2022 TOYOTA GR86 buttons

182-1. Basic information before operation
changed, depending on the language,
in rare cases te xt may not be dis- played correctly.
The list screen can be scrolled by a
swipe gesture.
For details on the operation: P. 1 5
Select to skip to the next or pre-
vious page.
This indicates the displayed
screen’s position.
Faster scrolling is possible by
dragging the position indicator.
Some lists contain character
screen buttons which allow
users to jump directly to list
entries that begin with the same
letter as the character screen
button.
Every time the same character
screen button is selected, the
list starting with the subsequent
character is displayed.
The brightness of the screen can
be adjusted.
Refer to the “OWNER'S MANUAL”
for details.
List screen
A
B
C
Screen adjustment
Adjusting brightness

59
5
5-2. Apple CarPlay
Apps
5-2.Apple CarPlay
●Use an undamaged genuine USB
cable when using this function.
●Enable Apple CarPlay in the Apple CarPlay device’s restriction settings
before using this function.
1 Connect an Apple CarPlay
device to the USB port. ( P. 1 9 )
2 Check the confirmation mes-
sage, and then select “Yes”.
 The Apple CarPlay screen will be
displayed.
 If “Don’t show again.” is selected,
the confirmation message will
not be displayed again.
Select “Apple Ca rPlay” on the
home screen or the apps screen
( P.8, 9) to display the Apple
CarPlay screen.
Displays the application buttons.
Select to start the application.
Select to change the home
screen of Apple CarPlay.
*: The displayed screen will differ
depending on the connected Apple
CarPlay device.
■About the supported devices
This system compatible with iOS
13.2 or later are supported.
Whether a registered device con-
nects as an Apple CarPlay device
or an iPod/iPhone can be set.
This setting can be changed only if
“Don’t show again.” was selected
Apple CarPlay
Apple CarPlay can be used to
view Apple Maps, play music,
and place calls by connecting
an Apple CarPlay device to the
system. Supported applica-
tions can also be run.
 For details on the services or
the operations, check the
Apple CarPlay site
(https://www.apple.com/ios/
carplay/).
To use the Apple CarPlay appli-
cation, connect an Apple
CarPlay device to the USB
port.
When using the application,
read the precautions indicated
in “Before using applica-
tions”. ( P. 5 6 )
Connecting the Apple
CarPlay device
Overview
Control screen*
Selecting device to connect
to Apple CarPlay
A
B

61
5
5-3. Android Auto
Apps
5-3.Android Auto
●Use an undamaged genuine USB
cable when using this function.
●To use this function, check to make
sure that your Android device is set to accept connection with a new vehicle.
●Depending on the model, the talkback volume of the voice recognition func-
tion of Android Auto may differ from
the volume setting of other functions. Set the volume to a level that is easy
to hear.
1 Connect an Android Auto device
to the USB port. ( P. 1 9 )
2 Check the confirmation mes-
sage, and then select “Yes”.
 The Android Auto screen will be
displayed.
 If “Don’t show again.” is selected,
the confirmation message will
not be displayed again.
Select “Android Auto” on the home
screen or the apps screen ( P. 8 ,
9) to display the Android Auto
screen.
Displays the application buttons.
Select to start the application.
■About the supported devices
This system compatible with
Android 8.1 or later are supported.
Android Auto
Android Auto can be used to
view Google Maps, play music,
and place calls by connecting
your Android device to the
system, using USB cable and
Bluetooth®. Supported appli-
cations can also be used.
 For details on the services or
the operations, check the
Android Auto site
(https://www.android.com/
auto/) and
(https://support.google.com/
androidauto/).
To use the Android Auto appli-
cation, connect your Android
device to the USB port.
When using the application,
read the precautions indicated
in “Before using applica-
tions”. ( P. 5 6 )
Connecting the Android
Auto device
Overview
Control screen
A

646-1. Basic operation
6-1.Basic operation
“VOLUME” knob: Press and hold
until a message is displayed, and
then select “OK” or wait a few
seconds for the audio/visual sys-
tem to turn off. Press and hold to
turn the system on again. The
system will turn on with the last
audio source used. Turn this
knob to adjust the volume. Press
to mute the audio/visual system.
 button: Press to display
screen buttons for the radio.
●The audio/visual system will remain off if you change the position of
engine switch Off to ACC/ON while
the audio/visual system is off. If you had set the volume to mute, the
audio/visual system will remain mute
and the track will start playing from where it was last stopped.
1 Press the button and select
the “Media”, or press the
button.
2 Select the desired audio source.
Media screen
Radio screen
 Each time button is
pressed, the radio modes can
also be changed.
Some basics
This section describes some of
the basic features of the
audio/visual system. Some
information may not pertain to
your system.
Your audio/visual system
works when the engine switch
is changed to ACC or ON.
NOTICE
●To prevent the 12-volt battery from
being discharged, do not leave the
audio/visual system on longer than necessary when the engine is not
running.
Turning the system on and
off
Selecting an audio source

686-2. Radio operation
stations.
●The radio automatically changes to
stereo reception when a stereo broad-
cast is received.
Stations can be registered as pre-
sets.
1 Tune to the desired station.
2 Select and hold one of the
desired preset station buttons.
 To change the preset station to a
different one, follow the same
procedure.
A station list can be displayed.
1 Select “Station List”.
 “Update”: Select to update the
station list.
FM only
2 Select the desired list.
 “All”: Select to display all sta-
tions.
 “Genres”: Select to display cate-
gories.
3 Select the desired station.
The station of a selected PTY (Pro-
gramme Type) can be seeked.
1 Select “PTY Select”.
2 Select the desired PTY.
3 Select “Seek”.
*: This function is not available in some
countries/areas.
This function allows your radio to
receive station and programme
information from radio stations
which broadcast this information.
Depending on the availability of
RDS infrastructure, this function
may not operate properly.
■TA (Traffic Announcement)
function
A pop-up screen is displayed on the
screen and a traffic announcement
is played when, a traffic announce-
ment is received.
●This function can be turned on/off.
( P. 3 7 )
■AF (Alternative Frequency)
function
A station providing good reception
is automatically se lected if current
reception worsens.
●This function can be turned on/off. ( P. 3 7 )
■Emergency announcement
A pop-up screen is displayed on the
screen and an emergency
announcement is played when an
emergency alarm is received.
Registering a station as a
preset
Selecting a station from the
list
PTY select function
Radio data system*

69
6
6-2. Radio operation
Audio
■News announcement
A pop-up screen is displayed on the
screen and a news announcement
is played when, a news announce-
ment is received.
●This function can be turned on/off.
( P. 3 7 )
*: Use of this function may not be possi-
ble depending on country and vehi-
cle.
DAB operation screen can be
accessed by selecting “DAB” on the
radio control screen. ( P. 6 4 )
Select to change radio modes.
Select to display the sound cus-
tomisation screen. ( P. 6 5 )
Select to display dynamic infor-
mation.
Select to display the radio set-
ting screen. ( P.37)
Select to change the service
component and begin scan-
ning. The scanning operation
will be performed every 10 sec-
onds continuously.
Select again to stop at a
received service component.
Select to display the time shift
operation buttons. ( P. 7 1 )
DAB*
Overview
Control screen
A
B
C
D
E
F

706-2. Radio operation
Select to display a list of receiv-
able stations. ( P. 7 0 )
Select to displa y the PTY select
screen. ( P. 7 1 )
Select to change the preset sta-
tion list.
When “Seek” has been selected
for the “Tuning Method”: Select
and hold to search for receiva-
ble service components.
When “Manual Tune” has been
selected for the “Tuning
Method”: Select and hold to tune
to the next service component.
Select to tune to preset ser-
vices.
Turn to adjust the volume.
Press to mute the audio/visual
system.
Press and hold to turn the
audio/visual system off, and
press and hold to turn it on
again.
Turn to step up/down services.
Press and hold to display the
sound customisation screen.
( P. 6 5 )
Press to seek up/down available
ensembles.
Services can be registered as pre-
sets.
1 Tune to the desired service.
2 Select and hold one of the
desired preset station buttons.
 To change the preset service to a
different one, follow the same
procedure.
A service/component list can be
displayed.
1 Select “Station List”.
2 Select the desired item.
 “All”: Select to display all ensem-
bles.
 “Genres”: Select to display cate-
gories.
 “Update”: Select to update the
station list.
3 Select the desired service/ser-
vice component.
Control panel
G
H
I
J
K
A
B
Registering a service as a
preset
Selecting a service/service
component from the list
C

116Alphabetical Index
Alphabetical Index
A
Add Shortcut button (Home screen)9
AM radio .......................................... 67
Android Auto............................. 61, 80
Apple CarPlay ................................. 59
APPS button ..................................... 8
Apps button (Home screen) ............ 9
Audio
Audio source ................................ 64
Operating information .................. 83
Some basics ................................ 64
Sound settings ............................. 65
Turning the system on and off...... 64
Voice recognition system ............. 66
Audio source .................................. 64
AUX .................................................. 79
B
Before using applications.............. 56
Bluetooth® audio ............................ 76
Bluetooth® phone message function
....................................................... 50
Bluetooth® settings ........................ 24
Buttons overview ............................. 8
C
Call screen operation ..................... 49
Calling methods on the Bluetooth®
phone ............................................ 46
Calling on the Bluetooth® phone .. 46
By contacts list ............................. 47
By favourites list ........................... 47
By keypad .................................... 47
By recent calls list ........................ 46
Car settings (Setting s screen)....... 11
Car Settings button (Home screen)
....................................................... 10
Command list .................................. 91
E
Entering letters and numbers/list
screen operation .......................... 17
Entering letters and numbers ....... 17
List screen .................................... 18
F
FM radio ........................................... 67
G
General settings.............................. 29
General settings (Settings screen) 11
H
HOME button ............................... 8, 16
Home screen ............................... 9, 16
Home screen operation .................. 9
I
Initial screen .................................... 14
Caution screen ............................. 14
Maintenance information .............. 14
Restarting the syst em .................. 14
iPod/iPhone ..................................... 74
M
Maintenance button (Home screen) 9
Media button (Home screen) ...........9
Microphone ..................................... 44
P
Phone
Phone screen ............................... 42
Phone screen operation ............... 42
Registering/Connecting a
Bluetooth® phone....................... 44
Some basics................................. 43
PHONE button ................................... 8
Phone button (Home screen)...........9