
02
2-11
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only 
lubricants of the proper quality. The correct lubricants also help promote engine 
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
LubricantVolumeClassification
Engine oil 
*1 *2 
(drain and refill)
Smartstream G1.6 4.02 US qt. (3.8 b) API SN PLUS/SP or ILSAC GF-6
Manual transmission fluid 1.59 ~ 1.69 US qt. 
(1.5 ~ 1.6 b) HK SYN MTF 70W (SK)
SPIRAX S6 GHME 70W MTF 
(H.K.SHELL)
GS MTF HD 70W (GS CALTEX)
API GL-4, SAE 70W, TGO-9
Intelligent variable transmission 
fluid 6.34 US qt. (6.7 b) CVTF (SP-CVT1) 
*3
CoolantM/T 5.94 US qt. (5.62 b)
Mixture of antifreeze and water 
(Phosphate-based Ethylene glycol 
coolant for aluminum radiator)
IVT 6.32 US qt. (5.78 b)
Brake/clutch fluid 0.74 ~ 0.85 US qt. 
(0.7 ~ 0.8 b) SAE J1704 DOT-4 LV, FMVSS 116 
DOT-4, ISO4925 CLASS-6
Fuel 11.89 US gal. (45 b)Refer to “Fuel requirements” in 
chapter 1.
M/T: Manual transmission
IVT: Intelligent variable transmission
*1 : Refer to the recommended SAE viscosity numbers on page 12.
*2 : Requires 
If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine 
oil and engine oil filter must be replaced as indicated severe maintenance condition.
*3 : Use only specified genuine Intelligent variable transmission fluid. The use of non-
specified fluid (even marked as compatible with genuine) could result in shift quality 
deterioration and vibrations, eventually, the transmission failure. 

Vehicle Information2-12
Recommended SAE Viscosity 
Number
 CAUTION
Always be sure to clean the area around 
any filler plug, drain plug, or dipstick 
before checking or draining any 
lubricant. This is especially important 
in dusty or sandy areas and when the 
vehicle is used on unpaved roads. 
Cleaning the plug and dipstick areas 
will prevent dirt and grit from entering 
the engine and other mechanisms that 
could be damaged. Engine oil viscosity (thickness) has an 
effect on fuel economy and cold weather 
operating (engine start and engine oil 
flowability). Lower viscosity engine oils 
can provide better fuel economy and 
cold weather performance, however, 
higher viscosity engine oils are required 
for satisfactory lubrication in hot 
weather.
Using oils of any viscosity other than 
those recommended could result in 
engine damage.
When choosing an oil, consider the 
range of temperature your vehicle will be 
operated in before the next oil change. 
Proceed to select the recommended oil 
viscosity from the chart.
Temperature Range for SAE Viscosity Numbers
Temperature °C -30 -20 -10 0 10 20 30 40 50
(°F) -10 0 20 40 60 80 100 120
Engine Oil
0W-20*Î 0W-20*Î
*1 : Requires 
If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine 
oil and engine oil filter must be replaced as indicated severe maintenance condition.
An engine oil displaying this API Certification Mark conforms to 
the international Lubricant Specification Advisory Committee 
(ILSAC). It is recommended to only use engine oils that uphold 
this API Certification Mark. 

06
6-87
Highway Driving
Tires
Adjust the tire inflation, as specified. 
Under-inflation may overheat or damage 
the tires.
Do not install worn-out or damaged tires, 
which may reduce traction or adversely 
affect vehicle handling. This could lead 
to sudden tire failure that may cause 
loss of vehicle control resulting in an 
accident.
 Information
Never over-inflate your tires above the 
maximum inflation pressure, as specified 
on your tires.
Fuel, Engine Coolant and Engine Oil
Driving at higher speeds on the highway 
consumes more fuel and is less efficient 
than driving at a slower, more moderate 
speed. Maintain a moderate speed in 
order to conserve fuel when driving on 
the highway.
Be sure to check both the engine coolant 
level and the engine oil before driving.
Drive Belt
A loose or damaged drive belt may 
overheat the engine.
Reducing the Risk of a Rollover
Your multi-purpose passenger vehicle is 
defined as a Sports Utility Vehicle (SUV). 
SUV's have higher ground clearance 
and a narrower track to make them 
capable of performing in a wide variety 
of off-road applications. The specific 
design characteristics give them a higher 
center of gravity than ordinary vehicles 
making them more likely to roll over if 
you make abrupt turns. Utility vehicles 
have a significantly higher rollover rate 
than other types of vehicles. Due to this 
risk, driver and passengers are strongly 
recommended to buckle their seat belts. 
In a rollover crash, an unbelted person 
is significantly more likely to die than a 
person wearing a seat belt.
There are steps that a driver can make 
to reduce the risk of a rollover. If at all 
possible, avoid sharp turns or abrupt 
maneuvers, do not load your vehicle 
with heavy cargo on the roof, and never 
modify your vehicle in any way.
 WARNING
Utility vehicles have a significantly 
higher rollover rate than other types of 
vehicles. To prevent rollovers or loss of 
control:
[ Take corners at slower speeds than 
you would with a passenger vehicle.
[  Avoid sharp turns and abrupt 
maneuvers.
[  Do not modify your vehicle in any 
way that you would raise the center 
of gravity.
[  Keep tires properly inflated.
[  Do not carry heavy cargo on the roof. 

While Driving6-90
Change to "winter Weight" Oil if 
Necessary
In some climates it is recommended that 
a lower viscosity "winter weight" oil be 
used during cold weather. See chapter 8 
for recommendations. If you aren't sure 
what weight oil you should use, consult 
an authorized HYUNDAI dealer.
Check Battery and Cables
Winter puts additional burdens on the 
battery system. Visually inspect the 
battery and cables as described in 
chapter 8. The level of charge in your 
battery can be checked by an authorized 
HYUNDAI dealer or a service station.
Check Spark Plugs and Ignition 
System
Inspect your spark plugs as described in 
chapter 8 and replace them if necessary. 
Also check all ignition wiring and 
components to be sure they are not 
cracked, worn or damaged in any way.
Use Approved Window Washer Anti-
freeze in System
To keep the water in the window washer 
system from freezing, add an approved 
window washer anti-freeze solution in 
accordance with instructions on the 
container. Window washer anti-freeze is 
available from an authorized HYUNDAI 
dealer and most auto parts outlets. Do 
not use engine coolant or other types 
of antifreeze as these may damage the 
paint finish.
Do Not Let Your Parking Brake 
Freeze
Under some conditions your parking 
brake can freeze in the engaged position. 
This is most likely to happen when 
there is an accumulation of snow or 
ice around or near the rear brakes or 
if the brakes are wet. If there is a risk 
the parking brake may freeze, apply 
it only temporarily while you put the 
gear selector lever in P and block the 
rear wheels so the car cannot roll. Then 
release the parking brake.
Do Not Let Ice and Snow Accumulate 
Underneath
Under some conditions, snow and ice 
can build up under the fenders and 
interfere with the steering. When driving 
in severe winter conditions where this 
may happen, you should periodically 
check underneath the car to be sure the 
movement of the front wheels and the 
steering components is not obstructed.
Don't Place Foreign Objects 
or Materials in the Engine 
Compartment
Placement of foreign object or materials 
which prevent cooling of the engine, in 
the engine compartment, may cause a 
failure or combustion. The manufacturer 
is not responsible for the damage caused 
by such placement.
To Keep Locks from Freezing
To keep the locks from freezing, squirt 
an approved de-icer fluid or glycerine 
into the key opening. If a lock is covered 
with ice, squirt it with an approved de-
icing fluid to remove the ice. If the lock 
is frozen internally, you may be able to 
thaw it out by using a heated key. Handle 
the heated key with care to avoid injury. 

08
8-7
Follow Normal Maintenance Schedule if the vehicle is usually operated where none of 
the following conditions apply. If any of the following conditions apply, you must follow 
the Maintenance Under Severe Usage Conditions.
[ Repeated short distance driving.
[  Driving in dusty conditions or sandy areas.
[  Extensive use of brakes.
[  Driving in areas where salt or other corrosive materials are used.
[  Driving on rough or muddy roads.
[  Driving in mountainous areas.
[  Extended periods of idling or low speed operation.
[  Driving for a prolonged period in cold temperatures and/or extremely humid 
climates.
[  More than 50% driving in heavy city traffic during hot weather above 90°F (32°C).
[  Engine oil usage which is not recommended (Mineral type, Semi-synthetic, lower 
grade spec, etc.)
For additional information or assistance see your authorized HYUNDAI dealer.
NOTICE
After 10 years or 100,000 miles, we recommend to use severe maintenance 
schedule. 
SCHEDULED MAINTENANCE SERVICES 

Maintenance8-8
Normal Maintenance Schedule
MAINTENANCE   INTERVALS
MAINTENANCE  
ITEM Months 12 24 36 48 60 72 84 96 108 120 132 144 156
Miles×1,000 8 16 24 32 40 48 56 64 72 80 88 96 104 Km×1,000 13 26 39 52 65 78 91 104 117 130 143 156 169
Engine oil and engine oil filter 
*1
RRRRRRRRRRRRR
Fuel additives 
*2
Add fuel additives every 8,000 miles (13,000 km) or 12 months
Air cleaner filter IIIRIIIRIIIRI
Spark plugs Replace every 96,000 miles (156,000 km) or 144 months
Tires Rotate tires every 8,000 miles (13,000 km)
Climate control air filter
(for evaporator and blower unit) Replace every 8,000 miles (13,000 km) or 12 months
Engine coolant At first, replace at 120,000 miles (200,000 km) or 10 years.
Thereafter, replace every 24,000 miles (39,000 km) or 36 months
Vacuum hose IIIIIIIIIIIII
Battery condition IIIIIIIIIIIII
Drive belts 
*3
At first, inspect at 48,000 miles (78,000 km) or 72 months.
Thereafter, inspect every 8,000 miles (13,000 km) or 12 months
I : Inspect and if necessary, adjust, correct, clean or replace.
R : Replace or change.*1 : 
Requires API SN PLUS (or above) grade engine oil. If a lower grade engine oil is used, then the engine oil and engine oil filter 
must be replaced at every 5,000 miles (8,000 km) or 6 months as indicated for severe maintenance condition. 
*2 : 
If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your 
authorized HYUNDAI dealer along with information on how to use them. Do not mix other additives.
*3 : 
The drive belt should be replaced when cracks occur or tension is reduced excessively. 

08
8-11
Maintenance Under Severe Usage Conditions
The following items must be serviced more frequently on cars normally used under 
severe driving conditions. Refer to the chart below for the appropriate maintenance 
intervals.
I: Inspect and if necessary, adjust, correct, clean or replace.
R : Replace or change.
MAINTENANCE ITEMMAINTENANCE 
OPERATION MAINTENANCE 
INTERVALS DRIVING 
CONDITION
Engine oil and filter RE
 very 5,000 miles or 
6 months A, B, C, D, E, F, 
G, H, I, J, K, L
Air cleaner filter RMore frequently C, E
Spark plugs RMore frequently A, B, H, I, K
Intelligent variable transmission 
fluid (If equipped) R Every 60,000 milesA, C, D, E, F, G, 
H, I, J
Manual transmission fluid R Every 80,000 milesC, D, F, G, H, 
I, J
Front brake disc/pads, calipers IMore frequently C, D, G, H
Rear brake shoes or disc/pads IMore frequently C, D, G, F
Parking brake IMore frequently C, D, G, H
Steering gear box, linkage & 
boots/lower arm ball joint, 
upper arm ball joint I
More frequently C, D, E, F, G, 
H, I
Drive shafts and boots IMore frequently C, D, E, F, G, 
H, I, J
Climate control air filter 
(for evaporator and blower unit) R
More frequently C, E
Severe Driving Conditions
A.  Repeatedly driving short distances 
of less than 5 miles (8 km) in normal 
temperature or less than 10 miles (16 
km) in freezing temperature
B.  Extensive engine idling or low speed  driving for long distances
C.  Driving on rough, dusty, muddy,  unpaved, graveled or saltspread roads
D.  Driving in areas using salt or other  corrosive materials or in very cold 
weather
E.  Driving in sandy areas F.  Driving in heavy traffic area over 90°F 
(32°C)
G.  Driving on uphill, downhill, or  mountain road
H. Towing a Trailer, or using a camper, or  roof rack
I.  Driving as a patrol car, taxi, other  commercial use or vehicle towing
J.  Driving over 106 mph (170 km/h)
K.  Frequently driving in stop-and-go  conditions
L.  Engine oil usage which is not 
recommended (Mineral type, Semi-
synthetic, lower grade spec, etc.) 

08
8-13
Air Cleaner Filter
A genuine HYUNDAI air cleaner filter 
is recommended when the filter is 
replaced.
Spark Plugs
Make sure to install new spark plugs of 
the correct heat range.
When assembling parts, be sure to 
wipe out foreign substances inside 
and outside of the boot bottom of the 
ignition coil and the insulator of the 
spark plug with a soft cloth to prevent 
contamination of the spark plug 
insulator.
Cooling System
Check cooling system components, such 
as radiator, coolant reservoir, hoses and 
connections for leakage and damage. 
Replace any damaged parts.
Engine Coolant
The coolant should be changed at the 
intervals specified in the maintenance 
schedule.
Intelligent Variable Transmission 
(IVT) Fluid (if equipped)
Intelligent Variable Transmission (IVT) 
fluid should not be checked under 
normal usage conditions. But in 
severe conditions, the fluid should be 
changed at an authorized HYUNDAI 
dealer in accordance to the scheduled 
maintenance at the beginning of this 
chapter.
NOTICE
Intelligent Variable Transmission (IVT) 
fluid color is basically light amber.
As the vehicle is driven, the Intelligent 
Variable Transmission (IVT) fluid will 
begin to look darker. This is a normal 
condition and you should not judge the 
need to replace the fluid based upon 
the changed color.
NOTICE
The use of a non-specified fluid could 
result in transmission malfunction 
and failure. Use only the specified 
fluid (recommended Lubricants and 
Capacities is in chapter. 2).
Manual Transmission Fluid  
(if equipped)
Inspect the manual transmission fluid 
according to the maintenance schedule.
Brake Hoses and Lines
Visually check for proper installation, 
chafing, cracks, deterioration and any 
leakage. Replace any deteriorated or 
damaged parts immediately.