
126GETTING TO KNOW YOUR INSTRUMENT PANEL  
while operating the vehicle. Chimes will also 
accompany the 75, 50 and 25 mile remaining 
distances. The DEF Low telltale will be on contin -
uously until DEF fluid is topped off.
Engine Will Not Restart Refill DEF  — This 
message will display when the DEF driving range 
is less than one mile, DEF fluid top off is 
required or the engine will not restart. The 
message will be displayed in the instrument 
cluster display during vehicle start up, and it will 
be accompanied by a single chime. The DEF Low 
telltale will be illuminated continuously until 
DEF fluid tank is filled with a minimum of 
two gallons of DEF.
DIESEL EXHAUST FLUID (DEF) FAULT 
W
ARNING MESSAGES
There are different messages which are displayed 
if the vehicle detects that the DEF system has been 
filled with a fluid other than DEF, has experienced 
component failures, or when tampering has been 
detected.
When the DEF system needs to be serviced the 
following warnings will display:
Service DEF System See Dealer  — This message 
will display when the fault is initially detected 
and each time the vehicle is started. The 
message will be accompanied by a single chime 
and the Malfunction Indicator Light. We recom -
mend you drive to the nearest authorized dealer  and have your vehicle serviced immediately. If 
not corrected in 50 miles, vehicle will enter the 
“Engine Will not restart in XXX mi Service DEF 
See dealer” warning stage and message.
Incorrect DEF Detected See Dealer
 — This 
message will display if the DEF system has 
detected the incorrect fluid has been introduced 
to the DEF tank. The message will be accompa -
nied by a single chime. We recommend you 
drive to your nearest authorized dealer and 
have your vehicle serviced immediately. If not 
corrected in 30 miles, vehicle will enter the 
“Engine Will not restart in XXX mi Service DEF 
See dealer” warning stage and message.
Engine Will Not Restart in XXX mi Service DEF 
See Dealer  — This message is first displayed if 
the fault detected is not serviced after 50 miles 
of operation. It is also displayed at 150 miles, 
125 miles and 100 miles. System service is  required within the displayed mileage. The 
message will be displayed during vehicle start 
up with an updated distance mileage, and it will 
be accompanied by a single chime. Starting at 
100 miles, remaining range will be continuously 
displayed while operating the vehicle. Chimes 
will also accompany the 75, 50 and 25 mile 
remaining distances. We recommend you drive 
to the nearest authorized dealer and have your 
vehicle serviced immediately.
Engine Will Not Restart Service DEF System See 
Dealer  — This message will display if DEF 
system issue detected is not serviced during the 
allowed period. Your engine will not restart 
unless your vehicle is serviced by an authorized 
dealer. This message will be displayed when 
under 1 mile until engine will not start and each 
time the vehicle is started, and will be continu -
ously displayed. The message will be accompa -
nied by a single chime. Your Malfunction 
Indicator Light will be continuously illumined. 
We highly recommend you drive to the nearest 
authorized dealer if the message appears while 
engine is running.
Engine Will Not Start Service DEF System See 
Dealer  — This message will display when the 
fault detected is not serviced after the Engine 
will not restart Service DEF System See Dealer 
message is displayed on the next subsequent 
restart. Your engine will not start unless your 
vehicle is serviced by an authorized dealer. 
The message will be accompanied by a single 
chime. Your Malfunction Indicator Light will be 
continuously illuminated. If the message 
appears and you can not start the engine, we 
recommend having your vehicle towed to the 
nearest authorized dealer immediately.
22_DT_OM_EN_USC_t.book  Page 126   

GETTING TO KNOW YOUR INSTRUMENT PANEL127
BATTERY SAVER ON/BATTERY SAVER 
M
ODE MESSAGE — ELECTRICAL LOAD 
R
EDUCTION ACTIONS — IF EQUIPPED   
This vehicle is equipped with an Intelligent Battery 
Sensor (IBS) to perform additional monitoring of 
the electrical system and status of the vehicle 
battery.
In cases when the IBS detects charging system 
failure, or the vehicle battery conditions are 
deteriorating, electrical load reduction actions will 
take place to extend the driving time and distance 
of the vehicle. This is done by reducing power to or 
turning off non-essential electrical loads.
Load reduction is only active when the engine is 
running. It will display a message if there is a risk 
of battery depletion to the point where the vehicle 
may stall due to lack of electrical supply, or will not 
restart after the current drive cycle.
When load reduction is activated, the message 
“Battery Saver On Some Systems May Have 
Reduced Power” will appear in the instrument 
cluster. These messages indicate the vehicle battery has a 
low state of charge and continues to lose electrical 
charge at a rate that the charging system cannot 
sustain.NOTE:
The charging system is independent from load 
reduction. The charging system performs a diag
-
nostic on the charging system continuously.
If the Battery Charge Warning Light is on it may 
indicate a problem with the charging system  
Ú page 129.
The electrical loads that may be switched off 
(if equipped), and vehicle functions which can be 
affected by load reduction:
Heated Seats / Vented Seats / Heated Wheel
Rear Defroster And Heated Mirrors
HVAC System
115 Volts AC Power Inverter System
Audio and Telematics System
Loss of the battery charge may indicate one or 
more of the following conditions:
The charging system cannot deliver enough 
electrical power to the vehicle system because 
the electrical loads are larger than the capability 
of charging system. The charging system is still 
functioning properly.
Turning on all possible vehicle electrical loads 
(e.g. HVAC to max settings, exterior and interior 
lights, overloaded power outlets +12 Volts, 
115 Volts AC, USB ports) during certain driving 
conditions (city driving, towing, frequent stop -
ping).
Installing options like additional lights, upfitter 
electrical accessories, audio systems, alarms 
and similar devices.
Unusual driving cycles (short trips separated by 
long parking periods).
The vehicle was parked for an extended period 
of time (weeks, months).
The battery was recently replaced and was not 
charged completely.
The battery was discharged by an electrical load 
left on when the vehicle was parked.
The battery was used for an extended period 
with the engine not running to supply radio, 
lights, chargers, +12 Volt portable appliances 
like vacuum cleaners, game consoles and 
similar devices.
3
22_DT_OM_EN_USC_t.book  Page 127   

GETTING TO KNOW YOUR INSTRUMENT PANEL129
NOTE:The light may flash momentarily during sharp 
cornering maneuvers, which change fluid level 
conditions. The vehicle should have service 
performed, and the brake fluid level checked.
If brake failure is indicated, immediate repair is 
necessary.
Vehicles equipped with the Anti-Lock Brake System 
(ABS) are also equipped with Electronic Brake 
Force Distribution (EBD). In the event of an EBD 
failure, the Brake Warning Light will turn on along 
with the ABS Light. Immediate repair to the ABS 
system is required.
Operation of the Brake Warning Light can be 
checked by turning the ignition switch from the OFF 
position to the ON/RUN position. The light should 
illuminate for approximately two seconds. The light 
should then turn off unless the parking brake is 
applied or a brake fault is detected. If the light does 
not illuminate, have the light inspected by an 
authorized dealer. The light also will turn on when the parking brake 
is applied with the ignition switch in the ON/RUN 
position.
NOTE:This light shows only that the parking brake is 
applied. It does not show the degree of brake appli
-
cation.
Battery Charge Warning Light  
This warning light will illuminate when the 
battery is not charging properly. If it stays 
on while the engine is running, there may 
be a malfunction with the charging 
system. Contact an authorized dealer as soon as 
possible.
This indicates a possible problem with the 
electrical system or a related component.
Door Open Warning Light
This indicator will illuminate when a 
door is ajar/open and not fully closed.
NOTE:If the vehicle is moving there will also be a single 
chime.
Electronic Throttle Control (ETC) Warning 
Light  
This warning light will illuminate to 
indicate a problem with the ETC system. 
If a problem is detected while the vehicle 
is running, the light will either stay on or 
flash depending on the nature of the problem. 
Cycle the ignition when the vehicle is safely and 
completely stopped and the transmission is placed 
in the PARK position. The light should turn off. If 
the light remains on with the vehicle running, your 
vehicle will usually be drivable; however, see an 
authorized dealer for service as soon as possible.
NOTE:This light may turn on if the accelerator and brake 
pedals are pressed at the same time.
If the light continues to flash when the vehicle is 
running, immediate service is required and you 
may experience reduced performance, an 
elevated/rough idle, or engine stall and your 
vehicle may require towing. The light will come on 
when the ignition is placed in the ON/RUN or ACC/
ON/RUN position and remain on briefly as a bulb 
check. If the light does not come on during starting, 
have the system checked by an authorized dealer.
WARNING!
Driving a vehicle with the red brake light on is 
dangerous. Part of the brake system may have 
failed. It will take longer to stop the vehicle. You 
could have a collision. Have the vehicle checked 
immediately.
3
22_DT_OM_EN_USC_t.book  Page 129   

130GETTING TO KNOW YOUR INSTRUMENT PANEL  
Electric Power Steering (EPS) Fault 
Warning Light 
This warning light will turn on when 
there's a fault with the EPS system  
Úpage 173.
Engine Coolant Temperature Warning 
Light 
This warning light warns of an 
overheated engine condition. If the 
engine coolant temperature is too high, 
this indicator will illuminate and a single 
chime will sound. If the temperature reaches the 
upper limit, a continuous chime will sound for four 
minutes or until the engine is able to cool, 
whichever comes first.
If the light turns on while driving, safely pull over 
and stop the vehicle. If the Air Conditioning (A/C) 
system is on, turn it off. Also, shift the transmission 
into NEUTRAL (N) and idle the vehicle. If the 
temperature reading does not return to normal, 
turn the engine off immediately and call for service  
Ú page 387.
Hood Open Warning Light 
This warning light will illuminate when the 
hood is ajar/open and not fully closed.
NOTE:If the vehicle is moving, there will also be a single 
chime.
Oil Pressure Warning Light  
This warning light will illuminate, and a 
chime will sound, to indicate low engine 
oil pressure. If the light and chime turn on 
while driving, safely stop the vehicle and 
turn off the engine as soon as possible. After the 
vehicle is safely stopped, restart the engine and 
monitor the Oil Pressure Warning Light. If the Oil 
Pressure Warning Light is still illuminated, turn the 
engine OFF and contact an authorized dealer for 
further assistance. Do not operate the vehicle until 
the cause is corrected. If the lamp is no longer 
illuminated, the engine can be operated but it is 
recommended to take the vehicle to an authorized 
dealer as soon as possible.
Do not operate the vehicle until the cause is 
corrected. This light does not indicate how much oil 
is in the engine. The engine oil level must be 
checked under the hood.
Oil Temperature Warning Light 
This warning light will illuminate to 
indicate the engine oil temperature is 
high. If the light turns on while driving, 
stop the vehicle and shut off the engine 
as soon as possible. Wait for oil temperature to 
return to normal levels.
Seat Belt Reminder Warning Light 
This warning light indicates when the 
driver or passenger seat belt is 
unbuckled. When the ignition is first 
placed in the ON/RUN or ACC/ON/RUN 
position and if the driver’s seat belt is unbuckled, 
a chime will sound and the light will turn on. When 
driving, if the driver or front passenger seat belt 
remains unbuckled, the Seat Belt Reminder Light 
will flash or remain on continuously and a chime 
will sound  Ú page 334.
Tailgate Open Warning Light 
This warning light will illuminate when the 
tailgate is open.
NOTE:If the vehicle is moving, there will also be a single 
chime.
WARNING!
Continued operation with reduced assist could 
pose a safety risk to yourself and others. Service 
should be obtained as soon as possible.
22_DT_OM_EN_USC_t.book  Page 130   

GETTING TO KNOW YOUR INSTRUMENT PANEL131
Trailer Brake Disconnected Warning Light
This warning light will illuminate when the 
Trailer Brake has been disconnected.
Transmission Temperature Warning Light — 
If Equipped 
This warning light will illuminate to warn 
of a high transmission fluid temperature. 
This may occur with strenuous usage 
such as trailer towing. If this light turns 
on, stop the vehicle and run the engine at idle or 
slightly faster, with the transmission in PARK or 
NEUTRAL, until the light turns off. Once the light 
turns off, you may continue to drive normally.
Vehicle Security Warning Light — 
If Equipped  
This light will flash at a fast rate for 
approximately 15 seconds when the 
vehicle security system is arming, and 
then will flash slowly until the vehicle 
is disarmed.
YELLOW WARNING LIGHTS
Adaptive Cruise Control (ACC) Fault 
Warning Light — If Equipped 
This warning light will illuminate to 
indicate a fault in the ACC system. 
Contact an authorized dealer for service  
Ú page 178.
Air Suspension Fault Warning Light — 
If Equipped 
 This light will illuminate when a fault is 
detected with the air suspension system.
Anti-Lock Brake System (ABS) Warning 
Light 
 This warning light monitors the ABS. 
The light will turn on when the ignition is 
placed in the ON/RUN or ACC/ON/RUN 
position and may stay on for as long as 
four seconds. If the ABS light remains on or turns on while 
driving, then the Anti-Lock portion of the brake 
system is not functioning and service is required as 
soon as possible. However, the conventional brake 
system will continue to operate normally, 
assuming the Brake Warning Light is not also on.
If the ABS light does not turn on when the ignition 
is placed in the ON/RUN or ACC/ON/RUN position, 
have the brake system inspected by an authorized 
dealer.
Electronic Park Brake Warning Light 
This warning light will illuminate to 
indicate the Electronic Park Brake is not 
functioning properly and service is 
required. Contact an authorized dealer.
Electronic Stability Control (ESC) Active 
Warning Light — If Equipped 
 This warning light will indicate when the 
ESC system is Active. The ESC Indicator 
Light in the instrument cluster will come 
on when the ignition is placed in the 
ON/RUN or ACC/ON/RUN position, and when ESC 
is activated. It should go out with the engine 
running. If the ESC Indicator Light comes on 
continuously with the engine running, a 
malfunction has been detected in the ESC system. 
If this warning light remains on after several 
ignition cycles, and the vehicle has been driven 
WARNING!
If you continue operating the vehicle when the 
Transmission Temperature Warning Light is 
illuminated you could cause the fluid to boil over, 
come in contact with hot engine or exhaust 
components and cause a fire.
CAUTION!
Continuous driving with the Transmission 
Temperature Warning Light illuminated will 
eventually cause severe transmission damage 
or transmission failure.
3
22_DT_OM_EN_USC_t.book  Page 131   

132GETTING TO KNOW YOUR INSTRUMENT PANEL  
several miles (kilometers) at speeds greater than 
30 mph (48 km/h), see an authorized dealer as 
soon as possible to have the problem diagnosed 
and corrected.
The ESC OFF Indicator Light and the ESC Indi -
cator Light come on momentarily each time the 
ignition is placed in the ON/RUN or ACC/ON/
RUN position.
The ESC system will make buzzing or clicking 
sounds when it is active. This is normal; the 
sounds will stop when ESC becomes inactive.
This light will come on when the vehicle is in an 
ESC event.
Electronic Stability Control (ESC) OFF 
Warning Light — If Equipped
This warning light indicates 
the ESC is off.
Each time the ignition is turned to ON/RUN or ACC/
ON/RUN, the ESC system will be on, even if it was 
turned off previously.
Service LaneSense Warning Light — 
If Equipped
This warning light will illuminate when the 
LaneSense system is not operating and 
requires service. Please contact an 
authorized dealer.
Low Washer Fluid Warning Light — 
If Equipped
This warning light will illuminate when the 
windshield washer fluid is low.
Low Fuel Warning Light 
When the fuel level is less than a ¼ tank, 
and the Distance to Empty is less than 
50 miles, this light will turn on and 
remain on until fuel is added.
A single warning chime will sound with Low Fuel 
Warning.
Engine Check/Malfunction Indicator 
Warning Light (MIL) 
The MIL is a part of an Onboard 
Diagnostic System called OBD II that 
monitors engine and automatic 
transmission control systems. This 
warning light will illuminate when the ignition is in 
the ON/RUN position before engine start. If the 
bulb does not come on when turning the ignition 
switch from OFF to ON/RUN, have the condition 
checked promptly.
Certain conditions, such as a loose or missing gas 
cap, poor quality fuel, etc., may illuminate the light 
after engine start. The vehicle should be serviced if  the light stays on through several typical driving 
styles. In most situations, the vehicle will drive 
normally and will not require towing.
When the engine is running, the MIL may flash to 
alert serious conditions that could lead to 
immediate loss of power or severe catalytic 
converter damage. The vehicle should be serviced 
by an authorized dealer as soon as possible if this 
occurs.
WARNING!
A malfunctioning catalytic converter, as 
referenced above, can reach higher 
temperatures than in normal operating 
conditions. This can cause a fire if you drive 
slowly or park over flammable substances such 
as dry plants, wood, cardboard, etc. This could 
result in death or serious injury to the driver, 
occupants or others.
CAUTION!
Prolonged driving with the Malfunction Indicator 
Light (MIL) on could cause damage to the 
vehicle control system. It also could affect fuel 
economy and driveability. If the MIL is flashing, 
severe catalytic converter damage and power 
loss will soon occur. Immediate service is 
required.
22_DT_OM_EN_USC_t.book  Page 132   

136GETTING TO KNOW YOUR INSTRUMENT PANEL  
Water In Fuel Indicator Light — If Equipped
The Water In Fuel Indicator Light will 
illuminate when there is water detected 
in the fuel filter. If this light remains on, 
DO NOT start the vehicle before you drain 
the water from the fuel filter to prevent engine 
damage, and please see an authorized dealer.
GREEN INDICATOR LIGHTS
Adaptive Cruise Control (ACC) Set With 
Target Light — If Equipped
This will display when the ACC is set and 
a vehicle in front is detected  
Ú page 178.
Adaptive Cruise Control (ACC) Set With No 
Target Detected Indicator Light — 
If Equipped
This light will turn on when the ACC is SET 
and there is no vehicle in front detected  
Úpage 178.
ECO Mode Indicator Light
This light will turn on when ECO mode is 
active.
Front Fog Indicator Light —
If Equipped
This indicator light will illuminate when 
the front fog lights are on.
LaneSense Indicator Light —
If Equipped
The LaneSense indicator light illuminates 
solid green when both lane markings 
have been detected and the system is 
“armed” and ready to provide visual and 
torque warnings if an unintentional lane departure 
occurs  Ú page 196.
Parking/Headlights On Indicator Light 
This indicator light will illuminate when 
the parking lights or headlights are 
turned on.
Cruise Control SET Indicator Light — 
If Equipped With Premium Instrument 
Cluster Display  
This light will turn on when the cruise 
control is set  Ú page 176.
Stop/Start Active Indicator Light —
If Equipped
This indicator light will illuminate when 
the Stop/Start function is in “Autostop” 
mode  Úpage 174.
CAUTION!
The presence of water in the fuel system circuit 
may cause severe damage to the injection 
system and irregular engine operation. If the 
indicator light is illuminated, contact an 
authorized dealer as soon as possible to bleed 
the system. If the above indications come on 
immediately after refuelling, water, or AdBlue 
(UREA) has probably been poured into the tank: 
switch the engine off immediately and contact 
an authorized dealer.
22_DT_OM_EN_USC_t.book  Page 136   

138GETTING TO KNOW YOUR INSTRUMENT PANEL  
ONBOARD DIAGNOSTIC SYSTEM — OBD II   
Your vehicle is equipped with a sophisticated 
Onboard Diagnostic system called OBD II. This 
system monitors the performance of the 
emissions, engine, and transmission control 
systems. When these systems are operating 
properly, your vehicle will provide excellent 
performance and fuel economy, as well as engine 
emissions well within current government 
regulations.
If any of these systems require service, the OBD II 
system will turn on the Malfunction Indicator Light 
(MIL). It will also store diagnostic codes and other 
information to assist your service technician in 
making repairs. Although your vehicle will usually 
be drivable and not need towing, see an authorized 
dealer for service as soon as possible.
ON B O A R D  DI A G N O S T I C  SY S T E M 
( OB D   II )   C
Y B E R S E C U R I T Y
Your vehicle is required to have OBD II and a 
connection port to allow access to information 
related to the performance of your emissions 
controls. Authorized service technicians may need 
to access this information to assist with the 
diagnosis and service of your vehicle and 
emissions system  Ú page 233.
CAUTION!
Prolonged driving with the MIL on could cause 
further damage to the emission control 
system. It could also affect fuel economy and 
driveability. The vehicle must be serviced 
before any emissions tests can be performed.
If the MIL is flashing while the vehicle is 
running, severe catalytic converter damage 
and power loss will soon occur. Immediate 
service is required.
WARNING!
ONLY an authorized service technician should 
connect equipment to the OBD II connection 
port in order to read the VIN, diagnose, or 
service your vehicle.
If unauthorized equipment is connected to the 
OBD II connection port, such as a 
driver-behavior tracking device, it may:
Be possible that vehicle systems, 
including safety related systems, could be 
impaired or a loss of vehicle control could 
occur that may result in an accident 
involving serious injury or death.
Access, or allow others to access, infor -
mation stored in your vehicle systems, 
including personal information.
22_DT_OM_EN_USC_t.book  Page 138