2022 TOYOTA GR86 remote start

81
1
1-4. Theft deterrent system
For safety and security
*: If equipped
■Items to check before locking
the vehicle
To prevent unexpected triggering of
the alarm and vehicle theft, make
sure of the following:
 Nobody is in the vehicle.
 The windows are closed before
the alarm is set.
 No valuables or other personal
items are left in the vehicle.
■Setting
Close the doors and trunk, and lock
both side doors using the entry
function or wireless remote control.
The system will se t automatically
after 30 seconds.
The indicator light changes from being
on to flashing when the system is set.
■Canceling or stopping
Do one of the following to deacti-
vate or stop the alarms:
 Unlock the doors or open the
trunk using the entry function or
wireless remote control.
 Turn the engine switch to ACC or
ON, or start the engine.
1 Check that both side doors and
the trunk are closed.
2 Turn the engine switch to ON.
3 Open the driver’s door while
pressing and holding on the
door lock switch and continue to
press for approximately 10
seconds after the driver’s door
has opened.
The alarm system changes between
Alarm*
The alarm uses light and
sound to give an alert when an
intrusion is detected.
The alarm is triggered when a
locked door or the trunk is
unlocked or opened in any way
other than using the entry
function or wireless remote
control while the alarm is set.
Setting/canceling/stopping
the alarm system
Activating/deactivating the
alarm system

1003-1. Key information
3-1.Key information
The following keys are provided
with the vehicle.
Electronic keys
• Operating the smart entry & start sys-
tem ( P.109)
• Operating the wireless remote control
function ( P.101)
Mechanical keys
Key number plate
■When riding in an aircraft
When bringing an electronic key onto an
aircraft, make sure you do not press any
buttons on the electronic key while inside the aircraft cabin. If you are carry-
ing an electronic key in your bag etc.,
ensure that the buttons are not likely to be pressed accidentally. Pressing a but-
ton may cause the electronic key to emit
radio waves that could interfere with the operation of the aircraft.
■Electronic key battery depletion
●The standard battery life is 1 to 2 years.
●If the battery becomes low, an alarm
will sound in the cabin and a message will be shown on the multi-information
display when the engine is stopped.
●To reduce key battery depletion when
the electronic key is to not be used for
long periods of time, set the electronic key to the battery-saving mode.
( P. 111 )
●As the electronic key always receives
radio waves, the battery will become
depleted even if the electronic key is not used. The following symptoms
indicate that the electronic key battery
may be depleted. Replace the battery when necessary. ( P.316)
• The smart entry & start system or the
wireless remote control does not oper- ate.
• The detection area becomes smaller.
• The LED indicator on the key surface does not turn on.
●To avoid serious deterioration, do not leave the electronic key within 1 m (3
ft.) of the following electrical appli-
ances that produce a magnetic field: •TVs
• Personal computers
• Cellular phones, cordless phones and battery chargers
• Recharging cellular phones or cord-
less phones • Table lamps
• Induction cookers
■Replacing the battery
 P. 3 1 6
■Confirmation of the registered key number
The number of keys already registered
to the vehicle can be confirmed. Ask any authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer for details.
Keys
The keys
A
C
NOTICE
■To prevent key damage
●Do not drop the keys, subject them
to strong shocks or bend them.
●Do not expose the keys to high
temperatures for long periods of
time.

101
3
3-1. Key information
Before driving
The electronic keys are equipped
with the following wireless remote
control:
Locks the doors ( P.103)
Closes the windows* ( P.103)
Unlocks the doors ( P.103)
Opens the windows* ( P.103)
Opens the trunk ( P.108)
*: These settings must be customized
at any authorized Toyota retailer or
Toyota authorized repairer, or any
reliable repairer.
To take out the mechanical key,
push the release button and take
the key out.
The mechanical key can only be
inserted in one direction, as the key
only has grooves on one side. If the key
cannot be inserted in a lock cylinder,
turn it over and re-attempt to insert it.
After using the mechanical key, store it
in the electronic key. Carry the mechan-
ical key together with the electronic key.
If the electronic key battery is depleted
or the entry function does not operate
properly, you will need the mechanical
key. ( P.357)
NOTICE
●Do not get the keys wet or wash
them in an ultrasonic washer etc.
●Do not attach metallic or magnetic
materials to the keys or place the
keys close to such materials.
●Do not disassemble the keys.
●Do not attach a sticker or anything else to the surface of the electronic
key.
●Do not place the keys near objects
that produce magnetic fields, such
as TVs, audio systems and induc- tion cookers.
■Carrying the electronic key on your person
Carry the electronic key 10 cm (3.9
in.) or more away from electric appli- ances that are turned on. Radio
waves emitted from electric appli-
ances within 10 cm (3.9 in.) of the electronic key may interfere with the
key, causing the key to not function
properly.
■In case of a smart entry & start
system malfunction or other key-related problems
P. 3 5 7
■When an electronic key is lost
P. 3 5 6
Wireless remote control
Using the mechanical key
A
C
D

103
3
3-2. Opening, closing and locking the doors and trunk
Before driving
3-2.Opening, closing and locking the doors and trunk
■Smart entry & start system
Carry the electronic key to enable
this function.
1 Grip the door handle to unlock
the doors.
Vehicles with a double locking system:
Grip the driver’s door handle to unlock
the door. Grip the passenger’s door
handle to unlock both side doors.*
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.
*: The door unlock settings can be
changed.
2 Touch the lock sensor (indenta-
tion on the side of the door han-
dle) to lock the doors.
Check that the door is securely locked.
■Wireless remote control
1 Locks driver’s door*1
Locks both side doors*2
Check that the door is securely locked.
Press and hold to close the windows.*3
2 Unlocks both side door*1
Unlocks both side doors*2
Pressing the button unlocks the driver’s
door. Pressing the button again within 3
seconds unlocks the other doors.*2
Press and hold to open the windows.*3
*1: Vehicles without a double locking
system
*2: Vehicles with a double locking sys-
tem
*3: These settings must be customized
at any authorized Toyota retailer or
Toyota authorized repairer, or any
reliable repairer.
■Side window open/close function linked to door operation
In order to make opening and closing
the doors easier, completely closed win- dows are linked to door operations.
Therefore, when a door is opened, its
window opens slightly. When a door is closed, its window closes completely.
However, if the batt ery has discharged
or is disconnected, this function will not operate. ( P.362)
Doors
Unlocking and locking the
doors from the outside

1043-2. Opening, closing and locking the doors and trunk
■Operation signals
The emergency flashers flash to indicate that the doors have been
locked/unlocked. (Locked: once;
Unlocked: twice)
■Security feature ( vehicles without a double locking system)
If a door is not opened within approxi-
mately 30 seconds after the vehicle is unlocked using the entry function or
wireless remote contro l, the security fea-
ture automatically locks the vehicle again.
■When the door cannot be locked by
the lock sensor on the surface of
the door handle
If the doors cannot be locked by touch-
ing the lock sensor with a finger, touch
the lock sensor with the palm of your hand.
If you are wearing gloves, remove them.
■Door lock buzzer
If an attempt to lock the doors using the
entry function or wireless remote control is made when a door is not fully closed,
a buzzer will sound continuously for 5
seconds. Fully close the door to stop the buzzer, and lock the doors again.
■Alarm (if equipped)
Locking the doors will set the alarm sys-
tem. ( P. 8 1 )
■Conditions affecting the operation
of the smart entry & start system or wireless remote control
 P. 111
■If the smart entry & start system or
the wireless remote control does not operate properly
Use the mechanical key and/or inside
lock buttons to lock and unlock the doors. ( P.357)
Replace the key battery with a new one
if it is depleted. ( P.316)
■If the battery is discharged
The doors cannot be locked and
unlocked using the smart entry & start
system or wireless remote control. Lock or unlock the doors using the mechani-
cal key. ( P.357)
■Customization
Some functions can be customized. ( P.377)
WA R N I N G
■To prevent an accident
Ensure that both side doors are prop-
erly closed while driving the vehicle. Failure to do so may result in a door
opening and an occupant being
thrown out of the vehicle, resulting in death or serious injury.
■When opening or closing a door
Check the surroundings of the vehicle
such as whether the vehicle is on an
incline, whether there is enough space for a door to open and whether
a strong wind is blowing. When open-
ing or closing the door, hold the door handle tightly to prepare for any
unpredictable movement.
■Side window open/close function
linked to door operation
Do not hold the upper edge of the side window when you close the door.
Otherwise, your fingers or hand may
be caught in the window.

1083-2. Opening, closing and locking the doors and trunk
■Smart entry & start system
While carrying the electronic key,
press the button on the trunk lid.
When all of the doors are unlocked,
the trunk lid can be opened while
not carrying an electronic key. How-
ever, as the doors will be locked
when the vehicle is driven (at a
vehicle speed of 5 km/h [3 mph] or
more), the trunk will not be able to
be opened until a door is opened.
■Wireless remote control
Press and hold the switch.
■Trunk light
The trunk light turns on when the trunk
is opened.
■Function to prevent the trunk being
locked with the electronic key inside
●When both side doors are locked, closing the trunk lid with the electronic
key left inside the trunk will sound an
alarm. In this case, the trunk lid can be
opened by pressing the trunk release
button on the trunk lid.
●If the spare electronic key is put in the
trunk with both side doors locked, the key confinement prevention function
is activated so the trunk can be
opened. In order to prevent theft, take all electronic keys with you when leav-
ing the vehicle.
●If the electronic key is put in the trunk
with both side doors locked, the key
may not be detected depending on the location of the key and the sur-
rounding radio wave conditions. In this
case, the key confinement prevention function cannot be activated, causing
the doors to lock when the trunk is
closed. Make sure to check where the
key is before closing the trunk.
●The key confinement prevention func-
tion cannot be activated if either door is unlocked. In this case, open the
trunk using the trunk opener.

109
3
3-2. Opening, closing and locking the doors and trunk
Before driving
■If the smart entry & start system or
the wireless remote control does not operate properly
Replace the key battery with a new one
if it is depleted. ( P.316)
■Customization
Some functions can be customized.
( P.377)
■Antenna location
Antennas outside the cabin
Antennas inside the cabin
Antenna outside the trunk
Antenna inside the trunk
Smar t entr y & start sys-
tem
The following operations can
be performed simply by carry-
ing the electronic key on your
person, for example in your
pocket. The driver should
always carry the electronic
key.
 Locks and unlocks the doors
( P.103)
 Opens the trunk (P. 1 0 8 )
 Starts the engine (P.139)
A
C
D

111
3
3-2. Opening, closing and locking the doors and trunk
Before driving
• The smart entry & start system has
not been used for 5 days or longer.
●If the smart entry & start system has
not been used for 14 days or longer, the doors cannot be unlocked at the
passenger door. In this case, take
hold of the driver’s door handle, or use the wireless remote control or
mechanical key, to unlock the doors.
■Electronic Key Battery-Saving
Function
When battery-saving mode is set, bat-
tery depletion is minimized by stopping
the electronic key from receiving radio waves.
Press twice while pressing and
holding . Confirm that the electronic
key indicator flashes 4 times.
While the battery-saving mode is set,
the smart entry & start system cannot be
used. To cancel the function, press any
of the electronic key buttons.
■Conditions affecting operation
The smart entry & start system uses
weak radio waves. In the following situa- tions, the communication between the
electronic key and the vehicle may be
affected, preventing the smart entry &
start system, wireless remote control and engine immobilizer system from
operating properly. (Ways of coping:
 P.357)
●When the electronic key battery is
depleted
●Near a TV tower, electric power plant,
gas station, radio station, large dis- play, airport or other facility that gen-
erates strong radio waves or electrical
noise
●When carrying a portable radio, cellu-
lar phone, cordless phone or other
wireless communication device
●When the electronic key is in contact
with, or is covered by the following metallic objects
• Cards to which aluminum foil is
attached • Cigarette boxes that have aluminum
foil inside
• Metallic wallets or bags •Coins
• Hand warmers made of metal
• Media such as CDs and DVDs
●When other wirele ss keys (that emit
radio waves) are being used nearby
●When carrying the electronic key
together with the following devices that emit radio waves
• Another vehicle’s electronic key or a
wireless key that emits radio waves • Personal computers or personal digi-
tal assistants (PDAs)
• Digital audio players • Portable game systems
●If window tint with a metallic content or metallic objects are attached to the
rear window
●When the electronic key is placed
near a battery charger or electronic
devices
■Note for the entry function
●Even when the electronic key is within
the effective range (detection areas), the system may not operate properly
in the following cases:
• The electronic key is too close to the window or outside door handle, near
the ground, or in a high place when
the doors are locked or unlocked.
• The electronic key is near the ground or in a high place, or too close to the
rear bumper center when the trunk is
unlocked. • The electronic key is on the instru-
ment panel, rear package tray or floor,
or in the door pockets or glove box when the engine is started or engine