2022 MERCEDES-BENZ EQE SALOON warning

5
L Low beam/high beam
6 R Switches there ar fog light on/o.
When low beam is activated, theT indicator
lamp forth e standing lights will be deactivated
and replaced bytheL low- beam indicator
lamp. #
Always park your vehicle safely using su1cient
lighting, in accordance with there leva nt legal
stipulations.
* N
NOOTE
TE Battery dis charging byoperating the
standing lights Operating
the standing lights over a period of
hours puts a strain on the batter y. #
Where possible, switch on theright X
or leT Wparking light. Fo
rve hicles that are wider than 2 m or lon ger
th an 6 m,single-sided parking lighting is not per-
mitted in some countries. In this case, the stand-
ing lights are also switched on in the parking
lights position. If
th e battery is insu1cient lych arge d, the stand-
ing lights or parking lights will be switched o.
automatically tofacilitate the next engine start.
The exterior lighting (e xcept standing and parking
lights) will switch o. automatically when the driv-
er's door is opened.
R Obser vethe no tes on locator lighting
(/ page 152).
A
A ut ut omatic dr
omatic dr iving lights function
iving lights function
When theve hicle is switched on, the standing
lights, low beam and daytime running lights are
switched on automatically depending on the light
conditions. &
W
WARNING
ARNING Risk of accident when the
dipped beam is switched o. in poor visi-
bility
When the light switch is set toà ,the
dipped beam may not be switched on auto-
matically if there is fog, snow or other causes
of poor visibility such as spr ay. #
In such cases, turn the light switch to
L . The automatic driving lights are only an aid.
Yo u
are responsible forve hicle lighting.
Switc Switc hing t
hing t he r
he rear f
ear f og light
og light on/o.
on/o.
R
R eq
eq uir
uir ements:
ements:
R The light switch is in the L orà posi-
tion. #
Press button R.
Please obser vethe count ry-speci/c la wsonthe
use of rear fog lamps. 142
142
Light and sight

A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the hazar
he hazar d w
d war
arning lights
ning lights Ve
hicles without MBUX Hyperscreen Ve
hicles with MBUX Hyperscreen #
Press button 1.
The hazard warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is braked heavily from a speed of
more than 70 km/h toa standstill. When
you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using thewa rning
lamp button. A A
dap
dap tiv
tive functions of t
e functions of t he DIGIT
he DIGITAL LIGHT
AL LIGHT Int
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
In this system, the headlamps adapt tothe driving
and weather situation. It also pr ovides extended
functions for impr oved illumination of thero ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 145)
R Cornering light (/ page 145)
R Motorw ay mode (/ page 145)
R Enhanced fog light function (/ page 146)
R Bad weather light (/ page 146)
R City lighting (/ page 146)
R Topog raphical compensation (/ page 146)
The system is active only when it is dar k.144
144
Light and sight

Obser
vethe system limitations of Tra1c Sign
Assist (/ page 251).
Collision w
Collision w ar
arning
ning If
yo ufa ll below the safe distance at speeds of at
least 30 km/h, a collision warning symbol will be
projected onto thero ad.
Obser vethe system limitations of Active Brake
Assist (/ page 245).
Lane c
Lane c hang
hange w
e war
arning
ning During assisted lane
changes at speeds of at least
30 km/h, the course of the lane change will be
brightened. This enables youto identify possible
dangers in the new lane at an ear lystage.
Obse rveth e system limitations of Active Lane
Change Assist (/ page 242). Lane k
Lane k
eeping and blind spo
eeping and blind spo t w
t w ar
arning
ning At
speeds of at least 30 km/h, a triangle that indi-
cates a lane cor rection and its direction will be
projected onto thero ad in thefo llowing cases:
R The lane is leT unintentionall y.
Obser vethe system limitations of Active Lane
Ke eping Assist (/ page 259).
R You switch on the turn signal light while an
object or obstacle is in your blind spot.
Obser vethe system limitations of Active Blind
Spot Assist (/ page 255).148
148
Light and sight

Switc
Switc
hing t
hing t he Int
he Int ellig
elligent Light Syst
ent Light Syst em
em on/o.
on/o.
R
R eq
equir uir ements:
ements:
R The vehicle is switched on.
Multimedia system: 4 © 5
Settings 5
Lights
5 DIGITAL LIGHT #
Activate or deactivate Dynamic low beam.
A
A ctiv
ctiv ating or deactiv
ating or deactiv ating enhanced assist
ating enhanced assist ance
ance
functions
functions
% The availability of the functions is dependent
on the countr y.
% This function is an on-demand feature
(/ page 24). #
Select Supporting projections .#
Activate or deactivate the desired projection. #
Activate or deactivate Projection when open-
ing/closing.
If th e locator lighting or theex terior switch-o.
delay time is activated, a high-resolution greet-
ing or farewell scene will be pla yed back for a
short period of time when theve hicle is opened or loc
ked. You can choose between
th eDigital Rain andParticle Flow sequences.
% More information on locator lighting
(/ page 152)
More information on theex terior switch-o.
delay time (/ page 152) A A
dap
dap tiv
tive Highbeam Assist
e Highbeam Assist A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist function t function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist
Ad aptive Highbeam Assist does not react to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist may failto recognise other road users
with their own lighting, or may recognise them
to o late. In
these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist is only an aid. You are
re sponsible for adjusting theve hicle's lighting to
th e pr evailing light, visibility and tra1c conditions.
% Adaptive Highbeam Assist is available on
demand (/ page 24). Light and sight
149 149

Ad
aptive Highbeam Assist automatically switches
between thefo llowing types of light:
R Low beam
R High beam
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
driver displa y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. 150 150
Light and sight

Contr
Contr
ol panel in t
ol panel in t he r
he rear passeng
ear passeng er com
er compar
partment
tment 1
p
Rear reading lamp #
T
To switc
o switc h on or
h on or o.:
o.:press but ton1. A
A
djus
djusting t ting t he ambient lighting
he ambient lighting Multimedia system:
4 © 5
Comfort 5
Ambient lighting
Se
Se tting t
tting t he colour
he colour #
Select Colour. #
Select Monochrome orMulti-colour . #
Set the desired colour or colour scheme. Energy Shine
R The interactive Energy Shine colour world
sho ws th e di.erent phases during the journe y.
Depending on the type of driving condition
(speed, boost e.ect or recuperation), this is
shown in colour bythe active ambient lighting.
A
A djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness.
% Depending on the ambient light conditions,
th e ambient lighting will automatically switch
between day and night modes.
A
A ctiv
ctiv ating t
ating t he br
he br ightness f
ightness f or zones
or zones #
Select Brightness. #
Switch o. Link zones .
The Direct, Indirect andAccents zones can be
set separatel y.
% The Light strip zone can also be set in vehi-
cles with active ambient lighting. A
A
ctiv
ctiv ating
ating e.ects
e.ects &
W
WARNING
ARNING Risk of an accident despite
activated e.ects of ambient lighting and
active ambient lighting
To use theWa rning Assistance e.ects, the
re specti vefunctions must be activated in the
driver assist menu. #
Make sure that the functions and assists
are switched on. %
Obser vethe no tes on driving systems and
yo ur responsibility; you may otherwise failto
re cognise dangers (/ page 217). #
Select Effects . #
Activate the desired e.ect.
% Depending on theve hicle equipment, di.erent
e.ects are available.
Operating feedback e.ects
R Climate: If changes are made tothete mp era-
ture setting in theve hicle, the colour of the
ambient lighting will change brie0y. Light and sight
153 153

R
Voice assistant: Forve hicles with active ambi-
ent lighting, thevo ice assistant is visually ani-
mated.
R Greeting: When youget into theve hicle, a
special colour animation will pla y.
R Charging sequence : The ambient lighting pro-
vides visual feedback on the di.erent states of
ch arge when theve hicle is connected toor
disconnected from thech arging station.
Wa rning assistance e.ects
R Warning when exiting: If an object is de tected
in the blind spot while you are getting out of
th eve hicle, the ambient lighting in the a.ec-
ted door will 0ash red.
Fu rther information on theex itwa rning
(/ page 255).
R Active Lane Keeping Assist: If there is a warn-
ing from Active Lane Keeping Assist, the
active ambient lighting will 0ash red.
Fu rther information on Active Lane Keeping
Assist (/ page 259). R
Active Brake Assist : Ifthere is an Active Brake
Assist warning, the active ambient lighting in
th e centre of the cockpit will 0ash bright red.
Fu rther information on theAc tive Brake Assist
(/ page 245).
R Active Blind Spot Assist: In vehicles with
active ambient lighting, the ambient lighting
on the a.ected side will 0ash red if there is a
wa rning from Active Blind Spot Assist.
Fu rther information on Active Blind Spot
Assist (/ page 255).
R Parking Assist PARKTRONIC: The information
from the parking sensors during parking
manoeuvres is displa yed in colour.
Fu rther information on Parking Assist
PARKTRONIC: (/ page 271)
Multi-colour animat.
R The chosen colour combination will change at
prede/ned inter vals.
% Invehicles with active ambient lighting, an
animation will be pla yed. %
The desired operating feedback and warning
assistance can be activated or deactivated via
th e´ symbol. Depending on the equip-
ment, di.erent operating feedback and warn-
ing assistance e.ects are available.
% Ifth e brightness is set toa low le vel,wa rning
animations will be displa yed at a higher basic
brightness. Switc Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Interior/exterior lighting
5 Interior lighting delayed switch off #
Switch Interior lighting delayed switch off on
or o..
When this function is active, the interior light-
ing will light up for a short time aTer theve hi-
cle is loc ked. 154 154
Light and sight

W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Automatic wiping, normal
3 Å Automatic wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wipes with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 370). R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press theî
button on the combination switch for appr ox-
imately thre e seconds (/ page 155).
The wiper arms will mo veinto there placement
position.
R R emo emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. Light and sight
155
155