107
2 2-2. Charging
Plug-in hybrid system
*: Flashes for a certain period of time, and then turns off.
QCharging indicator of the charging port
When a system malfunction occurs while charging or using the Remote Air Condi-
tioning System, the charging indicator rapidly flashes for a certain period of time, and
then turns off.
If this occurs, when a door is opened with the power switch off, a message is dis-
played on the multi-information display. When a message is displayed, follow the
instructions displayed on the screen.
Illumination/flashing patternVehicle condition
Illuminated
Charging is in progress
Charging is possible
“Battery Heater” (P.127) is operating
“Battery Cooler” (P.128) is operating
Flashing (normally)*When charging schedule is registered (P.143) and
AC charging cable is connected to vehicle
Rapidly flashing*When charging cannot be carried out due to malfunc-
tion in a power source or the vehicle etc. (P.157)
Not illuminated
Charging connector is not inserted into AC
charging inlet
When the charging schedule (P.143) is on
standby
When charging is completed
321
5
5-5. Using the driving support systems
Driving
QLane departure alert function
When the system determines that
the vehicle might depart from its
lane or course*, a warning is dis-
played on the multi-information dis-
play, and either a warning buzzer
will sound or the steering wheel will
vibrate to alert the driver.
When the warning buzzer sounds or
WARNING
OThe vehicle is driven in an area without white (yellow) lines, such as
in front of a tollgate or checkpoint, or at an intersection, etc.
OThe white (yellow) lines are cracked, “Raised pavement marker” or stones are present.
OThe white (yellow) lines cannot be seen or are difficult to see due to
sand, etc.
OThe vehicle is driven on a road sur-
face that is wet due to rain, pud- dles, etc.
OThe traffic lines are yellow (which may be more difficult to recognize than lines that are white).
OThe white (yellow) lines cross over a curb, etc.
OThe vehicle is driven on a bright surface, such as concrete.
OIf the edge of the road is not clear or straight.
OThe vehicle is driven on a surface that is bright due to reflected light,
etc.
OThe vehicle is driven in an area
where the brightness changes sud- denly, such as at the entrances and exits of tunnels, etc.
OLight from the headlights of an oncoming vehicle, the sun, etc.
enters the camera.
OThe vehicle is driven on a slope.
OThe vehicle is driven on a road which tilts left or right, or a winding
road.
OThe vehicle is driven on an
unpaved or rough road.
OThe traffic lane is excessively nar-
row or wide.
OThe vehicle is extremely tilted due to carrying heavy luggage or having improper tire pressure.
OThe distance to the preceding vehi-cle is extremely short.
OThe vehicle is moving up and down a large amount due to road condi-
tions during driving (poor roads or road seams).
OWhen driving in a tunnel or at night with the headlights off or when a headlight is dim due to its lens
being dirty or it being misaligned.
OThe vehicle is struck by a cross-
wind.
OThe vehicle is affected by wind from
a vehicle driven in a nearby lane.
OThe vehicle has just changed lanes
or crossed an intersection.
OTires which differ by structure, man-
ufacturer, brand or tread pattern are used.
OWhen tires of a size other than specified are installed.
OSnow tires, etc. are equipped.
OThe vehicle is being driven at
extremely high speeds.
Functions included in LTA
system
