2023 LEXUS RX low beam

40
RX500h/RX350h_QG_U
1Press the Adaptive High-beam System
switch.
2Turn the headlight switch to the or position.
When the headlight switch lever is in
the low beam positi on, the AHS will be
enabled and the AHS indicator will illu-
minate.
AHS (Adaptive High-bea m System) (if equipped)
The Adaptive High-beam System uses a front camera located on the upper portion of the
windshield to detect the brightness of the lights of vehicles ahead, streetlights, etc., and
automatically controls the light distribution of the headlights.
Using the Adaptive High-beam System

41
RX500h/RX350h_QG_U
■Changing to the high beams
Push the lever forward.
The AHS indicator will turn off and the high
beam indicator will turn on.
Pull the lever to its original position to
enable the Adaptive High-beam System
again.
■Changing to the low beams
Press the Adaptive High-beam System
switch.
The AHS indicator will turn off.
Press the switch to enable the Adaptive
High-beam System again.
■Temporarily changing to the low beams
Pull the lever rearward and then return it to
its original position.
The high beams will illuminate while the
lever is pulled, however, after the lever is
returned to its original position, the low
beams will remain on for a certain amount
of time. After this, the Adaptive High-beam
System will operate.
Turning the high beams on/off manually

42
RX500h/RX350h_QG_U
1Press the Automatic High Beam
switch.
2Turn the headlight switch to the or position.
When the headlight switch lever is in
the low beam position, the AHB system
will be enabled and the AHB indicator
will illuminate.
AHB (Automatic High Beam) (if equipped)
The Automatic High Beam uses a front camera located on the upper portion of the wind-
shield to detect the brightness of the lights of vehicles ahead, streetlights, etc., and auto-
matically changes the head lights between the high beams and low beams.
Using the Automatic High Beam system

43
RX500h/RX350h_QG_U
■Changing to the high beams
Push the lever forward.
The AHB indicator will turn off and the high
beam indicator will turn on.
Pull the lever to its original position to
enable the Automatic High Beam system
again.
■Changing to the low beams
Press the Automatic High Beam switch.
The AHB indicator will turn off.
Press the switch to enable the Automatic
High Beam system again.
■Temporarily switching to the low beams
Pull the lever rearward and then return it to
its original position.
The high beams will illuminate while the
lever is pulled, however, after the lever is
returned to its original position, the low
beams will remain on for a certain amount
of time. After this, the Automatic High
Beam system will operate.
Turning the high beams on/off manually

102
What to do if...
RX500h/RX350h_QG_U
See the “OWNER’S MANUAL”
Turn signal indicator
Intuitive parking assist
OFF indicator
(if equipped)
(U.S.A.)
Headlight indicatorDriving assist information
indicator
(Canada)
Tail light indicator
(flashes)
Slip indicator
Headlight high beam indicatorVSC OFF indicator
AHS indicator (if equipped)
AHB indicator (if equipped)“READY” indicator
Fog light indicator
(U.S.A.)Parking brake indicator
PCS warning light
(Canada)
(green/white)
Cruise control indicatorBrake hold standby
indicator
(green/white)
Dynamic radar cruise control
indicatorBrake hold operated
indicator
(green/white)
LDA indicatorEV indicator
LDA OFF indicator
(if equipped)Low outside temperature
indicator
(green/white)
LTA indicator
(green/white)
PDA indicator
BSM outside rear view mirror
indicatorsStop light indicator
For further information, refer to the “OWNER’S MANUAL”.