What to do if...
105
RX500h/RX350h_QG_U
1Ensure that the shift position is in P and
depress the brake pedal.
2Touch the Lexus emblem side of the
electronic key to the power switch.
When the electronic key is detected, a
buzzer will sound and the power switch
mode will change to ON.
When the smart access system with
push-button start is deactivated in
customization setting, the power
switch will turn to ACC.
3Firmly depress the brake pedal and check th at is shown on the multi-information
display.
4Press the power switch shortly and firmly.
In the event that the hybrid system still cannot be started, contact your Lexus dealer.
Starting the hybrid system
If the electronic key battery becomes deplet ed, a warning message will be shown on the
multi-information display. Replac e the battery with a new one. For instructions on replacing
the battery, refer to the “OWNER’S MANUAL”.
If you need further assistance , contact your Lexus dealer.
108
What to do if...
RX500h/RX350h_QG_U
■Enabling outside manual release handle operation using the mechanical key
Operation of a manual release handle can be enabled by unlocking a door with the
mechanical key.
1Insert a plastic card, etc. into the gap in
the door handle to pry up the cover.
To avoid damage, do not apply exces-
sive force to the cover.
2Remove the cover by pressing it on the
rear.
3Using the mechanical key, turn the lock
cylinder to the unlock side to enable
the manual release handle operation.
The mechanical key can only be
inserted in one direction, as the key
only has a groove on one side.
If the key cannot be inserted in a lock
cylinder, turn it over and re-attempt to
insert it.
