2022 FORD F-550 service reset

GENERAL MAINTENANCE
INFORMATION
Why Maintain Your Vehicle?
Carefully following the maintenance
schedule helps protect against major repair
expenses resulting from neglect or
inadequate maintenance and may help to
increase the value of your vehicle when
you sell or trade it. Keep all receipts for
completed maintenance with your vehicle.
It is important that you have your vehicle
serviced at the proper times. These
intervals serve two purposes: first is to
maintain the reliability of your vehicle and
the second is to keep the cost of owning
your vehicle down.
It is your responsibility to have all
scheduled maintenance performed and to
make sure that the materials used meet
the specifications identified in this owner's
manual. See Capacities and
Specifications (page 467).
Failure to perform scheduled maintenance
and regularly inspect your vehicle may
result in vehicle damage not covered by
the vehicle Warranty.
Why Maintain Your Vehicle at Your
Dealership?
Our Genuine Replacement Parts
Dealerships stock our parts and our
authorized branded re-manufactured
replacement parts. These parts meet or
exceed our specifications. Parts installed
at your dealership carry a nationwide
24-month or unlimited mile (kilometer)
parts and labor limited warranty.
If you do not use our authorized parts they
may not meet our specifications and could
affect emissions compliance. Protecting Your Investment
Maintenance is an investment that pays
dividends in the form of improved
reliability, durability and resale value. To
maintain the proper performance of your
vehicle and its emission control systems,
make sure you have scheduled
maintenance performed at the designated
intervals.
Your vehicle comes with the Intelligent
Oil-Life Monitor system, a message
appears in the information display at the
proper oil change interval. This interval
may be up to one year or
10,000 mi
(16,000 km), hybrid vehicles could exceed
10,000 mi (16,000 km).
When the oil change message appears in
the information display, it is time for an oil
change. Make sure you perform the oil
change within two weeks or
500 mi
(800 km) of the message appearing. Make
sure to reset the Intelligent Oil-Life Monitor
after each oil change. See
Resetting the
Engine Oil Change Reminder (page 401).
If your information display resets
prematurely or becomes inoperative, you
should perform the oil change interval at
six months or
5,000 mi (8,000 km) from
your last oil change. Never exceed one year
or
10,000 mi (16,000 km) between oil
change intervals.
You can drive high performance vehicles
in such a way that may lead to higher oil
consumption including extended time at
high engine speeds, high loads, engine
braking, hard cornering maneuvers, track
and off-road usage. Under these
conditions, oil consumption of
approximately 1 quart per 500 miles (1 liter
per 800 km) is possible. Check the engine
oil level at every refueling and adjust to
maintain proper levels to avoid engine
damage.
622
2022 Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 202103, First-Printing Scheduled Maintenance

At Every Oil Change Interval as Indicated by the Information Display
1
Inspect the front axle and U-joints. Lubricate any grease fittings. Four-wheel drive
vehicles.
Inspect the steering linkage, ball joints, suspension, tie-rod ends, driveshaft and the U-
joints. Lubricate any grease fittings.
1 Do not exceed one year/10,000 mi (16,000 km) or 350 engine hours between service
intervals.
2 Reset the Intelligent Oil-Life Monitor after engine oil and filter changes.
3 Reset the engine air filter information monitor after you replace the air filter.
4 Rotate the front wheels on vehicles with dual rear wheels when specified. Only rotate
the rear wheels if you notice unusual wear. Brake Fluid Maintenance
1
Change the brake fluid. 2
Every three years
1 Perform this maintenance item every three years. Do not exceed the designated time
for the interval.
2 Brake fluid servicing requires special equipment available at your authorized dealer. Other Maintenance items
1
Replace the cabin air filter.
Every
20,000 mi
(32,000 km)
Replace the engine air filter. 2
Every
30,000 mi
(48,000 km) Replace the engine-mounted and frame-mounted fuel filters.
Inspect the engine and secondary cooling system coolant
concentration freeze-point protection, additive corrosion
inhibitor strength, coolant level, and hoses. Add coolant
additive if necessary.
Replace the engine air inlet foam filter.
Every
50,000 mi
(80,467 km)
Replace the front wheel bearing grease and grease seal if
using non-sealed bearings. Two-wheel drive vehicles.
Every
60,000 mi
(96,000 km)
Inspect the accessory drive belt or belts. 3
At
90,000 mi
(144,000 km)
627
2022 Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 202103, First-Printing Scheduled Maintenance

Operating in Sustained Ambient Temperatures Below -9°F (-23°C) or Above 100°F (38°C)
Change the engine oil and filter as indicated by the
information display, and perform the services listed in the
scheduled maintenance chart.
As required
Replace the engine-mounted and frame-mounted fuel
filters.
Every 15,000 mi
(24,000 km), six months or
600 engine hours
Replace the wheel bearing grease and grease seals if using
non-sealed bearings. (Two-wheel drive vehicles)
Every
30,000 mi
(48,000 km) Operating in Dusty or Sandy Conditions (Such as Unpaved or Dusty Roads)
Rotate the tires, inspect the tires for wear and measure
tread depth.1
Every
7,500 mi (12,000 km)
Inspect the brake system pads and rotors.
Inspect the air filter restriction gauge. Replace the filter if
necessary.
Inspect the steering and suspension ball joints and tie rods.
Lubricate any grease fittings.
Change the engine oil and filter. 2
Every 7,500 mi (12,000 km),
six months or 300 engine
hours
Inspect and lubricate the U-joints.
Replace the engine-mounted and frame-mounted fuel
filters.
Every
15,000 mi
(24,000 km), 6 months or
600 engine hours
Replace the air inlet foam filter.
Every
30,000 mi
(48,000 km) Replace the wheel bearing grease and grease seals if using
non-sealed bearings. (Two-wheel drive vehicles)
1 Rotate the front wheels on vehicles with dual rear wheels when specified. Rotate the
rear wheels if unusual wear is noted.
2 Reset the Oil Change Reminder after engine oil and filter changes.
633
2022 Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 202103, First-Printing Scheduled Maintenance

Selective Catalytic Reduction System
Precautions...................................................217
Selective Catalytic Reduction System Requirements..............................................218
Selective Catalytic Reduction System............................................................217
Filling the Selective Catalytic Reduction
System Tank.................................................... 219
Selective Catalytic Reduction System – Troubleshooting............................................. 221
Selective Catalytic Reduction System – Troubleshooting.........................................221
Selective Catalytic Reduction System – Information Messages.................................. 221
Selective Catalytic Reduction System – Warning Lamps............................................... 221
Sending and Receiving a Text Message......................................................605
Sensitive Locking Mode
................................51
How Does Sensitive Locking Mode
Work...................................................................... 51
What is Sensitive Locking Mode...................... 51
Service Data
.....................................................25
Setting a Destination..................................610 Setting a Destination Using a Point of
Interest................................................................ 611
Setting a Destination Using a Predictive Destination........................................................ 611
Setting a Destination Using a Recent Destination........................................................ 611
Setting a Destination Using a Saved Destination........................................................ 611
Setting a Destination Using the Map Screen............................................................... 610
Setting a Destination Using the Text Entry Screen............................................................... 610
Setting a Memory Preset
..........................526
Settings Data...................................................26
Settings...........................................................582
Setting the Adaptive Cruise Control Gap.................................................................276
Setting the Adaptive Cruise Control Speed.............................................................275
Setting the Blower Motor Speed............150
Setting the Clock and Date......................526
Setting the Cruise Control Speed..........270
Setting the Hill Descent Speed..............254
Setting the Temperature...........................150 Setting the Trail Control Speed..............252
Setting the Wake Word............................600
Setting Up the Trailer Backup Assistance
for a Conventional Trailer......................339
Applying the Trailer Reversing Aid Sticker................................................................ 341
Calibrating the System.................................... 342
Configuring the Trailer..................................... 339
Setting Up the Trailer Backup Assistance for a Fifth-Wheel or Gooseneck
Trailer.............................................................343
Calibrating the System.................................... 345
Configuring the Trailer...................................... 343
Trailer Sensor Installation.............................. 344
Setting Up Trailer Reverse Guidance for a Conventional Trailer.............................357
Applying the Trailer Reverse Aid Sticker............................................................... 359
Calibrating the System................................... 360
Configuring the Trailer...................................... 357
Setting Up Trailer Reverse Guidance for a Fifth-Wheel or Gooseneck
Trailer............................................................360
Calibrating the System.................................... 362
Configuring the Trailer..................................... 360
Trailer Sensor Installation............................... 361
Shifting Your Vehicle Into Gear...............224
Sitting in the Correct Position..................158
Snow Plowing Precautions......................376
Snow Plowing...............................................376
Sounding the Panic Alarm
..........................70
Special Operating Conditions Scheduled Maintenance - Diesel
...............................631
Special Operating Conditions Scheduled Maintenance - Gasoline
........................636
Speed Control See: Cruise Control............................................ 270
Stability Control Indicator
.........................251
Stability Control...........................................249
Starter Switch See: Ignition Switch............................................ 191
Starting and Stopping the Engine – Precautions...................................................191
Starting and Stopping the Engine...........191 Automatic Engine Stop.................................... 196
Engine Block Heater.......................................... 194
Starting and Stopping the Engine – Troubleshooting............................................. 198
732
2022 Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 202103, First-Printing Index