2023 NISSAN FRONTIER display

[x] Cancel search: display

Page 357 of 572

NISSAN FRONTIER 2023  Owners Manual RAB SYSTEM OPERATION
1RAB system warning light and RAB sys-
tem indicator
2Steering-wheel-mounted controls (lef t
side)
3Center display When the shif t lever is in the R (Reverse)
position and the

Page 358 of 572

NISSAN FRONTIER 2023  Owners Manual TURNING THE RAB SYSTEM
ON/OFF
Perform the following steps to turn the RAB
system on or off.
1. Press the
button until “Settings” dis-
plays in the vehicle information display
and then press the EN

Page 360 of 572

NISSAN FRONTIER 2023  Owners Manual •Once the automatic brake control
operates, it does not operate again if
the vehicle approaches the same
obstacle.
• The automatic brake control can only
operate for a short period of time.
Theref

Page 363 of 572

NISSAN FRONTIER 2023  Owners Manual 3. AEB with Pedestrian Detection systemwarning light
The AEB system operates at speeds above
approximately 3 mph (5 km/h). For the pe-
destrian detection function, the system
operates at speeds betwee

Page 364 of 572

NISSAN FRONTIER 2023  Owners Manual TURNING THE AEB WITH
PEDESTRIAN DETECTION SYSTEM
ON/OFF
Perform the following steps to enable or
disable the AEB with Pedestrian Detection
system.
1. Press the
button until “Settings” dis-
plays i

Page 369 of 572

NISSAN FRONTIER 2023  Owners Manual Condition A:
In the following conditions, the AEB with
Pedestrian Detection system warning light
blinks and the system will be turned off
automatically:
• The radar sensor picks up interferencefrom

Page 370 of 572

NISSAN FRONTIER 2023  Owners Manual SYSTEM MALFUNCTION
If the AEB with Pedestrian Detection sys-
tem malfunctions, it will be turned off auto-
matically, a chime will sound, the AEB with
Pedestrian Detection system warning light
(orange

Page 375 of 572

NISSAN FRONTIER 2023  Owners Manual TURNING THE I-FCW SYSTEM
ON/OFF
Perform the following steps to turn the
I-FCW system ON or OFF.
1. Press the
button until “Settings” dis-
plays in the vehicle information display.
Use the
button t