2022 TOYOTA GR86 remote control

105
3
3-2. Opening, closing and locking the doors and trunk
Before driving
■Door lock switches (to
lock/unlock)
1 Locks both side doors
2 Unlocks both side doors
■Inside lock buttons (to
lock/unlock)
1 Locks the door
2 Unlocks the door
■Locking the doors from the outside without a key
1 Move the inside lock button to the
lock position.
2 Close the door while pulling the door
handle.
The door cannot be locked if the engine
switch is in ACC or ON, or the electronic
key is left inside the vehicle. However, the key may not be detected correctly
and the door may be locked.
■Door lock prevention function
This function prevents the doors from being locked if an electronic key is left
inside the vehicle.
■Customization
Some functions can be customized. ( P.377)
WA R N I N G
■When using the wireless remote
control and operating the power
windows
Operate the power window after
checking to make sure that there is no
possibility of any passenger having any of their body parts caught in the
window. Also, do not allow children to
operate the wireless remote control. It
is possible for children and other pas- sengers to get caught in the power
window.
Unlocking and locking the
doors from the inside

1063-2. Opening, closing and locking the doors and trunk
Trunk
The trunk can be opened using
the trunk opener switch, entry
function or wireless remote
control.
WA R N I N G
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■Before driving
●Make sure that the trunk lid is closed before driving. If not fully
closed, while driving, it may open
unexpectedly, hit near-by objects, or luggage may fall out, possibly
leading to an accident.
Also, exhaust gasses may enter the vehicle, possibly leading to death or
a serious health hazard.
●Do not allow children to play in the
trunk.
If a child is accidentally locked in the trunk, they could suffer from
heat exhaustion, suffocation or
other injuries.
●Do not allow a child to open or
close the trunk lid. Doing so may cause the trunk lid to
open unexpectedly, or cause the
child’s hands, head, or neck to be caught by the closing trunk lid.
■Important points while driving
Never let anyone sit in the trunk. In
the event of sudden braking or a colli-
sion, they are susceptible to death or serious injury.
■Using the trunk
Observe the following precautions.
Failure to do so may cause parts of
the body to be caught, resulting in serious injury.
●Remove any heavy loads, such as snow and ice, from the trunk lid
before opening it. Failure to do so
may cause the trunk lid to suddenly shut again after it is opened.
●Be careful not to come into contact with the exhaust gasses when
opening or closing the trunk. If the
engine is running, there is a risk of being burned by the exhaust
gasses.
●When opening or closing the trunk
lid, thoroughly check to make sure
the surrounding area is safe.
●If anyone is in the vicinity, make
sure they are safe and let them know that the trunk is about to open
or close.
●Use caution when opening or clos-
ing the trunk lid in windy weather as
it may move abruptly in strong wind.
●The trunk lid may suddenly shut if it
is not opened fully. It is more diffi- cult to open or close the trunk lid on
an incline than on a level surface,
so beware of the trunk lid unexpect- edly opening or closing by itself.
Make sure that the trunk lid is fully
open and secure before using the trunk.

1083-2. Opening, closing and locking the doors and trunk
■Smart entry & start system
While carrying the electronic key,
press the button on the trunk lid.
When all of the doors are unlocked,
the trunk lid can be opened while
not carrying an electronic key. How-
ever, as the doors will be locked
when the vehicle is driven (at a
vehicle speed of 5 km/h [3 mph] or
more), the trunk will not be able to
be opened until a door is opened.
■Wireless remote control
Press and hold the switch.
■Trunk light
The trunk light turns on when the trunk
is opened.
■Function to prevent the trunk being
locked with the electronic key inside
●When both side doors are locked, closing the trunk lid with the electronic
key left inside the trunk will sound an
alarm. In this case, the trunk lid can be
opened by pressing the trunk release
button on the trunk lid.
●If the spare electronic key is put in the
trunk with both side doors locked, the key confinement prevention function
is activated so the trunk can be
opened. In order to prevent theft, take all electronic keys with you when leav-
ing the vehicle.
●If the electronic key is put in the trunk
with both side doors locked, the key
may not be detected depending on the location of the key and the sur-
rounding radio wave conditions. In this
case, the key confinement prevention function cannot be activated, causing
the doors to lock when the trunk is
closed. Make sure to check where the
key is before closing the trunk.
●The key confinement prevention func-
tion cannot be activated if either door is unlocked. In this case, open the
trunk using the trunk opener.

109
3
3-2. Opening, closing and locking the doors and trunk
Before driving
■If the smart entry & start system or
the wireless remote control does not operate properly
Replace the key battery with a new one
if it is depleted. ( P.316)
■Customization
Some functions can be customized.
( P.377)
■Antenna location
Antennas outside the cabin
Antennas inside the cabin
Antenna outside the trunk
Antenna inside the trunk
Smar t entr y & start sys-
tem
The following operations can
be performed simply by carry-
ing the electronic key on your
person, for example in your
pocket. The driver should
always carry the electronic
key.
 Locks and unlocks the doors
( P.103)
 Opens the trunk (P. 1 0 8 )
 Starts the engine (P.139)
A
C
D

111
3
3-2. Opening, closing and locking the doors and trunk
Before driving
• The smart entry & start system has
not been used for 5 days or longer.
●If the smart entry & start system has
not been used for 14 days or longer, the doors cannot be unlocked at the
passenger door. In this case, take
hold of the driver’s door handle, or use the wireless remote control or
mechanical key, to unlock the doors.
■Electronic Key Battery-Saving
Function
When battery-saving mode is set, bat-
tery depletion is minimized by stopping
the electronic key from receiving radio waves.
Press twice while pressing and
holding . Confirm that the electronic
key indicator flashes 4 times.
While the battery-saving mode is set,
the smart entry & start system cannot be
used. To cancel the function, press any
of the electronic key buttons.
■Conditions affecting operation
The smart entry & start system uses
weak radio waves. In the following situa- tions, the communication between the
electronic key and the vehicle may be
affected, preventing the smart entry &
start system, wireless remote control and engine immobilizer system from
operating properly. (Ways of coping:
 P.357)
●When the electronic key battery is
depleted
●Near a TV tower, electric power plant,
gas station, radio station, large dis- play, airport or other facility that gen-
erates strong radio waves or electrical
noise
●When carrying a portable radio, cellu-
lar phone, cordless phone or other
wireless communication device
●When the electronic key is in contact
with, or is covered by the following metallic objects
• Cards to which aluminum foil is
attached • Cigarette boxes that have aluminum
foil inside
• Metallic wallets or bags •Coins
• Hand warmers made of metal
• Media such as CDs and DVDs
●When other wirele ss keys (that emit
radio waves) are being used nearby
●When carrying the electronic key
together with the following devices that emit radio waves
• Another vehicle’s electronic key or a
wireless key that emits radio waves • Personal computers or personal digi-
tal assistants (PDAs)
• Digital audio players • Portable game systems
●If window tint with a metallic content or metallic objects are attached to the
rear window
●When the electronic key is placed
near a battery charger or electronic
devices
■Note for the entry function
●Even when the electronic key is within
the effective range (detection areas), the system may not operate properly
in the following cases:
• The electronic key is too close to the window or outside door handle, near
the ground, or in a high place when
the doors are locked or unlocked.
• The electronic key is near the ground or in a high place, or too close to the
rear bumper center when the trunk is
unlocked. • The electronic key is on the instru-
ment panel, rear package tray or floor,
or in the door pockets or glove box when the engine is started or engine

1123-2. Opening, closing and locking the doors and trunk
switch modes are changed.
●Do not leave the electronic key on top
of the instrument panel or near the
door pockets when exiting the vehicle. Depending on the radio wave recep-
tion conditions, it may be detected by
the antenna outside the cabin and the doors will become lockable from the
outside, possibly trapping the elec-
tronic key inside the vehicle.
●As long as the electronic key is within
the effective range, the doors may be locked or unlocked by anyone. How-
ever, only the doors detecting the
electronic key can be used to unlock the vehicle.
●Even if the electronic key is not inside the vehicle, it may be possible to start
the engine if the electronic key is near
the window.
●The doors may unlock or lock if a
large amount of water splashes on the door handle, such as in the rain or in a
car wash, when the electronic key is
within the effective range. (The doors will automatically be locked after
approximately 30 seconds if the doors
are not opened and closed.)
●If the wireless remote control is used
to lock the doors when the electronic key is near the vehicle, there is a pos-
sibility that the door may not be
unlocked by the entry function. (Use the wireless remote control to unlock
the doors.)
●Touching the door lock or unlock sen-
sor while wearing gloves may prevent
lock or unlock operation.
●Vehicles without a double locking sys-
tem: When the lock operation is per-
formed using the lock sensor, recognition signals will be shown up to
three consecutive times. After this, no
recognition signals will be given.
●If the door handle becomes wet while
the electronic key is within the effec- tive range, the door may lock and
unlock repeatedly. In this case, follow
the following correction procedures to
wash the vehicle:
• Place the electronic key in a location 2 m (6 ft.) or more away from the vehi-
cle. (Take care to ensure that the key
is not stolen.) • Set the electronic key to battery-sav-
ing mode to disable the smart entry &
start system. ( P. 1 1 1 )
●If the electronic key is inside the vehi-
cle and a door handle becomes wet during a car wash, a message may be
shown on the multi-information dis-
play and a buzzer will sound outside the vehicle. To turn off the alarm, lock
both side doors.
●The lock sensor may not work prop-
erly if it comes into contact with ice,
snow, mud, etc. Clean the lock sensor and attempt to operate it again.
●A sudden handle operation or a han-dle operation immediately after enter-
ing the effective range may prevent
the doors from being unlocked. Touch the door unlock sensor and check that
the doors are unlocked before pulling
the door handle again.
●Unlocking the vehicle may take more
time if another electronic key is within the effective range.
■When the vehicle is not driven for
extended periods
●To prevent theft of the vehicle, do not
leave the electronic key within 2 m (6
ft.) of the vehicle.
●The smart entry & start system can be
deactivated in advance. ( P. 1 1 3 )
●Setting the electronic key to bat-
tery-saving mode helps to reduce key battery depletion. ( P. 1 1 1 )
■To operate the system properly
●Make sure to carry the electronic key
when operating th e system. Do not get the electronic key too close to the
vehicle when operating the system
from the outside of the vehicle.
Depending on the position and holding
condition of the electronic key, the key may not be detected correctly and the

113
3
3-2. Opening, closing and locking the doors and trunk
Before driving
system may not operat e properly. (The
alarm may go off accidentally, or the door lock prevention function may not
operate.)
●Do not leave the electronic key inside
the trunk.
The key confinement prevention func- tion may not operate, depending on
the location of the key (the inside
edge of the Trunk), conditions (inside a metal bag, close to metallic objects)
and the radio waves in the surround-
ing area. ( P.109)
■If the smart entry & start system does not operate properly
●Locking and unlocking the doors:  P. 3 5 7
●Starting the engine: P. 3 5 8
■Customization
Some functions can be customized.
( P.377)
■If the smart entry & start system
has been disabled
●Locking and unlocking the doors:
Use the wireless remote control or mechanical key. ( P.103, 357)
●Starting the engine and changing engine switch modes: P. 3 5 8
●Stopping the engine: P. 1 4 1
In the following situations, the
smart entry & start system should
be disabled.
 When people with implantable
cardiac pacemakers, cardiac
resynchronization therapy pace-
WA R N I N G
■Caution regarding interference
with electronic devices
●People with implantable cardiac pacemakers, cardiac
resynchronization therapy-pace-
makers or implantable cardioverter defibrillators should maintain a rea-
sonable distance between them-
selves and the smart entry & start
system antennas. ( P.110) The radio waves may affect the
operation of such devices. If neces-
sary, the entry function can be disa- bled. Ask any authorized Toyota
retailer or Toyota authorized
repairer, or any reliable repairer for details, such as the frequency of
radio waves and timing of the emit-
ted radio waves. Then, consult your doctor to see if you should disable
the entry function.
●Users of any electrical medical
device other than implantable car-
diac pacemakers, cardiac resynchronization therapy-pace-
makers or implantable cardioverter
defibrillators should consult the manufacturer of the device for infor-
mation about its operation under
the influence of radio waves. Radio waves could have unex-
pected effects on the operation of
such medical devices.
The smart entry & start system can be
disabled. ( P.113)
When to disable the smart
entry & start system

1143-2. Opening, closing and locking the doors and trunk
makers or implantable
cardioverter defibr illators ride in
the vehicle.
 When the vehicle will not be
used for a long time, or the smart
entry & start system is not used.
 When storing an electronic key
near or inside the vehicle cannot
be avoided.
When the smart entry & start sys-
tem is disabled, use the wireless
remote control to lock and unlock
the doors.
When starting the en gine, it will be
necessary to hold the electronic
key near the engine switch.
( P.358)
■Disabling the smart entry &
start system
The smart entry & start system can
be disabled by opening and closing
the doors or using the wireless
remote control.
Door opening/closing method
1 While sitting in the driver’s seat,
close the door.
2 Press of the door lock
switch.
3 Within 5 seconds of performing
step 2, open the driver’s door.
4 Within 5 seconds of performing
step 3, press of the door
lock switch 2 times with the door
open.
5 Within 10 seconds of performing
step 4, close and open the
driver’s door 2 times.
6 Within 10 seconds of performing
step 5, press of the door
lock switch 2 times with the door
open.
7 Within 10 seconds of performing
step 6, close and open the
driver’s door 1 time.
8 Within 5 seconds of performing
step 7, close the driver’s door.
A buzzer will sound for approximately 2
seconds and the smart entry & start
system will be disabled.
Wireless remote control method
1 Open the driver’s door and push
the lock lever forward.
2 Press and hold and of
the wireless remote control at
the same time for 5 seconds or
more.
A buzzer will sound for approximately 2
seconds and the smart entry & start
system will be disabled.
■Enabling the smart entry &
start system
The smart entry & start system can
be enabled by performing the pro-