5
Corner radars
6 Ultrasonic sensors
7 Reversing camera &
W
WARNING
ARNING Risk of accident due torestric-
te d de tection per form ance of vehicle sen-
sors and cameras
If th e area around vehicle senso rsor cameras
is co vered, damaged or dirty, cer tain driving
and saf ety sy stems cannot function co rrectl y.
There is a risk of an accident. #
Keep the area around vehicle senso rsor
cameras clear of any obst ructions and
clean. #
Have damage tothe bumper, radiator
gr ille or stone chipping in the area of the
front and rear wind owsre paired at a
qu ali/ed specialist workshop. Pa
rticular ly,ke ep the areas around the sensors
and cameras free of dirt, ice or slush
(/ page 373). The sensors and cameras must
not be co vered and the de tection ranges around
th em must be kept free. Do not at tach additional licence plate brac
kets, advertisements, stic kers,
fo ils or foils toprotect against stone chippings in
th e de tection range of the sensors and cameras.
Make sure that there are no overhanging loads
pr otru ding into the de tection range.
If th ere is damage toa bumper or thera diator
gr ille, or aTer an impact, ha vethe function of the
senso rschecked at a quali/ed specialist work-
shop. Ha vedamage or stone chipping in the area
of the cameras on the front and rear wind ows
re paired at a quali/ed specialist workshop.
% The reve rsing camera can extend and retract
automatically forth e purpose of calibration,
ev en though there is no camera image in the
displa y. Ov Ov
er
ervie
vie w of dr
w of dr iving syst
iving syst ems and dr
ems and dr iving safe
iving safe ty
ty
syst
syst ems
ems R
ABS (/ page 219)
R BAS (/ page 219)
R ESP ®
(/ page 220)
R ESP ®
Crosswind Assist (/ page 221) R
ESP ®
trailer stabilisation (/ page 221)
R EBD (/ page 222)
R STEER CONTROL (/ page 222)
R HOLD function (/ page 222)
R Hill Start Assist (/ page 223)
R Adaptive Brake Lights (/ page 224)
R Valet service mode (/ page 224)
R Beginner driver mode (/ page 225)
R ATTENTION ASSIST (/ page 225)
R Cruise cont rol (/ page 227)
R Limiter (/ page 228)
R Speed Limit Assist (countr y-dependent)
(/ page 250)
R Tra1c Sign Assist (/ page 251)
R Tra1c light view (/ page 255)
R AIRMATIC (/ page 262)218
218
Driving and parking
R
Longitudinal/la tera l acceleration
R Steering angle
R Engine speed
R Engine oil/tyre tempe rature
Based on the anal ysis yo u can check and optimise
driving characteristics for any position on the
trac k.
Expor
Expor ting tr
ting tr ack
acks (USB)
s (USB) #
Select õTracks.
An ove rview of all stored trac ksappears. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Export track to… .
The selec ted track can be expor tedto a USB
storage device connected totheve hicle.
Editing tr
Editing tr ack
acks and r
s and r ecor
ecordings
dings #
Select õTracks. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Rename orDelete.
or #
Select a trac k. #
Highlight the desired recording. #
Select uoptions. #
Select Exporting to… orDelete. Se
Se
tting Dr
tting Dr ag R
ag Race
ace Multimedia system:
4 TRACK PACE 5
Drag Race
Measur
Measur ing acceler
ing acceler ation
ation #
Select ZDrag race options. #
Select Acceleration. #
Set a starting speed or select Automatic.
Measurement begins as soon as the speci/ed
starting speed has been reached. #
Set a targetspeed.
Measu rement stops as soon as the speci/ed
targ etspeed has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Measu
rement can be stopped ear lyby inter rupt-
ing the acceleration procedure.
Quart
Quart er
er-mile r
-mile r ace
ace #
Select ZDrag race options. #
Select Quarter-mile. #
Set a targetdistance.
Measurement stops as soon as the speci/ed
targ etdistance has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Timing runs until thetarg etdistance or
a maximum of one mile has been tr avelled.
Measurement can be stopped ear lyby inter rupt-
ing the acceleration procedure.
Measur
Measur ing br
ing braking
aking #
Z Drag race options #
Select Braking. #
Set a starting speed or select Automatic. #
Pull away and startthe measurement. MBUX multimedia system
327
327
