Page 33 of 68
31
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
AUTOMATIC AIR CONDITIONING - VEHICLES EQUIPPED WITH 12.3-in DISPLAY
Temperature control
(driver side)
Temperature control
(driver side)Option switch*
Temperature control
(front passenger side)
Temperature control
(front passenger side) “SYNC” switch
Air conditioning ON/OFF Fan speed
Fan speedRecirculate cabin air
(outside air when OFF)
ECO mode
* “Option” switch
Press the “Option” switch to display the option control screen.
Windshield defogger AUTO switch (Automatic climate control)
Climate control OFF
S-FLOW switchOutside rear view mirror defogger/
Rear window defogger
Return to previous
screen
Refer to the Owner’s Manual for more details.
Airflow vent:
Page 34 of 68
32
FEATURES & OPERATIONS
Heated steering wheel (if equipped)
The vehicle must be on for use.
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to the Owner’s Manual for limitations and more details.
For programming assistance, contact HomeLink
® at 1-800-355-3515, or visit
http://www.homelink.com/toyota.
*
HomeLink® is a registered trademark of Gentex Corporation.
Garage door opener (HomeLink®)* (if equipped)
HomeLink® icon
ButtonsHomeLink® indicator light
Vehicles with auto anti-glare inside rear view mirror
Garage door operation
indicatorsGarage door operation
indicators
HomeLink
® logo:
Appears while HomeLink®
is operating. HomeLink® indicator light:
Illuminates above each
button selected.HomeLink
® icon
Vehicles with Digital Rearview Mirror
HomeLink® buttons Menu buttonsSetting icon
Page 35 of 68
33
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Vehicle Stability Control (VSC)/
TRAC OFF switch
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like
mud, dirt or snow. While the vehicle is stopped, press switch to disable the TRAC
system.
To disable both VSC and TRAC systems, press and hold the switch for at least 3
seconds.
Refer to the Owner’s Manual for limitations and more details.
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button and
select “Display.” Select “Camera” to adjust the screen contrast and brightness.
Refer to “Toyota parking assist monitor precautions” section in the Navigation and
Multimedia System Owner’s Manual for limitations and more details on this system.
Page 36 of 68
34
FEATURES & OPERATIONS
The Bird’s Eye View Camera with Perimeter Scan function assists the driver in
viewing the surroundings, when operating at low speeds or parking, by combining
front, side and rear cameras and displaying an overhead image on the screen.
To display the moving view/see-through view screen, press the camera switch when
the shift lever is in the “P” position and the Intuitive parking assist is enabled.
Refer to the Navigation and Multimedia System Owner’s Manual for limitations and
more details.
Moving view See-through view
Body color setting switch Body color setting switch
Display mode change switch Display mode change switchRotation pause switch Rotation pause switch
Bird’s Eye View Camera with Perimeter
Scan
(if equipped)
Page 37 of 68
35
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
The Blind Spot Monitor is a system that has two functions:
t 5 I F # M J O E 4 Q P U . P O J U P S G V O D U J P O B T T J T U T U I F E S J W F S J O N B L J O H U I F E F D J T J P O X I F O
D I B O H J O H M B O F T
t 5 I F 3 F B S $ S P T T 5 S B G G J D " M F S U G V O D U J P O B T T J T U T U I F E S J W F S X I F O C B D L J O H V Q
The system is designed to use radar sensors to detect vehicles traveling in the
Venza’s blind spot. If a vehicle is detected, the driver will be alerted via the outside
rear view side mirror indicators.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear of the Venza
is detected, the outside rear view mirror indicators will flash. Also, the RCTA icon
for the detected side will be displayed on the audio system display, and the RCTA
buzzer will sound.
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
Buzzer*
* RCTA only Meter control
switches
Monitor screen
display* Indicator
Indicator
Press “ ” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “” or “RCTA” then press “.”
The setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “On/Off” setting function and
then press “
.”
1 S F T T i
” to go back to the menu.
The BSM function and the RCTA function are automatically enabled each time the
vehicle is turned on.
Refer to the Owner’s Manual for limitations and more details on this system before
attempting to use it.
SYSTEM ON/OFF
Page 38 of 68
36
FEATURES & OPERATIONS
Press “ ” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and press “” to select the desired setting.
1 S F T T i
” to go back to the menu.
5 I F T Z T U F N X J M M D P O U J O V F J O U I F M B T U T U B U F J U X B T J O 0 / P S 0 ' '
X I F O U I F F O H J O F J T
started again.
Refer to all of the section “Parking Support Brake function” (static objects and rear-
crossing vehicles) in the Owner’s Manual for limitations and more details.
When traveling at a low
speed and the brake
pedal is not depressed,
or is depressed late.When the accelerator
pedal is depressed
excessively.When the vehicle moves in
the unintended direction
due to the wrong shift
position being selected.
When reversing, a vehicle is
approaching and the brake pedal is
not depressed, or is depressed late.
The Front and Rear Parking Assist with Automated Braking consists of the following
functions that operate when driving at a low speed or backing up, such as when
parking. When the system determines that the possibility of a collision with a
detected object is high, a warning operates to urge the driver to take evasive
action. If the system determines that the possibility of a collision with a detected
object is extremely high, the brakes are automatically applied to help avoid the
collision or help reduce the impact of the collision.
For the static object
For the rear-crossing vehicles
CHANGE SETTINGS
Front and Rear Parking Assist with
Automated Braking (PA w/AB)
(if equipped)
FUNCTIONS
Page 39 of 68
37
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
If the sensors detect an obstacle, the buzzer and MID or navigation system
display inform the driver of the approximate position and distance of the obstacle
C Z J M M V N J O B U J O H D P O U J O V P V T M Z G B S
P S C M J O L J O H O F B S
% F Q F O E J O H P O Z P V S " V E J P
Multimedia system, you can adjust settings.
Press “
” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Intuitive parking assist on/off”
setting function and then press “
.”
1 S F T T i
” to go back to the menu.
Refer to the Owner’s Manual for limitations and more details.
Front
center sensor
Rear
center sensor Corner sensors
(front)Corner sensors
(front)
Corner sensors
(rear)Corner sensors
(rear)
Intuitive Parking Assist (if equipped)
SYSTEM ON/OFF
Page 40 of 68
38
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 5 4 4
J T B T F U P G B D U J W F T B G F U Z U F D I O P M P H J F T E F T J H O F E
to help mitigate or prevent collisions across a wide range of traffic situations, in
certain conditions. TSS 2.0 is designed to help support the driver’s awareness,
decision making and vehicle operation contributing to a safe driving experience.
5 H I H U W R W K H 2 Z Q H U
