2023 LEXUS RX transmission

1
RX500h/RX350h_QG_U
Pictorial Index ............................................................................................................................. 3
Floor Mat Installation Floor Mat Installation......................................................................................................... ..............11
Hybrid System Hybrid System.................................................................................................................. ................ 12
Entering and Exiting
Keys ........................................................................................................................... ........................... 16
Smart Access System with Push-button Start .................................................................... 18
When Driving
Power (Ignition) Switch ........................................................................................................ ........ 19
EV drive mode .................................................................................................................. .............. 22
Automatic transmission......................................................................................................... ......23
Hybrid transmission ............................................................................................................ .......... 27
Turn Signal Lever .............................................................................................................. ............ 30
Parking Brake.................................................................................................................. ................. 31
Brake Hold ..................................................................................................................... ..................33
Multi-information Display...................................................................................................... .....34
Displayed content.............................................................................................................. ............35
Headlights Switch .............................................................................................................. ............39
AHS (Adaptive High-beam System).....................................................................................40
AHB (Automatic High Beam).................................................................................................. 42
Fog Light Switch ............................................................................................................... .............. 44
Windshield Wipers and Washer.............................................................................................45
Rear Window Wiper and Washer ......................................................................................... 47
Driving Mode Select Switch ..................................................................................................... 48
Contents
The Quick Guide is not intended as a substitute for yourOWNER’S MANUAL. We strongly encourage you to review
the OWNER’S MANUAL and supplementary manuals so you
will have a better understandin g of your vehicle’s capabilities
and limitations.

14
RX500h/RX350h_QG_U
Because there is no engine sound or vibration, it is easy to mistake the hybrid electric vehi-
cle for being off when it is actu ally still running, as indicated by the “READY” indicator being
illuminated. For safety, make sure to always shift the shift position to P and apply the parking
brake when parked.
The following sounds or vibrations may occur when the hybrid system is operating and are
not a malfunction:
• Motor sounds may be heard from the engine compartment.
• Sounds may be heard from the hybrid battery (traction battery) behind the rear seats when the hybrid syst em starts or stops.
• Relay operating sounds such as a snap or soft clank will be emitted from the hybrid battery
(traction battery), under the rear seats, when the hybrid sy stem is started or stopped.
• Sounds from the hybrid system may be heard when the back door is open.
• Sounds may be heard from the transmission when the gasoline engine starts or stops,
when driving at low speeds, or during idling.
• Engine sounds may be heard when accelerating sharply.
• Sounds may be heard due to regenerative braking when the brake pedal is depressed or as the accelerator pedal is released.
• Vibration may be felt when the gasoline engi ne starts or stops.
• Cooling fan sounds may be heard from th e air intake vents under the rear seats.
When the vehicle has run out of fuel and the hybrid system cannot be started, refuel the
vehicle with at least enough gasoline to make the low fuel level warning light go off. If there is
only a small amount of fuel, the hybrid system may not be able to start. (The standard amount
of fuel is about 2.6 gal. [9.8 L, 2.2 Imp. gal.], when the vehicle is on a level surface. This value
may vary when the vehicle is on a slope. Add extra fuel when the vehicle is inclined.)
Sounds and vibrations specific to a hybrid electric vehicle
Running out of fuel

23
RX500h/RX350h_QG_U
Shift lever
Operate the shift lever gently and
securely in the direction of the arrow
on the shift position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift leve r after each shift-
ing operation to allow it to return to its
regular position ( ).
Shifting to M is only possible when the
shift position is in D.
When shifting from P to N, D or R,
from N, D, M or R to P, from D or M to
R, or from R to D, ensure that the brake
pedal is being depressed and the vehi-
cle is stationary.
Shift position indicator
Meter display:
The current shift posi tion is illuminated.
Shift lever display:
The current shift posi tion is illuminated.
When selecting the shift position, make
sure that the shif t position has been
changed to the desired position by
checking the shift position indicator
provided on the instrument cluster.
P position switch
Fully stop the vehicle and set the park-
ing brake, and then press the P position
switch.
When the shift position is changed to P,
the switch illuminates.
Check that the shift position indicator
shows P.
Automatic transmission (RX500h)
Shift position display and how to change the shift position
A
B
C

26
RX500h/RX350h_QG_U
To enter M mode, shift the shift position to M. Gears can be selected by operating the pad-
dle shift switches, allowing you to drive in the gear of your choosing.
1Upshifting
2Downshifting
The gear changes once every time the pad-
dle shift switch is operated.
The selected gear, from M1 to M6, will be
fixed and displayed on the meter.
Selecting gears in the M position
When in the M position, the gear will not change unless the paddle shift switches are oper-
ated. Also, the gear will not shif t when the vehicle speed is low, even if an upshift operation is
performed.
However, even when in the M position, the gears will be automatically changed in the fol-
lowing situations:
● When vehicle speed drops (downshift only).
● When vehicle speed increases (upshift only).
● When the accelerator pedal is firmly depressed.
● When it is necessary to protect the transm ission when the transmission fluid tempera-
ture is high or low, or other reasons.

27
RX500h/RX350h_QG_U
Shift lever
Operate the shift lever gently and
securely in the direction of the arrow
on the shift position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift leve r after each shift-
ing operation to allow it to return to its
regular position ( ).
Shifting to S is only possible when the
shift position is in D.
When shifting from P to N, D or R,
from N, D, S or R to P, from D or S to R,
or from R to D, ensure that the brake
pedal is being depressed and the vehi-
cle is stationary.
Shift position indicator
Meter display:
The current shift posi tion is illuminated.
Shift lever display:
The current shift posi tion is illuminated.
When selecting the shift position, make
sure that the shif t position has been
changed to the desired position by
checking the shift position indicator
provided on the instrument cluster.
P position switch
Fully stop the vehicle and set the park-
ing brake, and then press the P position
switch.
When the shift position is changed to P,
the switch illuminates.
Check that the shift position indicator
shows P.
Hybrid transmission (RX350h)
Shift position display and how to change the shift position
A
B
C