2022 VOLKSWAGEN ID.5 window

WARNING
Poor visibility through the door windows,
windscreen and rear window increases the
risk of collisions and accidents which can
cause serious injuries.
x Keep all door windows, the windscreen
and the rear window free from ice, snow
and condensation to maintain perf
ect
visibility.
x Adjust the heating, air conditioning and
rear window heating to prevent conden-
sation from forming on the windows.
x Only set off once all windows are clear.
x Use air recirculation mode for a short
period only. Condensation could other-
wise form very quickly on the windows,
greatly reducing visibility.
x Switch off the air recirculation mode
when it is no longer required. NOTICE
Food, medicine and other items that are sen-
sitiv
e to heat or cold could be either dam-
aged or rendered useless by the air flowing
out of the vents.
x Never leave food, medicines or other tem-
perature-sensitive objects in front of the
vents. NOTICE
If the air conditioning system is not working,
switch the air conditioning system off imme-
diately and ha

ve it checked by a qualified
workshop. This can help to prevent secondary
damage. Overview of functions
Please refer to and at the start of
the chapter on page 120.
Some functions of the air conditioning sys-
tem and menus in the Inf

otainment system as well as an air conditioning block for the
rear seats depend on the equipment le

vel.
In the Infotainment system Open the air conditioning settings in
the Infotainment system.
In the Infotainment system: upper screen
edge
Switch the air conditioning system on
and off.
In the Infotainment system: lower screen
edge Select temperature. Depending on the
equipment level, you can set the tem-
perature directly in the Infotainment
system or use the touch sliders be-
neath the Infotainment system. The
selected temperatures are displayed
at the bottom of the screen in the In-
fotainment system.
The temperatures set for the rear row
of seats are shown on the displays for
the air conditioning block for the rear
seats. Adopt temperature settings of driver
side f
or all seats. Switch the seat heating on and off

If REAR LOCK is active in the Infotainment
system, the rear air conditioning block
cannot be operated. NOTICE
Do not apply stickers over the heating ele-
ments from the inside to pre
vent damage to
the rear window heating. Air recirculation mode
Please refer to and at the start of
the chapter on page 120.
When air recirculation mode is switched on,
no fresh air enters the v

ehicle interior.
Switching manual air recirculation mode on
and off
1. Touch on the Infotainment system.
2.

Touch in the Infotainment system.
Automatic air recirculation mode of Clima-
tronic
Automatic air recirculation mode supports
you within the system limits by temporarily
switching the fresh air supply on or off if the
fresh air entering the v

ehicle is of poor quali-
ty. The system cannot detect unpleasant
odours.
1. Touch on the Infotainment system.
2.

Switch automatic air recirculation mode
on or off with
Automatic air recirculation. to prevent the vehicle occupants becoming
tired.
1.

Touch on the Infotainment system.
2.

Switch the Air Care function on or off via
Active.
When does air recirculation mode switch off?
Air recirculation mode switches off in the fol-
lowing situations

Practical equipment
Stowage areas Introduction to the topic
WARNING
Loose objects may be flung through the ve-
hicle interior in the e vent of a sudden driv-
ing or braking manoeuvre. This can cause
serious injury and can also lead to loss of
control of the vehicle.
x Stow objects only in closed stowage
compartments.
x Always keep stowage compartments
closed while the vehicle is in motion.
x The coat hooks in the vehicle should on-
ly be used for lightweight clothing
weighing max. 2.5 kg (approx. 5.5 lbs).
Never leave any heavy, hard or sharp ob-
jects in the pockets. NOTICE
x Do not stow any temperature-sensitiv
e
objects, food or medicines inside the vehi-
cle. Hot and cold temperatures could dam-
age them or render them unusable.
x Objects stored in the vehicle that are
made from transparent materials, such as
transparent suction cups on the windows,
can concentrate the sun

2. To enlarge the display of images and
maps, slowly mo ve your fingers apart.
OR: to reduce the display of images and
maps, slowly move your fingers togeth-
er. Personalising the Infotain-
ment system
Please refer to and on page 218.
Depending on equipment, you can per-
sonalise the Inf

otainment system to per-
mit faster access to favourite or fre-
quently used functions.
Configuring tiles
You can find tiles for accessing further menus
and functions on the Infotainment system
displays. Configure the tiles by removing or
adding views.
Tiles with additional functions can be found
in the Infotainment system as from the sec-
ond view. You can configure these tiles.
1. Touch the tile and keep your finger on the screen until an additional window
opens.
2. Touch to open the configuration func-
tion.

formation, to enable you to enter destina-
tions quickly and to optimise route guidance.
Deleting stored data
Basic functions Delete usage pattern.
2. Touch confirmation to delete. Navigation equipment and
symbols
Please refer to and on page 218 and
at the start of the chapter on page 238.
Na
vigation
The navigation functions depend on the
equipment level and country.
The function buttons and displays depend on
the settings and the current driving situation.
Equipment Display current position.
Align the map to north.
Display additional window with route
options.
Align the map to the direction of
tra

vel (position, zoom and angle).
Display additional window with fur-
ther options. Map scale.
Display information on the route.
Symbols in the additional window

ites, and home and work addresses so it can
use this data f
or route guidance.
Selecting a destination and starting naviga-
tion
Suggested.
2. Touch the desired destination.
Route guidance starts automatically.
Last destinations
The navigation system stores up to 25 desti-
nations that you have driven to last in order
to make them available for route guidance.
A new destination automatically overwrites
the oldest destination.
Selecting a destination and starting naviga-
tion
Last destinations.
2. Touch the desired destination.
3. Touch
Start.
OR: touch .
Quick start
Last destinations.
2. Touch the desired destination and hold for a few seconds.
Favourite destinations
Save up to 50 destinations as favourites.
Saving a destination as a favourite in
the additional window.
Selecting a destination and starting na

viga-
tion
Favourites.
2. Touch the desired destination.
3. Touch
Start.
OR: touch .
Quick start
Favourites.2. Touch the desired destination and hold
f
or a few seconds.
Selecting on the map
The navigation map contains active areas at
many locations which are suitable for desti-
nation input. To enter a destination, touch
the desired position or location on the map.
You can start route guidance if map data is
available at this location.
Destination input via the navigation map de-
pends on the data status and is not possible
for all positions.
Use the “offroad navigation” function to en-
ter a destination point with unknown data.
Offroad navigation
The “offroad navigation” function calculates
routes to selected destination points with
unknown data. If a destination point is not on
known roads or there is no positioning data
available for this point, the navigation system
will calculate the route up to the nearest
point on the known roads and then complete
the route up to the destination point by a di-
rect connection.
To start “offroad navigation”, touch a free
area without positioning data.
Starting navigation .
2.

Move the map view until the desired po-
sition can be selected. The navigation
map can be operated by extended touch
gestures

x
Accelerate carefully and gently.
x A
void sudden braking and driving ma-
noeuvres.
x Brake earlier than in normal driving. NOTICE
Rubbing objects on the rear windows can
cause damage, e.g. to the heating wires of
the rear window heating. Luggage compartment
co

ver .
Remo

ving the luggage compartment cover

Fig. 158
Changing the wiper blade f or the rear
window.
The factory-fitted windscreen wiper blades
are coated with graphite. The graphite coat-
ing ensures that the wiper blade moves qui-
etly over the window. If the graphite coating
is damaged, the wiper will become louder.
Check the condition of the wiper blades on
a regular basis. Rubbing wiper blades should
be changed if damaged or cleaned if dirty