2023 GENESIS GV60 buttons

7-116
Driver Assistance System
5HDU9LHZ0RQLWRURSHUDWLRQ
Parking/View button
OJWEV071100
Press the Parking/View button (1) to turn
on Rear View Monitor.
Press the button again to turn off the
function.
Rear view function
OJWEV071355N
Rear view function shows the area
behind the vehicle while driving or
parking.
Rear View while driving
Rear View while driving will turn on
under the following conditions:

[The Parking/View button (1) is
pressed, while the gear is in N
(Neutral) or D (Drive), and vehicle
speed is 6 mph (10 km/h) or less.

[
is selected among the view buttons
(3) when the Rear View is on.
Rear View while driving will turn off
under the following conditions:

[The gear is shifted to P (Park).

[The Parking/View button (1) is
pressed.

[The infotainment system button (2) is
pressed.

[The Home button (4) is pressed.
Information
The rear view does not turn off when the
gear is in R (Reverse).

7-117
07
Rear View while parking
Rear View while parking will turn on
under the following conditions:

[The gear is shifted to R (Reverse).

[The Parking/View button (1) is
pressed, while the gear is in P (Park),
N (Neutral) or D (Drive), and vehicle
speed is 6 mph (10 km/h) or less.

[
is selected among the view buttons
(3) when the Rear View is on
Rear View while parking will turn off
under the following conditions:

[The gear is shifted to P (Park).

[The Parking/View button (1) is
pressed.

[The Home button (4) is pressed.

[The gear is in N (Neutral) or D (Drive)
when vehicle speed is above 6 mph
(10 km/h).
Rear Wide View
OJWEV071356N
Rear Wide View function shows a wide
view of the area behind the vehicle while
driving or parking.
The operating conditions of the Rear
Wide View function is the same as the
Rear View function. However, when
the gear is in R (Reverse),
must be
selected among the view buttons (3).
Extended Rear View function
Extended Rear View function maintains
showing the rear view when the gear is R
(Reverse), N (Neutral) or D (Drive).
Extended Rear View will turn on under
the following conditions:

[The gear is in P (Park), N (Neutral) or D
(Drive), and vehicle speed is 6 mph (10
km/h) or less.
Extended Rear View will turn off under
the following conditions:

[The gear is shifted to P (Park).

[The Parking/View button (1) is
pressed.

[The infotainment system button (2) is
pressed.

[The Home button (4) is pressed.

[Vehicle speed is above 6 mph (10
km/h).

7-118
Driver Assistance System
Rear Top View
OJWEV071351N
Rear Top View shows the rear top view
of your vehicle when parking for you to
check the distance between an object
and behind the vehicle.
Rear Top View will turn on under the
following conditions:

[The gear is shifted to R (Reverse) and
is selected among the view buttons
(3).

[The Parking/View button (1) is
pressed, while the gear is in P (Park),
N (Neutral) or D (Drive), and vehicle
speed is 6 mph (10 km/h) or less.
Rear Top View will turn off under the
following conditions:

[The gear is shifted to P (Park).

[The Parking/View button (1) is
pressed.

[The infotainment system button (2) is
pressed.

[The Home button (4) is pressed.

[The gear is in N (Neutral) or D (Drive)
when vehicle speed is above 10 km/h
(6 mph).
Information

[The rear views do not turn off when the
gear is in R (Reverse).

[When the Rear View Monitor is turned
on, the previous view mode will be
displayed. However, if the gear is in
R (Reverse), the rear view will be
displayed.

[The rear parking guide lines appear
when using Top View and Rear Top
View.

7-125
07
Rear View while driving
The driver can check the rear view on
the screen while driving. The rear view
while driving consist of a rear view
while driving and a rear wide view while
driving. Also, you can change the view
mode you want to select by pressing
the view button (2) on the infotainment
system screen.
Rear View while driving function will turn
on under the following conditions:

[The Parking/View button (1) is
pressed, while driving above 9 mph
(15 km/h).

[
is selected among the view buttons
(2) when vehicle speed is 9 mph (15
km/h) or less.
Rear View while driving function will turn
off under the following conditions:

[The Parking/View button (1) or the
infotainment system button (1) is
pressed.

[The gear is shifted to P (Park).

[The Parking/View button (1) is
pressed.

[The Home button (4) is pressed.

[Other view modes are selected when
vehicle speed is 9 mph (15 km/h) or
less.
3D view
The 3D view shows the image around the
vehicle from various angles.
You can change angles by tapping the
screen. Press the 3D View button again
to return to the initial angle.
3D view will turn on when the 3D view
is selected among the view buttons (2)
under the following conditions:

[The gear is in P (Park), N (Neutral) or D
(Drive) when vehicle speed is below 9
mph (15 km/h).

[The Surround View Monitor is turned
on when the gear is in R (Reverse).
When the gear is in P (Park), N (Neutral)
or D (Drive), 3D view will turn off under
the following conditions:

[The gear is shifted to P (Park).

[The Parking/View button (1) is
pressed.

[The infotainment system button (3) is
pressed.

[The Home button (4) is pressed.

[Vehicle speed is above 9 mph (15
km/h).
Information
3D view does not display guidelines.

7-170
Driver Assistance System
Remote Operation function operation
status
Operation
status6PDUWNH\/('+D]DUG
warning
light
Under
controlGreen LED
continuously
blinks-
PauseRed LED
continuously
blinksBlinks
OffRed LED
illuminates for
4 seconds and
then turns offBlinks 3
times and
turns off
CompleteGreen LED
illuminates for
4 seconds and
then turns offBlinks 1
time and
turns off
ÃOperation status by the hazard
warning light may not be applicable
based on the regulation of your
country.
ÃIf the smart key is not within the
operating range from the vehicle
(approximately 13 ft. (4 m)), the
smart key LED will not illuminate or
blink. Use the smart key within the
operating range.
How to turn off Remote Operation
function while operating

[Press the Parking/View () button
while the infotainment system screen
guides the driver using method 2.

[Shift the gear except to P (Park)
while the infotainment system screen
guides the driver using method 2.

[Press the Parking Safety (
) button
or select ‘Cancel’ on the infotainment
system screen.

[Press the Remote Start (
) button
on the smart key while the vehicle is
being controlled by Remote Operation
function. Remote Operation function
will turn off. At this time, the vehicle
will turn off.

[Get on the vehicle with the smart
key. Remote Operation function will
turn off. At this time, the vehicle will
remain on.
The function will pause in the following
conditions when:

[There is a detected pedestrian, animal
or object in the direction the vehicle
is moving

[The door or liftgate is open

[The Forward (
) or Backward ()
button is not continuously pressed

[Simultaneously pressing multiple
buttons on a smart key

[The smart key is not operated within
13 ft. (4 m) from the vehicle

[Button of another smart key is pressed
in addition to the operating smart key

[Blind-Spot Collision-Avoidance
Assist or Rear Cross-Traffic Collision-
Avoidance Assist operates while the
vehicle is being controlled in the
reverse direction.

7-179
07
The function will pause in the
following conditions when:

[Smart Parking
- There is a pedestrian, animal or
object in the direction the vehicle is
moving
- The door or liftgate is open
- The driver’s seat belt is not fastened
- Blind-Spot Collision-Avoidance
Assist or Rear-Cross Traffic Collision
Assist operates while the vehicle
is being controlled in the reverse
direction
- The Parking/View (
) button is
not continuously pressed
- The vehicle is stopped by
depressing the brake pedal

[Remote Smart Parking
- There is a pedestrian, animal or
object in the direction the vehicle is
moving
- The door or liftgate is open
- The Forward (
) or Backward ()
button is not continuously pressed
- Simultaneously pressing multiple
buttons on a smart key
- The smart key is not operated within
13 ft. (4 m) from the vehicle
- Button of another smart key is
pressed in addition to the operating
smart key
- Blind-Spot Collision-Avoidance
Assist or Rear-Cross Traffic Collision
Assist operates while the vehicle
is being controlled in the reverse
direction
When Parking function is paused, the
vehicle will automatically stop. If the
condition that made the function to
pause disappears, the function may
operate again.
The function will cancel in the
following conditions when:

[Smart Parking
- The steering wheel is steered
- The gear is shifted while the vehicle
is moving
- Operating EPB while the vehicle is
moving
- The hood is open
- The driver opens the door with the
seatbelt unfastened
- Rapid acceleration occurs
- Vehicle skid occurs
- The wheel is stuck by an obstacle
and cannot move
- There are pedestrians, animals or
objects at the front and rear of the
vehicle at the same time
- Approximately 3 minutes and 50
seconds have past after Smart
Parking function has started to
operate
- The slope of the road exceeds the
operational range
- The function is paused for more
than 1 minute
- The steering wheel, gearshift,
braking, and drive controls are not
working properly
- ABS, TCS or ESC system operates
due to slippery road conditions
- The charging door is open
When Smart Parking function is
cancelled, the vehicle will automatically
stop, shift the gear to P (Park) and
engage EPB (Electronic Parking Brake).