play?
⚫There should not be any st range sounds coming from
the steering wheel.
ItemsCheck points
RAIZE_OM_General_BZ358E.book 307 ページ 2022年5月17日 火曜日 午後1時59分
Page 352 of 516

3506-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
eCheck if the fuse is blown.
aNormal fuse
b Blown fuse
Replace the blown fuse with a new fuse of an appropriate amperage rating. The
amperage rating can be found on the fuse box lid.
▶Type A▶Type B
f To install, reverse the removal procedure
⬛After a fuse is replaced
⚫If the lights do not turn on even afte r the fuse has been replaced, replace the
bulb. ( ➞P. 352)
⚫If the replaced fuse blows again, or if the electrical system does not work,
have the vehicle inspected by your Toyota dealer.
⬛If there is an overload in a circuit
The fuses are designed to blow, protec ting the wiring harness from damage.
⬛When replacing light bulbs
We recommend that you use genuine Toyota products designated for this
vehicle. Because certain bulbs are connect ed to circuits designed to prevent
overload, products other than the Toyo ta genuine parts designated for this
vehicle may be unusable.
KBTE731003KBTE731004
RAIZE_OM_General_BZ358E.book 350 ページ 2022年5月17日 火曜日 午後1時59分
Page 354 of 516
3526-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E✽
: If equipped
Replacing light bulbs
You can replace the bulbs listed below yourself. The difficulty of
replacing bulbs depends on the bulb. We recommend that you
replace the parts at your Toyota dealer because they may get dam-
aged.
Preparing light bulbs
Check the W (wattage) of the defective light bulb. ( ➞P. 428)
Bulb position
⬛Front
a Front turn signal/emergency flashers (vehicles with halogen head-
lights)
b Front fog lights
✽
cFront position lights (vehicles with halogen headlights)
d Headlight low beam (vehicles with halogen headlights)
e Headlight high beam (vehicles with halogen headlights)
12345KBRO620815E
RAIZE_OM_General_BZ358E.book 352 ページ 2022年5月17日 火曜日 午後1時59分
Page 355 of 516
3536-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
⬛Rear
a Rear turn signal/emergency flashers
b Back-up lights
c License plate lights
312KBRO620801N
RAIZE_OM_General_BZ358E.book 353 ページ 2022年5月17日 火曜日 午後1時59分
Page 356 of 516
3546-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Bulb replacement procedure
▶Vehicles with halogen headlights
Open the hood before you work on th e headlights, front position lights, or
front turn signal/emergency flashers.
⬛Headlight low beam/high beam (v ehicles with halogen headlights)
a Open the hood, and rotate the
socket to remove it
aLow beam (outside)
b High beam (inside)
b Hold down the claw and remove
the light bulb
12
KBRO620816N
KBRO620817N
RAIZE_OM_General_BZ358E.book 354 ページ 2022年5月17日 火曜日 午後1時59分
Page 357 of 516
3556-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
cReplace and attach the light bulb
Align the light bulb’s claws (3 locations)
to the mounted area, insert it and
secure it in place.
aLow beam (outside)
b High beam (inside)
d Attach the socket
After attaching the socket, turn on the
headlights and make sure there is no
light leaking out.
12
KBRO620818N
KBRO620819N
RAIZE_OM_General_BZ358E.book 355 ページ 2022年5月17日 火曜日 午後1時59分
Page 358 of 516
3566-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
⬛Front turn signal/emergency flashers (vehicles with halogen
headlights)
a Open the hood, and rotate the
socket to remove it
b Remove the light bulb
c Attach the new light bulb, rotate
the socket and set it in place
KBRO620820N
KBRO620821N
KBRO620822N
RAIZE_OM_General_BZ358E.book 356 ページ 2022年5月17日 火曜日 午後1時59分
Page 359 of 516
3576-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
⬛Front position lights (vehicles with halogen headlights)
a Open the hood, and rotate the
socket to remove it
b Remove the light bulb
c Attach the new light bulb, rotate
the socket and set it in place
KBRO620823N
KBRO620824N
KBRO620825N
RAIZE_OM_General_BZ358E.book 357 ページ 2022年5月17日 火曜日 午後1時59分