2023 HYUNDAI I20 Eco

3-17
03
OBC3030010R
Whilst the engine is running, push either
of the switches to warm the driver’s seat
or front passenger’s seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.

[Each time you push the switch, the
temperature setting of the seat is
changed as follows:


OFFJHIGH ()JMIDDLE ()JLOW ()
K

[The seat warmer defaults to the OFF
position whenever the ignition switch
is turned on.

[When pressing the switch for more
than 1.5 seconds with the seat warmer
operating, the seat warmer will turn
OFF.
Rear Occupant Alert (ROA)
(if equipped)
Rear Occupant Alert is provided to help
prevent the driver from leaving the
vehicle with the rear passenger left in
the vehicle.
System setting
To use Rear Occupant Alert, it must be
enabled from the Settings menu in the
infotainment system screen. Select:
 6HWXS

3-20
Safety system
Seat belt warning light
Driver’s seat belt
„ Instrument cluster
1GQA2083
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time you
turn the ignition switch ON regardless of
belt fastening.
If the seat belt is not fastened when the
ignition switch is turned ON or if it is
disconnected after the ignition switch
is turned ON, the seat belt warning light
will illuminate until the belt is fastened.
If you start to drive without the seat belt
fastened or you unfasten the seat belt
when you drive under 12mph (20km/h),
the corresponding warning light will
continue to illuminate until you fasten
the seat belt.
If you continue to drive without the
seat belt fastened or you unfasten the
seat belt when you drive over 12mph
(20km/h), the seat belt warning chime
will sound for approximately 100
seconds and the corresponding warning
light will blink.
Front passenger’s seat belt
(if equipped)
As a reminder to the front passenger, the
front passenger’s seat belt warning lights
will illuminate for approximately
6 seconds each time you turn the ignition
switch ON regardless of belt fastening.
If the seat belt is not fastened when the
ignition switch is turned ON or if it is
disconnected after the ignition
switch is turned ON, the seat belt warning
light will illuminate until the belt is fastened.
If you start to drive without the seat belt
fastened or you unfasten the seat belt
when you drive under 12mph (20km/h), the
corresponding warning light will continue to
illuminate until you fasten the seat belt.
If you continue to drive without the seat
belt fastened or you unfasten the seat belt
when you drive over 12mph (20km/h),
the seat belt warning chime will sound
for approximately 100 seconds and the
corresponding warning light will blink.
WARNING
Riding in an improper position
adversely affects the front passenger’s
seat belt warning system. It is
important for the driver to instruct the
passenger to properly be seated as
instructed in this manual.
i Information
‡
Although the front passenger seat is not
occupied, the seat belt warning light will
blink or illuminate for 6 seconds. Also,
when the front passenger gets off the
vehicle whilst the warning is activating,
the warning may continue for 6 seconds
even after the passenger gets off.

3-21
03
Rear seat belt warning
(if equipped)
OBC3030011R
Rear center seat (or all rear seat)
As a reminder to the rear passenger,
the rear passenger’s seat belt warning
lights will illuminate for approximately 6
seconds each time you turn the ignition
switch ON regardless of belt fastening.
If the seat belt is not fastened when
the ignition switch is turned ON,
the corresponding warning light will
illuminate until the seat belt is fastened.
If you start to drive without the seat belt
fastened or you unfasten the seat belt
when vehicle speed is under 12 mph
(20 km/h), the corresponding warning
light will continue to illuminate until you
fasten the seat belt.
If you continue to drive without the seat
belt fastened or you unfasten the seat
belt when vehicle speed is 12 mph (20
km/h) or faster, the seat belt warning
chime will sound for approximately 35
seconds and the corresponding warning
light will blink.
When the seat belt is unfastened whilst
driving, the warning lights will illuminate
when vehicle speed is below 12 mph (20
km/h).
When vehicle speed is 12 mph (20
km/h) or faster, the warning light will
blink and warning chime will sound for
approximately 35 seconds.
Rear left / right side seat (if equipped)
As a reminder to the rear passenger,
the rear passenger’s seat belt warning
lights will illuminate for approximately 6
seconds each time you turn the ignition
switch ON regardless of belt fastening.
Whether or not a passenger is seated :
If the seat belt is not fastened when the
ignition switch is turned ON, the seat
belt warning light will illuminate for
approximately 70 seconds.
If you start to drive without the seat belt
fastened the corresponding warning
light will continue to illuminate for
approximately 70 seconds regardless of
vehicle speed.
If you unfasten the seat belt when
vehicle speed is below 12 mph (20
km/h), the corresponding warning light
will illuminate for approximately 70
seconds. If you unfasten the seat belt
when vehicle speed is above 12 mph
(20 km/h), the seat belt warning chime
will sound for approximately 35 seconds
and the corresponding warning light will
blink.
If the rear door is opened whilst driving
below 12 mph (20 km/h), the warning
light and warning sound will not operate
even if vehicle speed is above 12 mph
(20 km/h).
WARNING
Riding in an improper position
adversely affects the rear passenger’s
seat belt warning system. It is
important for the driver to instruct the
passenger to properly be seated as
instructed in this manual.

3-25
03
CAUTION
The pre-tensioner will activate not only
in a frontal collision but also in a side
collision, if the vehicle is equipped with
a side or curtain air bag.
WARNING

[Always wear your seat belt and sit
properly in your seat.

[Do not use the seat belt if it is loose
or twisted. A loose or twisted seat
belt will not protect you properly in
an accident.

[Do not place anything near the
buckle. This may adversely affect
the buckle and cause it to function
improperly.

[Always replace your pre-tensioners
after activation or an accident.

[NEVER inspect, service, repair or
replace the pre-tensioners yourself.
We recommend that you have the
pre-tensioners inspected, serviced,
repaired or replaced by a HYUNDAI
authorised repairer.

[Do not hit the seat belt assemblies.
WARNING
Do not touch the pre-tensioner seat
belt assemblies for several minutes
after they have been activated. When
the pre-tensioner seat belt mechanism
deploys during a collision, the pre-
tensioner can become hot and can burn
you.
CAUTION
Body work on the front area of
the vehicle may damage the pre-
tensioner seat belt system. Therefore,
we recommend that the system be
serviced by a HYUNDAI authorised
repairer.

3-26
Safety system
8KMB3311/H
The Pre-Tensioner Seat Belt System
consists mainly of the following
components. Their locations are shown
in the illustration above:
(1) SRS air bag warning light
(2) Front retractor pre-tensioner
(if equipped)
(3) SRS control module
OBC3030012R
„Rear
(4) Rear retractor pre-tensioner
(if equipped)
NOTICE
The sensor that activates the SRS
air bag is connected with the pre–
tensioner seat belts. The SRS air bag
warning light on the instrument panel
will illuminate for approximately 6
seconds after the ignition switch is
placed to the ON position, and then it
should turn off.
If the pre-tensioner is not working
properly, the warning light will
illuminate even if the SRS air bag is not
malfunctioning. If the warning light
does not illuminate, stays illuminated
or illuminates when the vehicle is
being driven, we recommend the pre-
tensioner seat belts and/or SRS air bags
be inspected by a HYUNDAI authorised
repairer as soon as possible.

3-29
03
Seat belt use and injured people
A seat belt should be used when an
injured person is being transported.
Consult a physician for specific
recommendations.
One person per belt
Two people (including children) should
never attempt to use a single seat belt.
This could increase the severity of injuries
in case of an accident.
Do not lie down
Sitting in a reclined position when the
vehicle is in motion can be dangerous.
Even when buckled up, the protections
of your restraint system (seat belts
and/or air bags) is greatly reduced by
reclining your seatback.
Seat belts must be snug against your
hips and chest to work properly. During
an accident, you could be twined with
the seat belt, causing neck or other
injuries.
The more the seatback is reclined,
the greater chance the passenger’s
hips will slide under the lap belt or the
passenger’s neck will strike the shoulder
belt.
WARNING

[NEVER ride with a reclined seatback
when the vehicle is moving.

[Riding with a reclined seatback
increases your chance of serious
or fatal injuries in the event of a
collision or sudden stop.

[Driver and passengers should always
sit well back in their seats, properly
belted, and with the seatbacks
upright.
Care of seat belts
Seat belt systems should never be
disassembled or modified. In addition,
care should be taken to assure that
seat belts and belt hardware are not
damaged by seat hinges, doors or other
abuse.
Periodic inspection
All seat belts should be inspected
periodically for wear or damage of any
kind. Any damaged parts should be
replaced as soon as possible.
Keep belts clean and dry
Seat belts should be kept clean and
dry. If belts become dirty, they can be
cleaned by using a mild soap solution
and warm water. Bleach, dye, strong
detergents or abrasives should not be
used because they may damage and
weaken the fabric.
When to replace seat belts
The entire seat belt assembly or
assemblies should be replaced if the
vehicle has been involved in an accident.
This should be done even if no damage
is visible. We recommend that you
consult a HYUNDAI authorised repairer.

3-31
03
Child Restraint System (CRS) always
in the rear
Infants and younger children must be
restrained in an appropriate rearward-
facing or forward-facing CRS that has
first been properly secured to the rear
seat of the vehicle. Read and comply
with the instructions for installation and
use provided by the manufacturer of the
Child Restraint System.
WARNING

[Always follow the Child Restraint
System manufacturer’s instructions
for installation and use.

[Always properly restrain your child in
the Child Restraint System.

[Do not use an infant carrier or a
child safety seat that “hooks” over
a seatback, it may not provide
adequate protection in an accident.

[After an accident, we recommend
a HYUNDAI dealer check the Child
Restraint System, seat belts,
ISOFIX anchorages and top-tether
anchorages.
Selecting a Child Restraint
System (CRS)
When selecting a CRS for your child,
always:

[Make sure a CRS has a label certifying
that it meets applicable Safety
Standards of your country.

[Select a CRS based on your child’s
height and weight. The required label
or the instructions for use typically
provide this information.

[Select a CRS that fits the vehicle
seating position where it will be used.

[Read and comply with the warnings
and instructions for installation and
use provided with a CRS.
Child Restraint System types
There are three main types of Child
Restraint Systems: rearward-facing
seats, forward-facing seats, and booster
seats. They are classified according to
the child’s age, height and weight.

3-33
03
Installing a Child Restraint
System (CRS)
WARNING
Before installing your Child Restraint
System always:
Read and follow the instructions
provided by the manufacturer of the
Child Restraint System.
Failure to follow all warnings and
instructions could increase the risk of
the SERIOUS INJURY or DEATH if an
accident occurs.
WARNING
If the vehicle head restraint prevents
proper installation of a Child Restraint
System, the head restraint of the
respective seating position shall be
readjusted or entirely removed.
After selecting a proper Child Restraint
System and checking that the Child
Restraint System fits properly in the rear
of this vehicle, you are ready to install
the Child Restraint System according to
the manufacturer’s instruction. There are
three general steps in installing the Child
Restraint Systems properly:

[Properly secure the Child Restraint
System to the vehicle. All Child
Restraint Systems must be secured
to the vehicle with the lap belt or lap
part of a lap/shoulder belt or with
the ISOFIX top-tether and/or ISOFIX
anchorage.
[Make sure the Child Restraint System
is firmly secured. After installing a
Child Restraint System to the vehicle,
push and pull the seat forward and
from side-to-side to verify that it is
securely attached to the seat. A Child
Restraint System secured with a seat
belt should be installed as firmly as
possible. However, some side-to- side
movement can be expected.
When installing a Child Restraint
System, adjust the vehicle seat (up
and down, forward and rearward)
so that your child fits in the Child
Restraint System in a comfortable
manner.

[Secure the child in the Child
Restraint System. Make sure the
child is properly strapped in the Child
Restraint System according to the
Child Restraint System manufacturer’s
instructions.
CAUTION
A Child Restraint System in a closed
vehicle can become very hot. To
prevent burns, check the seating
surface and buckles before placing
your child in the Child Restraint
System.