5
Precautions related to high
voltage
Your E- MEHARI uses a high voltage
b attery that can reach 450 volts.
The temperature of the system can be
high during and after starting and when
the vehicle is switched off. Be aware of the
high voltage.
For more information on High voltage
safety , refer to the corresponding section.
Never dismantle, remove, replace or
handle the high voltage components,
cables and connectors as they can cause
serious burns and an electric shock which
could cause serious or fatal injuries.
The high voltage cables are orange in colour.
There is no part of the high voltage system of
your E-MEHARI that can be replaced by the
user; this must only be done by a
qualified
professional.
Take your E-MEHARI to a
CITROËN
authorised repairer or a
qualified professional
for all maintenance and repair of the vehicle's
high voltage system.
Precautions related to road
accidents
In the event of collision
- I f you can drive the vehicle: move the
vehicle to the side of the road, put the
drive selector at position "N" (neutral),
apply the manual parking brake and
switch off your E-MEHARI.
-
C
arr y out a visual check of the
condition of your E-MEHARI to verify
that no high voltage cable or component
is visible. To avoid injury: never touch the
cables, the connectors, the charger, the
LMP
® battery or any other part of the high
voltage system on your E-MEHARI. You
could suffer an electric shock if exposed
cables are visible, whether you are inside
or outside the vehicle. Never touch visible
electric cables.
-
I
f the vehicle has sustained a heavy
impact to the floor: stop the vehicle in
a
safe area and check the condition of
your E-MEHARI's floor.
-
I
f a
fire has star ted in your E- MEHARI:
get out of the vehicle immediately. To
extinguish the fire, use an extinguisher
specially designed for electrical fires of
the ABC, BC or C type. Use of water or
the wrong type of extinguisher may cause serious or even fatal injuries due to electric
shock.
-
I
f your vehicle has to be recovered,
call a CITROËN authorised repairer or
a qualified professional and have the front
wheels lifted. If the vehicle is towed with
the front wheels on the ground, the traction
motor may produce electricity. This can
damage the systems on your E-MEHARI and
cause a fire.
-
I
f you cannot safely check the condition
of your vehicle because of the level of
damage sustained, do not touch your
vehicle. Contact the emergency services
and specify that you have an electric vehicle.
Inform the first to arrive at the scene of the
accident that it concerns an electric vehicle.
-
I
n the event of an accident: you must
contact a
CITROËN authorised repairer
or a
qualified professional who will send
a
person able to work on a damaged electric
vehicle.
-
O
bserve the driving regulations on the
safety of vehicles and third par ties.
.
Over view
36
Power cut-off in the event
of an impact
In the event of an impact or accident, an impact
detection system on your E-MEHARI cuts off
the vehicle's high voltage power supply.
Anti-theft protection/
Electronic immobiliser
Your E-MEHARI is fitted with an electronic
immobiliser.
This immobiliser is directly linked to your
personal RFID key ring.
Only your personal RFID key ring gives
authorisation to use your E-MEHARI.Check that your key is at the STOP
position of the starting switch or removed
from the starting switch before locking
your E-MEHARI.
Assistance call
Your E-MEHARI is equipped with an assistance
call control button.
This ser vice puts you in 24/7 contact with an
adviser trained to help you take the appropriate
action and who will have answers for situations
where you may encounter problems.
The assistance call button is connected to
a
hands-free communication system, allowing
you to remain attentive while driving your
vehicle.
To call CITROËN ASSISTANCE or end the call,
press the assistance call button.
If you receive a
call while you are in the vehicle,
the system answers it automatically.
ABS – ESP
These systems are additional aids when
driving in critical situations, allowing the
behaviour of the vehicle to be adapted to
the driver's wishes.
However these systems do not inter vene
in place of the driver.
They cannot extend the vehicle's limits
and should not encourage you to drive
f a s t e r.
They cannot, in any circumstances,
replace the need for vigilance, or
the responsibility of the driver when
manoeuvring the vehicle (the driver must
always be watchful for sudden events that
could occur while driving).
ABS (anti-lock braking
system)
The ABS prevents locking of the wheels under
heavy braking, so optimising the stopping
distance and allowing control of the vehicle to
be retained.
In these conditions, avoidance manoeuvres
during braking are therefore possible.
In addition, this system optimises the stopping
distance on sur faces offering poor grip (wet
roads, etc.).
Safety
49
Use the hazard warning lamps only to
signal unusual action on your part and
only if your vehicle presents a safety
risk to other drivers: an emergency stop
because of a
vehicle failure, the need to
drive abnormally slowly, etc...
While the hazard warning lamps are on,
your E-MEHARI's direction indicators can
no longer be used to indicate changes of
direction.
Horns and audible
warnings
" Standard " horn
To use the "standard" horn: press the central
hub of the steering wheel.
Horn for pedestrians
Operation
Your E-MEHARI produces no noise from its
electric motor.
It has a
special horn for warning pedestrians of
your approach.
This horn sounds when the vehicle's speed is
between approximately 0.6
and 18 mph (1 and
30
km/h).
Deactivation
In certain driving conditions you can deactivate
the system.
Make a
short press on the end of the wiper
control stalk.
Another press reactivates the system.
Before deactivating the system, make
sure that you are not driving in an area
frequented by pedestrians. The system is reactivated automatically at
every new start.
Audible warning emergency
services
Your E-MEHARI has an audible warning
system should there be a
problem with the
LMP
® battery fitted to the vehicle. A message
also appears on the dashboard instrument
panel.
For more information on the Instruments and
indicators on your E-MEHARI , refer to the
corresponding section.
If operation of this system is triggered (the
audible warning cannot be switched off), you
must stop the vehicle as soon as it is safe to do
so, get out of the vehicle, and call CITROËN
ASSISTANCE.
Please tell the call handler that your
vehicle is an electric vehicle.
Stay at least ten metres away from your
vehicle when an LMP
® battery warning
has been triggered.
An LMP
® battery is an energy storage
device.
5
Safety
51
The following actions may increase the
risk of losing control of the vehicle if
the tyres are not properly inflated:
-
s
udden harsh application of the
brakes,
-
r
eleasing the accelerator pedal
suddenly,
-
t
urning the steering wheel too quickly.
Note: The vehicle generally moves
towards or pulls in the direction of the
under-inflated tyre.
Never drive under the influence of alcohol
or drugs.
The presence of alcohol or drugs in your
bloodstream reduces coordination, slows
reaction and impairs judgement.
Driving after taking alcohol or drugs
increases the risk of being involved in
an accident causing injuries, suffered by
yourself or inflicted on others.
Note also that, in the event of an accident,
there is a
risk that the alcohol or drugs
will increase the severity of the injuries
suffered.
Never take medicines that might affect
your ability to drive and control the vehicle
before setting off. Never leave the starting switch in the
"MAR" position for a
long period when the
vehicle is not being used.
This can reduce the range of the vehicle.
When you stop your vehicle on a
rising
slope, do not hold the vehicle by pressing
the accelerator.
Always use the brake pedal for this.
Starting/Switching off the
vehicle
The starting switch is located on the right-hand
side under the steering wheel. Before moving off, check that the position
of the drive selector agrees with your
intention.
The drive direction is indicated on the
drive selector by illumination of the green
ring.
Starting switch
(1)
STOP position: your E-MEHARI is
stationary.
(2) MAR position: the 12
V battery is
connected and the accessories can be
used.
(3) AV V position: switching on the electric
motor.
6
Driving
62
Stopping the charge
The charging nozzle will only disconnect if
your E-MEHARI is unlocked using the personal
RFID key ring.
1.Press the charging shut-off button in
the charging socket panel, wait until the
charging nozzle is unlocked then pull it
out. If you do not remove the charging
nozzle within the next 10
seconds, the
vehicle star ts charging again. You will
then have to star t the operation again.
2. Refit the protective cover on the charging
nozzle.
3. Disconnect the plug from the power point.
4.
Charging starts automatically. The
CHARGING indicator lamp on the control
unit comes on to indicate that charging is
in progress.
Several signals indicate that the vehicle's
battery is charging:
-
T
he right-hand rear lamp flashes 5
times at
the start of the charge.
-
T
he charging indicator lamp (in the form of
a
green plug) in the display screen flashes
continuously.
Flashing green continuously: charging is in
progress.
Fixed green: charging is complete.
-
T
he indicator lamp on the charging shut-off
button gives the same indication as the
charging indicator lamp on the display.
Flashing green continuously: charging is in
progress.
Fixed green: charging is complete.
If the central screen is lit, the message
"Charging" will be displayed as well as an
estimate of the charge time remaining. Notes on charging
Once you have connected your
E-MEHARI, you have 30
seconds to lock
the vehicle.
After this, your E-MEHARI will remain
unlocked.
However, as a
security measure, the
driving permissions will be cancelled.
-
I
f you wish to use your E-MEHARI
again, offer up your key ring in front of
the RFID reader to regain the driving
permissions.
-
T
o lock your E-MEHARI, scan twice.
The 1
st time will be interpreted as
a
recovery of the driving permissions, the
2
nd time will lock the vehicle.
Practical information