2023 FORD SUPER DUTY tires

[x] Cancel search: tires

Page 510 of 738

FORD SUPER DUTY 2023  Owners Manual To restore the full function of the trailertire pressure monitoring system:
•Have the damaged wheel and tireassembly repaired and remounted toyour trailer.
•Install the trailer tire pressuremonito

Page 511 of 738

FORD SUPER DUTY 2023  Owners Manual Action RequiredPossible CauseWarning Lamp
After inflating your tires to the manufac-turer’s recommended pressure as shownon the tire label, on the edge of driverdoor or the B-pillar, drive your vehi

Page 512 of 738

FORD SUPER DUTY 2023  Owners Manual TIRE PRESSURE MONITORING SYSTEM – INFORMATION MESSAGES
ActionMessage
After inflating your tires to the manufacturer’s recommendedpressure as shown on the Tire Label, on the edge of the driverdoor

Page 513 of 738

FORD SUPER DUTY 2023  Owners Manual CHANGING A FLAT TIRE
If you get a flat tire when driving, do notapply the brake heavily. Instead, graduallydecrease your speed. Hold the steeringwheel firmly and slowly move to a safeplace on the side

Page 596 of 738

FORD SUPER DUTY 2023  Owners Manual We strongly recommend only using ourgenuine or our authorized re-manufacturedreplacement parts engineered for yourvehicle.
Additives and Chemicals
We do not recommend using chemicals oradditives not a

Page 597 of 738

FORD SUPER DUTY 2023  Owners Manual Check Every Six Months
The door weatherstrips for wear. Lubricate if necessary.
The hinges, latches and outside locks for proper operation. Lubricate if necessary.
The parking brake for proper operati

Page 599 of 738

FORD SUPER DUTY 2023  Owners Manual If your instrument cluster display resetsprematurely or becomes inoperative, youshould perform the oil change interval atsix months or 5,000 mi (8,000 km) fromyour last oil change. Never exceed one ye

Page 601 of 738

FORD SUPER DUTY 2023  Owners Manual Multi-Point Inspection
Suspension components for leaks ordamageExhaust system
Steering and linkageExterior lamps operation
Tires including the spare for wear and
proper pressure2Fluid levels1; fill if