2023 HYUNDAI PALISADE lock

Seats & Safety System3-18
B0053EU03
B0053EU15
A: 7-seater
B: 8-seater
Seatback angle
To recline the seatback:
1.

Pull up the seatback recline lever.
2. Hold the lever and adjust the seatback of the seat to the position you desire.
3. Release the lever and make sure the seatback is locked in place. The lever
MUST return to its original position for
the seatback to lock.
If equipped with 7-seater or 8-seater,
the central seat moves together with the
drivers side second row seat.
à The seatbacks can be folded with the
seatback recline lever.
B0053EU04
Seatback folding / Walk-in function

[The sea
tback will fold and the seat will
slightly move forward, if the switch is
pressed.

[ The function operates when the gear
is in P (Park) with the door open.

[ While the seatback folding or walk-in
function is operating, if the switch is
pressed, the seat will stop moving. If
the switch is pressed again, the seat
will continue the adjustment.

[ While the seatback folding or walk-in
function is operating, if the engine
is started, the seat will stop moving
momentarily. If the engine starts, the
seat will continue the adjustment.
If equipped with 7-seater or 8-seater,
the central seat moves together with the
drivers side second row seat.

03
3-19
Manual adjustment (third row)
B0053EU05
Seatback angle
To recline the seatback:
1.
Pull the seatback recline strap.
2. Hold the strap and adjust the seatback angle to the position you desire.
3. Release the strap and make sure the seatback is locked in place. The strap
MUST return to its original position for
the seatback to lock.
Power adjustment (third row)
B0053EU06
Seatback angle
Press the switch (
) or () to adjust the
seatback angle.
When the seatback is folded, press
the switch (
), the seatback will
automatically unfold.

Seats & Safety System3-20
Walk-in seat (2nd row seat)
B0053KO11
B0053KO12
B0053KO13
To get in or out of the 3rd row seat,
1. Routing the seat belt webbing through the rear seat belt guide clip.
After inserting the seat belt, tighten
the belt webbing by pulling it up.
2. Push the walk-in switch located in upper part M of 2
nd row seat or side
part N of 2nd row seat.
3. The 2nd row seatback will be folded
and push the seat to the farthest
forward position. After getting in or out, slide the 2
nd row
seat to the farthest rearward position and
pull the seatback firmly backward until it
clicks into place. Make sure that the seat
is locked in place.
WARNING
Never attempt to adjust while the
vehicle is moving or the 2nd row seat
is occupied as the seat may suddenly
move and cause the passenger on the
seat to be injured.

03
3-21
WARNING
B0053EU16

[If the walk-in switch does not work,
pull the strap M located on the lower
left side of the seat. Then you can
move the 2
nd row seat forward.
(7 passenger vehicle

- Left seat : lower right side

- Right seat : lower left side
8 passenger vehicle

- Right seat : lower left side)

[ Never attempt to pull the strap M
while the 2
nd row seat is occupied
as the seat may suddenly move and
cause the passenger on the seat to
be injured. Use only the strap when
the walk-in switch does not work.
Folding the rear seats
The rear seatbacks can be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.
Before folding the rear seats, lower the
head restraint to the lowest positon and
store the seat belt buckles in the holders
and webbing in the guide.
If you want to use the rear seats, make
sure the seatbacks are upright and
securely locked in place. Always return
the head restraint and seatbelt to its
proper position.
B0053EE24
Third row seatback folding (if equipped)
Second and third row seatback folding
can be done fr
om the Settings menu in
the infotainment system screen. Select:

- 6HWXS

Seats & Safety System3-22
Rear seatback manual folding
To fold down the rear seatback:
1.
Set the front seatback to the upright
position and if necessary, slide the
front seat forward.
2. Lower the rear head restraints to the lowest position.
B0053KO11
3. Route the seat belt webbing through the rear seat belt guides to prevent
the belts from being trapped behind
or under the seats.
B0053EU07
B0053EU08
A: 2nd row seat
B: 3rd row seat
4. Pull on the seatback folding lever (2nd
row seat) or pull the strap backward
(3
rd row seat), then fold the seat
toward the front of the vehicle. When
you return the seatback to its upright
position, always be sure it has locked
into posaition by pushing on the top
of the seatback.

03
3-23
B0053EU09
B0053EU10
A: 2nd row seat
B: 3rd row seat
5. To use the rear seat, lift and unfold the seatback to the upright position
by pulling up the folding lever (2
nd row
seat) or pulling strap backward (3rd
row seat). Push the seatback firmly
until it clicks into place. Make sure the
seatback is locked in place.
6. Return the rear seat belt to the proper position.
WARNING
When returning the rear seatback from
a folded to an upright position, hold the
seatback and return it slowly. Ensure
that the seatback is completely locked
into its upright position by pushing on
the top of the seatback. In an accident
or sudden stop, the unlocked seatback
could allow cargo to move forward with
great force and enter the passenger
compartment, which could result in
serious injury or death.
WARNING
Do not place objects in the rear seats,
since they cannot be properly secured
and may hit vehicle occupants in a
collision causing serious injury or death.
WARNING
Make sure the engine is off, the shift
button is in P (Park), and the parking
brake is securely applied whenever
loading or unloading cargo. Failure
to take these steps may allow the
vehicle to move if the shift button
is inadvertently shifted to another
position.
CAUTION

[Be careful when loading cargo
through the rear passenger seats
to prevent damage to the vehicle
interior.

[ When cargo is loaded through the
rear passenger seats, ensure the
cargo is properly secured to prevent
it from moving while driving.

[ Unsecured cargo in the passenger
compartment can cause damage to
the vehicle or injury to it's occupants.

Seats & Safety System3-26
Armrest (Second row seat)
B0053KO09
B0053KO10
A: 7-seater
B: 8-seater
The armrest is located in the center of
the rear seat. Pull the armrest down from
the seatback to use it.
To adjust the armrest at a convenient
angle, lower the armrest from the highest
position to the lowest position, and lift it
up to fixed on it.
Since it cannot be adjusted downward
after fixing, lift the armrest slightly more
than the highest position, then lower it
to the lowest position and adjust while
lift it up.
Head Restraint
The vehicle’s front and rear seats
have adjustable head restraints. The
head restraints provide comfort for
passengers, but more importantly they
are designed to help protect passengers
from whiplash and other neck and spinal
injuries during an accident, especially in
a rear impact collision.
WARNING
To help reduce the risk of serious
injury or death in an accident, take the
following precautions when adjusting
your head restraints:

[ Always properly adjust the head
restraints for all passengers BEFORE
starting the vehicle.

[ NEVER let anyone ride in a seat
with the head restraint removed or
reversed.

[
B0701EU01
Adjust the head restraints so the
middle of the head restraint is at the
same height as the height of the top
of the eyes.

[ NEVER adjust the head restraint
position of the driver’s seat when the
vehicle is in motion.

[ Adjust the head restraint as close to
the passenger’s head as possible. Do
not use a seat cushion that holds the
body away from the seatback.

[ Make sure the head restraint locks
into position after adjusting it.

03
3-29
B0052KO18
B0052KO19
A: Manual seat
B: Power seat
To reinstall the head restraint :
1. Recline the seatback.
2. Put the head restraint poles N into
the holes while pressing the release
button M.
3. Adjust the head restraint to the appropriate height.
4. Recline the seatback P with the seatback angle switch O.
WARNING
Always make sure the head restraint
locks into position after reinstalling and
adjusting it properly.
Rear seat head restraints
B0701EU03
*: If equipped
The rear seats are equipped with head
restraints in all the seating positions for
the passenger’s safety and comfort.
B0701EU04
Adjusting the height up and down
To raise the head restraint:
1.

Pull it up to the desired position M.
To lower the head restraint:
1. Push and hold the release button N on the head restraint support.
2. Lower the head restraint to the desired position O.