2022 HYUNDAI ELANTRA N transmission

4
N Mode Indicator Light ...............................................................\
........................ 4-20
CUSTOM Mode Indicator Light ........................................................................\
... 4-20
REV (Rev Matching) Indicator Light ................................................................... 4-20
Icy Road Warning Light ........................................................................\
............... 4-20
LCD Display Messages ........................................................................\
.................... 4-21 Key not in vehicle (for smart key system) ............................................................ 4-21
Key not detected (for smart key system)............................................................. 4-21
Press START button with key (for smart key system) ......................................... 4-21
Press START button again (for smart key system) .............................................. 4-21
Low Key Battery (for smart key system) .............................................................. 4-21
Shift to P (for smart key system and dual clutch transmission)......................... 4-21
Press brake pedal to start engine (for smart key system and dual clutch
transmission) .....................................................................\
.................................... 4-21
Press clutch pedal to start engine (for smart key system and manual
transmission) .....................................................................\
.................................... 4-21
Press START button again (for smart key system) .............................................. 4-21
Check BRAKE SWITCH fuse (for smart key system and dual clutch
transmission) .....................................................................\
................................... 4-22
Shift to P or N to start engine (for smart key system and dual clutch
transmission) .....................................................................\
................................... 4-22
Battery discharging due to external electrical devices ..................................... 4-22
Door, Hood, Trunk open indicator ...................................................................... 4-22
Sunroof open indicator ........................................................................\
................ 4-22
Lights mode ............................................................\
............................................. 4-23
Wiper mode ........................................................................\
.................................. 4-23
Low pressure ........................................................................\
................................ 4-23
Heated Steering Wheel turned off ...................................................................... 4-23
Low washer fluid ........................................................................\
.......................... 4-23
Low fuel ........................................................................\
........................................ 4-24
Engine Overheated ........................................................................\
...................... 4-24
Check headlight (High) ........................................................................\
............... 4-24
Check headlight (Low) ........................................................................\
................. 4-24
Check turn signal ........................................................................\
......................... 4-24
Check brake light ........................................................................\
......................... 4-24
Check daytime running light ........................................................................\
....... 4-24
Check high mounted brake light ........................................................................\
4-24
Check headlight LED ........................................................................\
................... 4-24
CN7 N HMA 4.indd 4-2 2021-09-14  9:32:02

Instrument Cluster4-10
Transmission Shift Indicator
Normal modeNormal mode
OCN7040013OCN7040013
N modeN mode
OCN7N041138NOCN7N041138N
This indicator displays which shift lever
position is selected.
• Park : P
• Reverse : R
• Neutral : N
• Drive : D
• Manual shift mode : D1, D2, D3, D4, D5, D6, D7, D8
Normal modeNormal mode
OOSN041036NOOSN041036N
N modeN mode
OBC3N040020OBC3N040020
In the manual shift mode, this indicator
informs which gear is desired while
driving to save fuel.
• Dual clutch transmission shift indicator
- Shifting up : ▲2, ▲3, ▲4, ▲5,
▲6, ▲7, ▲8
- Shifting down : ▼1, ▼2, ▼3, ▼4, ▼5, ▼6, ▼7
For example
: Indicates that shifting up to the 3rd gear is desired (currently the shift
lever is in the 2nd or 1st gear).
: Indicates that shifting down to the 3rd gear is desired (currently the
shift lever is in the 4th, 5th, or 6th
gear).
When the system is not working properly,
the indicator is not displayed.
CN7 N HMA 4.indd 4-10 2021-09-14  9:32:30

04
4-21
LCD Display Messages
Key not in vehicle (for smart key
system)
This warning message is displayed if the
smart key is not in the vehicle when you
open or close door in the ACC position or
ON position. The warning sound is heard
when you close door without a smart key
in vehicle.
When attempting to start the vehicle
always have the smart key with you.
Key not detected (for smart key
system)
This warning message is displayed if the
smart key is not detected when you press
the Engine Start/Stop button.
Press START button with key (for
smart key system)
This warning message is displayed if you
press the Engine Start/Stop button while
the warning message “Key not detected”
is displayed.
At this time, the immobilizer indicator
light blinks.
Press START button again (for smart
key system)
This message is displayed if you were
unable to start the vehicle when the
Engine Start/Stop button was pressed.
If this occurs, attempt to start the engine
by pressing the Engine Start/Stop button
again.
If the warning message appears each
time you press the Engine Start/Stop
button, have your vehicle inspected by
an authorized HYUNDAI dealer.
Low Key Battery (for smart key
system)
This warning message is displayed if the
battery of the smart key is discharged
while changing the Engine Start/Stop
button to the OFF position.
Shift to P (for smart key system and
dual clutch transmission)
This warning message is displayed if you
try to turn off the engine without the
shift lever in P (Park) position.
At this time, the Engine Start/Stop button
turns to the ACC position (If you press
the Engine Start/Stop button once more,
it will turn to the ON position).
Press brake pedal to start engine (for
smart key system and dual clutch
transmission)
This warning message is displayed if the
Engine Start/Stop button changes to
the ACC position twice by pressing the
button repeatedly without depressing
the brake pedal.
You can start the vehicle by depressing
the brake pedal.
Press clutch pedal to start engine
(for smart key system and manual
transmission)
This warning message is displayed if the
Engine Start/Stop button is in the ACC
position twice by pressing the button
repeatedly without depressing the clutch
pedal.
Depress the clutch pedal to start the
engine.
Press START button again (for smart
key system)
This message is displayed if you were
unable to start the vehicle when the
Engine Start/Stop button was pressed.
If this occurs, attempt to start the engine
by pressing the Engine Start/ Stop button
again.
If the warning message appears each
time you press the Engine Start/Stop
button, have your vehicle inspected by
an authorized HYUNDAI dealer.
CN7 N HMA 4.indd 4-212021-09-14  9:32:38

Instrument Cluster4-22
Check BRAKE SWITCH fuse (for
smart key system and dual clutch
transmission)
This warning message is displayed if the
brake switch fuse is disconnected.
You need to replace the fuse with a new
one. If that is not possible, you can start
the engine by pressing the Engine Start/
Stop button for 10 seconds in the ACC
position.
Shift to P or N to start engine (for
smart key system and dual clutch
transmission)
This warning message is displayed if you
try to start the engine with the shift lever
not in the P (Park) or N (Neutral) position.
Information
You can start the engine with the shift
lever in the N (Neutral) position. But, for
your safety, we recommend that you start
the engine with the shift lever in the P
(Park) position.
Battery discharging due to external
electrical devices (if equipped)
This message is displayed if the battery
voltage is weak due to any non-factory
electrical accessories (ex. dashboard
camera) while parking. Be careful that
the battery is not discharged.
If the warning message appears after
removing the non-factory electrical
accessories, have the vehicle inspected
by an authorized HYUNDAI dealer.
Door, Hood, Trunk open indicator
OCN7N041017LOCN7N041017L
This warning is displayed indicating
which door, or hood, or trunk is open.
CAUTION
Before driving the vehicle, you should
confirm that the door/ hood/trunk is
fully closed. Also, check there is no
door/hood/ trunk open warning light or
message displayed on the instrument
cluster.
Sunroof open indicator (if equipped)
OCN7N041018LOCN7N041018L
This warning is displayed if you turn off
the engine when the sunroof is open.
Close the sunroof securely when leaving
your vehicle.
CN7 N HMA 4.indd 4-22 2021-09-14  9:32:39

04
4-31
User Settings Mode
OCN7040038LOCN7040038L
In this mode, you can change the
settings of the instrument cluster, doors,
lamps, etc.
1. Driver assistance
2. Door
3. Lights
4. Sound
5. Convenience
6. Service interval
7. Theme selection
8. Other
9. Language
10. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.Shift to P to edit settings / Engage parking
brake to edit settings
This warning message illuminates if
y

ou try to select an item from the User
Settings mode while driving.
• Dual clutch transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
• Manual transmission
For your safety, change the User
Settings after engaging the parking
brake.
Quick guide (Help)
This mode provides quick guides for the
s
ystems in the User Settings mode.
Select an item, press and hold the OK
button.
For more details about each system,
refer to this Owner’s Manual.
Information
When the infotainment system is applied,
only the User’s Setting mode on the
infotainment system is supported but the
User’s Setting mode on the instrument
cluster is not supported.
CN7 N HMA 4.indd 4-31 2021-09-14  9:32:56

04
4-33
2. Door
ItemsExplanation
Auto Lock• Enable on Shift: All doors will be automatically locked if the
automatic transmission/dual clutch transmission shift lever is
moved from the P (Park) position to the R (Reverse), N (Neutral), or
D (Drive) position. (Only when the engine is running)
• Enable on Speed: All doors will be automatically locked when the vehicle speed exceeds 9.3mph (15km/h).
• Disable : The auto door lock operation will be deactivated.
Auto Unlock • On Shift to P: All doors will be automatically unlocked if the
automatic transmission/dual clutch transmission shift lever is
moved to P (Park) position. (Only when the engine is running)
• On key out/Vehicle Off : All doors will be automatically unlocked. When the Engine Start/Stop button is set to the OFF position.
• Disable : The auto door unlock operation will be canceled.
Two Press Unlock
• Off: The two press unlock function will be deactivated. Therefore, all doors will unlock if the door unlock button is pressed.
• On: Only the driver’s door will unlock if the door unlock button is pressed. When the door unlock button is pressed again within 4
seconds, the remaining doors will unlock.
Smart TrunkTo activate or deactivate the smart trunk.
For more details, refer to “Smart trunk” in chapter 5.
3. Lights
Items Explanation
IlluminationTo adjust the illumination level.
- Level 1~20
One Touch
Turn Signal • Off: The one touch turn signal function will be deactivated.
• 3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times
when the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight Delay• To activate or deactivate the headlamp delay function.
For more details, refer to “Lighting” in chapter 5.
High Beam Assist• To activate or deactivate High Beam Assist.
For more details, refer to “High Beam Assist (HBA)” in chapter 5.
CN7 N HMA 4.indd 4-33 2021-09-14  9:32:57

05
5-37
WARNING
Before programming HomeLink® to a
garage door opener or gate operator,
make sure people and objects are out
of the way of the device to prevent
potential harm or damage. Do not
use the HomeLink® with any garage
door opener that lacks the safety
stop and reverse features required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an
object - signaling the door to stop and
reverse - does not meet current U.S.
federal safety standards. Using a garage
door opener without these features
increases the risk of serious injury or
death.
For more information, contact
HomeLink® at www.homelink.com, or
call Home-Link customer support at
1-800-355-3515.
It is also recommended that a new
battery be replaced in the handheld
transmitter of the device being trained
to HomeLink® for quicker training and
accurate transmission of the radio
frequency.1. Programming HomeLink
®
The following steps show how to
program HomeLink. If you have any
questions or are having difficulty
programming your HomeLink buttons,
refer to the HomeLink website or call the
HomeLink customer support toll-free
number. Do this, before going back to
the dealer who sold you the car.
• Visit the HomeLink website at: www.
homelink.com. Then at the top of the
page, choose your vehicle make. Then
watch the You Tube video, and/or
access additional website information.
• If you choose to access the website via your cell phone, scan the QR code.
• Or, call HomeLink customer support at 1-800-355-3515 (Please have the
vehicle make/model AND the opener
device make/model readily available.)
CN7 N HMA 5.indd 5-37 2021-09-06  3:06:18

Convenience Features5-38
1) Programming Preparation
OCN7050084NOCN7050084N
1. When programming a garage door opener, it is advised to park the
vehicle outside of the garage.
2. It is recommended that a new battery be placed in the handheld transmitter
of the device being programmed to
HomeLink for quicker training and
accurate transmission of the radio-
frequency signal.
3. Set the Engine Start/Stop button to the ACC (Accessory) position for
programming of HomeLink.
2) Programming a New HomeLink®
OCN7N051214NOCN7N051214N
1. Press and release the HomeLink button (1), (2) or (3), you would like
to program. The HomeLink indicator
light (7) will flash orange slowly (if
not, perform the steps of “Erasing
HomeLink Buttons” section, and start
over).
OCN7N051215NOCN7N051215N
2. Position the garage door opener remote 1 – 3 inches (2 – 8cm) away
from the HoleLink buttons.
CN7 N HMA 5.indd 5-38 2021-09-06  3:06:18