2023 GENESIS G90 park assist
[x] Cancel search: park assistPage 559 of 676
7-170
Driver Assistance System
5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W
0 D O I X Q F W L R Q D Q G / L P L W D W L R Q V
Remote Smart Parking Assist
malfunction
ORS071281L
5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W F K H F N
When Remote Smart Parking Assist is
not working properly, the ‘Check Parking
Assist’ warning message will appear
on the infotainment system screen.
If the message appears, stop using
Remote Smart Parking Assist, and have
the vehicle inspected by an authorized
retailer of Genesis Branded products.
OJWEV071287L
5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W F D Q F H O H G
When Remote Parking Assist is
operating, the function can be canceled,
and the ‘Parking Assist Canceled’
warning message may appear regardless
of the parking order. Other messages
may appear depending on the situations.
Follow the instructions provided on
the infotainment system screen while
parking your vehicle with Remote
Parking Assist. Always look around and
pay attention when using Remote Smart
Parking Assist.
Page 560 of 676
![GENESIS G90 2023 Owners Manual 7-171
07
OJWEV071288L
5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W V W D Q G E \
‘Parking Assist Conditions Not Met’
message appears when Parking/View
(
) button has been pressed and](/manual-img/46/58825/w960_58825-559.png "GENESIS G90 2023 Owners Manual 7-171
07
OJWEV071288L
5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W V W D Q G E \
‘Parking Assist Conditions Not Met’
message appears when Parking/View
(
) button has been pressed and")
7-171
07
OJWEV071288L
5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W V W D Q G E \
‘Parking Assist Conditions Not Met’
message appears when Parking/View
(
) button has been pressed and held
while Remote Smart Parking Assist is in
standby.
After a while, press and hold the
Parking/View (
) button again to see if
Remote Smart Parking Assist works.
The message appears even when the
smart key's battery is low. Check the
smart key battery level.
Limitations of Remote Smart Parking
Assist
In the following circumstances, Remote
Smart Parking Assist performance to
park or exit the vehicle may be limited,
there may be a risk of collision, or
Remote Smart Parking Assist may turn
off. Park or exit the vehicle manually if
necessary.
[ An object is attached to the steering
wheel
[ The vehicle is installed with a snow
chain, spare tire or different size
wheel
[ Tire pressure is lower or higher than
the standard tire pressure
[ Your vehicle is loaded with cargo
longer or wider than your vehicle or a
trailer is connected to your vehicle [ There is a problem with the wheel
alignment
[ Your vehicle is leaned severely to one
side
[ Your vehicle is equipped with a trailer
hitch
[ The license plate is installed
differently from the original location
[ There is a person, animal or object
above or below the ultrasonic sensor
when Remote Smart Parking Assist is
activated
[ The parking space is narrow or curve
[ There is an obstacle such as a person,
animal or object (trash can, bicycle,
motorcycle, shopping cart, narrow
pillar, etc.) near the parking space
[ There is a circular pillar or narrow
pillar, or a pillar surrounded by objects
such as fire extinguisher, etc., near the
parking space
[ The road surface is bumpy (curbstone,
speed bump, etc.)
[ The road is slippery
[ The parking space is near a vehicle
with higher ground clearance or big,
such as a truck, etc.
[ The parking space is Inclined
Page 561 of 676
7-172
Driver Assistance System
[ The road surface of parking space
with lines is wet due to snow, puddles,
or there is a road marker inside the
parking space
[ The road surface of the parking space
with lines is bumpy due to road cracks
[ The parking line is too thin or thick
[ The parking line is partially erased or
blurred
[ The parking line is obscured by
people, animals, or objects such as
snow, boxes, etc.
[ There is heavy wind
[ Operating Remote Smart Parking
Assist on uneven roads, gravel roads,
bushes, etc.
[ The performance of the ultrasonic
sensor is affected by extremely hot or
cold weather
[ The ultrasonic sensor is covered with
snow or water
[ An object that generates ultrasonic
waves is nearby
[ A wireless device with a transmission
function operates near the ultrasonic
sensors
[ Your vehicle is affected by another
vehicle’s Parking Distance Warning
[ The sensor is mounted or positioned
incorrectly by an impact to the
bumper
[ The cameras is improperly mounted
or out of position due to side view
mirror damage[ The ultrasonic sensor cannot detect
the following objects when:
- Sharp or slim objects, such as ropes,
chains or small poles
- Objects smaller than 40 in. (100 cm)
in length and narrower than 6 in. (14
cm) in diameter
- Objects which tend to absorb
sensor frequency, such as clothes,
spongy material or snow
- A narrow object such as a corner of
a square pillar
- Person, animal or object near the
ultrasonic sensor
[ The cameras may not properly
recognize or may not recognize the
parking line and objects when:
- There are small objects (curb, etc.),
sharp objects, or thin objects (rope,
etc.) around
- People, animals or objects are too
close or too far from the vehicle
- Objects are on a higher position,
such as pickup trucks
- The camera is obscured by dirt or
moisture
- The camera is exposed to bright
light
- The surrounding is too dark
- The light is reflected from the
surface
Page 562 of 676
7-173
07
Remote Smart Parking Assist may not
operate properly under the following
circumstances:
[ Parking on inclines
ORS071020L
Park manually when parking on
inclines.
[ Parking in snow
ORS071033L
Snow may interfere with sensor
operation, or Remote Smart Parking
Assist may cancel if the road is
slippery while parking.[ Parking on uneven road
ORS071021L
Remote Smart Parking Assist may
cancel when the vehicle slips, or
the vehicle cannot move due to
road conditions such as pebbles or
fragmented stones.
[ Parking behind a truck
ORS071022L
Do not use Remote Smart Parking
Assist around vehicles with higher
ground clearance, such as a bus,
truck, etc. It may lead to an accident.
Page 563 of 676
7-174
Driver Assistance System
[ Parking near a pillar
ORS071023L
Remote Smart Parking Assist
performance may reduce or collision
with an obstacle may occur when
there is a narrow object, circular pillar,
square pillar, or a pillar surrounded
by objects such as a fire extinguisher,
etc., near the parking space. The
driver should park the vehicle
properly.
[ Parking next to a misaligned vehicle
ORS072032N
If Remote Smart Parking Assist is used
in a parking space where the vehicle
next to you is parked crooked, your
vehicle can avoid contacting parked
vehicles but may not park side by side.[ Parking diagonal
ORS071034
Remote Operation may not operate
provide properly in a diagonal parking
space.
[ Leaving a parking space near a wall or
parking in a narrow space
ORS071137
- Remote Smart Parking Assist may
not operate properly when leaving
a parking space that is narrow
and near a wall. Always check for
pedestrians, animals, objects while
leaving.
- For your safety, Remote Smart
Parking Assist does not search for
parking spaces at areas with narrow
parking spaces that are narrower
than the minimum space required
for parking.
Page 564 of 676
7-175
07
[ Abnormal parking space
ORS071077
Remote Smart Parking Assist does not
work properly when the parking lines
are not parallel. Do not park even if
the parking space is recognized by the
sensor.
[ Inclined parking space
ORS071078
Remote Smart Parking Assist does not
work properly on a inclined or curved
road surface. Do not park although
the parking space is recognized by the
sensor.
: $ 5 1 , 1 *
Take the following precautions when
X V L Q J 5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W
[ 7 K H G U L Y H U L V U H V S R Q V L E O H I R U V D I H
S D U N L Q J D Q G H [ L W Z K H Q X V L Q J 5 H P R W H
6 P D U W 3 D U N L Q J $ V V L V W
[ : K H Q X V L Q J 5 H P R W H 6 P D U W 3 D U N L Q J
$ V V L V W V W D \ R X W R I W K H Y H K L F O HT V S D W K
I R U \ R X U V D I H W \
[ $ O Z D \ V F K H F N V X U U R X Q G L Q J V Z K H Q
X V L Q J 5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W
< R X P D \ F R O O L G H Z L W K S H G H V W U L D Q V
D Q L P D O V R U R E M H F W V L I W K H \ D U H Q H D U
W K H V H Q V R U R U D U H L Q W K H V H Q V R UT V E O L Q G
V S R W D U H D
[ $ F R O O L V L R Q P D \ R F F X U L I D S H G H V W U L D Q
D Q L P D O R U R E M H F W V X G G H Q O \ D S S H D U V
Z K L O H 5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W L V
R S H U D W L Q J
[ ' R Q R W X V H 5 H P R W H 6 P D U W 3 D U N L Q J
Assist when under the influence of
D O F R K R O
[ Do not let children or other people to
X V H W K H V P D U W N H \
[ , I 5 H P R W H 6 P D U W 3 D U N L Q J $ V V L V W L V
X V H G F R Q W L Q X R X V O \ I R U D O R Q J S H U L R G
L W P D \ D G Y H U V H O \ D I I H F W 5 H P R W H
6 P D U W 3 D U N L Q J $ V V L V W S H U I R U P D Q F H
Page 570 of 676
8-3
08
If You Have a Flat Tire While
Driving
If a tire goes flat while you are driving:
• Take your foot off the accelerator
pedal and let the vehicle slow down
while driving straight ahead. Do not
apply the brakes immediately or
attempt to pull off the road as this
may cause loss of vehicle control
resulting in an accident. When the
vehicle has slowed to such a speed
that it is safe to do so, brake carefully
and pull off the road. Drive off the
road as far as possible and park on
firm, level ground. If you are on a
divided highway, do not park in the
median area between the two traffic
lanes.
• When the vehicle is stopped, press the
hazard warning flasher button, shift
the gear to P (Park), apply the parking
brake, and press the Engine Start/Stop
button to the OFF position.
• Have all passengers get out of the
vehicle. Be sure they all get out on the
side of the vehicle that is away from
traffic.
• When changing a flat tire, follow the
instructions provided later in this
chapter.
IF THE ENGINE WILL NOT
START
• Be sure to shift the gear to N (Neutral)
or P (Park). The engine starts only
when the gear is in N (Neutral) or P
(Park).
• Turn on the interior light. If the light
dims or goes out when you operate
the starter, the battery is drained.
See instructions for “Jump Starting”
provided in this chapter.
• Check the fuel level and add fuel if
necessary.
If the vehicle still does not start, call an
authorized retailer of Genesis Branded
products for assistance.
NOTICE
Push or pull starting the vehicle may
cause the catalytic converter to
overload which can lead to damage to
the emission control system.
008_RS4_HMA.indd 8-32022-04-18 3:48:05
Page 572 of 676
8-5
08
Jump Starting Procedure
Information
Your vehicle has a battery in the luggage
compartment, but when you jump start
your vehicle, use the jumper terminal in
the engine compartment.
1. Position the vehicles close enough
that the jumper cables will reach, but
do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the
engine compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such as
radios, lights, air conditioning, etc.
Put the vehicles in P (Park) and set the
parking brake. Turn both vehicles OFF.
4. Open the engine hood.
ORS081020ORS081020
A : Negative (-) Terminal,
B : Positive (+) Terminal
5. Remove the engine compartment fuse
box cover.
CAUTION
Before jump starting, make sure to
correctly identify the positive (+) and
negative (-) terminals to avoid reverse
polarity connections.
ORS082003NORS082003N
6. Connect the jumper cables in
the exact sequence shown in the
illustration. First connect one jumper
cable to the red, positive (+) jumper
terminal of your vehicle M.
7. Connect the other end of the jumper
cable to the red, positive (+) battery/
jumper terminal of the assisting
vehicle N.
8. Connect the second jumper cable to
the black, negative (-) battery/jumper
terminal of the assisting vehicle O.
9. Connect the other end of the second
jumper cable to the black, negative (-)
chassis ground of your vehicle P.
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over the
battery when making connections.
WARNING
Do not connect the jumper cable to
the negative (-) jumper terminal of the
discharged battery. A spark could cause
the battery to explode and lead to a
personal injury or vehicle damage.
008_RS4_HMA.indd 8-52022-04-18 3:48:05