2021 TOYOTA TACOMA navigation

833-1. Basic operation
3
Navigation system
5Check that the traffic informa-
tion is displayed.
“Detail”: Select to display detailed
traffic information.
1Select on the map
screen.
2Select “Traffic Information”.
3Check that the traffic informa-
tion is displayed.
●The icons indicate traffic incidents
such as construction, accidents,
etc. Select an icon to hear more
detail by voice.
●The arrows indicate the flow of
traffic. The color changes depend-
ing on the speed.
Displaying traffic informa-
tion on the map

843-2. Destination search
3-2.Destination search
The destination screen enables
to search for a destination. The
destination screen can be
reached by the following meth-
ods:
■From the map screen
1Press the “MAP” button.
2Select .
3Follow the steps in “From the
menu screen” from step 3.
(P. 8 4 )
■From the menu screen
1Press the “MENU” button.
2Select “Destination”.
3Select the desired search
method.Select to set a destination by
home. (P.85)
Select to search for a desti-
nation by entering keywords.
(P.85)
Select to search for a desti-
nation via the Toyota
response center.
* (P.288)
Select to search for a desti-
nation from a registered entry
in “Favorites”. (P. 8 6 )
Select to search for a desti-
nation from recent set desti-
nations. (P. 8 6 )
Select to search for a desti-
nation from emergency ser-
vice points. (P.86)
Select to search for a desti-
nation by address. (P. 8 7 )
Select to search for a desti-
nation by point of interest.
(P.88)
Select to search for a desti-
nation from contact data
which had been transferred
to the navigation system from
a registered Bluetooth
®
phone. (P.87)
*: This function is not made avail-
able in some countries or areas.
●To hide the destination screen,
touch any part of the map screen.
Destination search
operation
Destination screen
A
B
C
D
E
F
G
H
I

853-2. Destination search
3
Navigation system
The selected state (province)
can be changed to set a desti-
nation from a different state
(province) by using “Address” or
“Point of Interest”.
1Display the destination
screen. (P.84)
2Select “Address” or “Point of
Interest”.
3Select “Change State/Prov-
ince”.
If a state (province) has not
been selected yet,
“State/Province” screen is dis-
played directly.
4Select the desired state
(province).
To change countries, select
“Change Country”.
To use this function, it is neces-
sary to register a home address.
(P.102)
1Display the destination
screen. (P.84)2Select “Home”.
The navigation system per-
forms a search for the route
and the route overview is dis-
played. (P.92)
The destination can be
searched by entering various
keywords.
1Display the destination
screen. (P. 8 4 )
2Select “Search”.
3Enter characters on the key-
board.
4Select “Search”.
5When there is more than 1
result, select the desired item
from the list.
: Select to display updated infor-
mation about the selected entry.
This function is displayed only
when there is information from the
Cloud.
●To search for a facility name using
multiple search words, put a
space between each word.
●Search results may differ depend-
ing on the connected services
subscription status and communi-
Selecting search area
Setting home as destina-
tion
Searching by keyword

873-2. Destination search
3
Navigation system
2Select “Emergency”.
3Select the desired emer-
gency category.
4Select the desired destina-
tion.
●The navigation system does not
guide in areas where route guid-
ance is unavailable. (P. 1 1 4 )
To use this function, it is neces-
sary to have contact data which
had been transferred to the nav-
igation system from a registered
Bluetooth
® phone. (P.250)
1Display the destination
screen. (P.84)
2Select “Contacts”.
3Select the desired contact.
4Select “Addresses”.
5Select the desired address.6Follow the steps in “Search-
ing by keyword” from step 4.
(P.85)
●This function may not be available
depending on the type of Blue-
tooth
® phone.
1Display the destination
screen. (P. 8 4 )
2Select “Address”.
3Enter a house number and
select “Search”.
4Enter a street name and
select “Search”.
5Select the desired street
name.
6Enter a city name and select
“Search”.
7Select the desired city name.
If multiple locations with the
same address exist, the
address list screen will be dis-
played. Select the desired
address.
●A street name can be searched
using only the body part of its
name.
For example: S WESTERN AVE
Searching by contact
Searching by address

893-2. Destination search
3
Navigation system
1Select “Category”.
2Select the desired search
point.
Select to search for POIs
near your current position.
Select to search for POIs
along the set route.
Select to search for POIs
near a specific city center.
(P. 8 9 )
Select to search for POIs
near a destination.
When more than 1 destina-
tion has been set, a list will
be displayed on the screen.
Select the desired destina-
tion.
3Select the desired POI cate-
gory.
If there is more than 1 result
for the selected category, a
detailed list will be displayed.
Select “Other POIs” to select
other than default POI catego-
ries. The following button can
be displayed.
“List All Categories”: Select to dis-play all POI categories.
“Favorite POI Categories”: Select to
use the 6 POIs that have been pre-
viously set. (P.107)
4Select the desired POI.
●The names of POIs located within
approximately 200 miles (320 km)
from the selected search point can
be displayed. They are displayed
up to 200 names.
1Select “Near a City Center in
XX
*”.
2Enter a city name and select
“Search”.
“Last 5 Cities”: Select the desired
city name from the list of the last 5
cities.
3Select the desired city name.
4Select “OK” when the city
center map screen is dis-
played.
5Follow the steps in “Search-
ing by category” from step 3.
(P.89)
*: XX represents the selected
search area name.
●If the navigation system has never
been used, selecting the city
name from “Last 5 Cities” will not
be available.
1Select “Phone #”. Searching by category
A
B
C
D
:KHQ

913-2. Destination search
3
Navigation system
1Select “Go” on the confirm
destination screen.
For details about this screen:
P. 9 1
2Select “OK” on the route
overview screen.
For details about this screen:
P. 9 2
●The route for returning may not be
the same as that for going.
●The route guidance to the destina-
tion may not be the shortest route
or a route without traffic conges-tion.
●Route guidance may not be avail-
able if there is no road data for the
specified location.
●When setting the destination on a
map with a scale more than 0.5
miles (800 m), the map scale
changes to 0.5 miles (800 m)
automatically. If this occurs, set
the destination again.
●If a destination that is not located
on a road is set, the vehicle will be
guided to the point on a road near-
est to the destination. The road
nearest to the selected point is set
as the destination.
Select to search for the route.
(P.91)
• If a destination has already been
set, “Go Directly” and “Add to
Route” will be displayed.
“Go Directly”: Select to delete the
existing destination(s) and set a
new one.
Starting route guid-
ance
When the destination is set,
the entire route map from
the current position to the
destination is displayed.
Starting route guidance
WA R N I N G
●Be sure to obey traffic regula-
tions and keep road conditions
in mind while driving. If a traffic
sign on the road has been
changed, the route guidance
may not indicate such changed
information.
Confirm destination
screen
A

933-2. Destination search
3
Navigation system
tive route.
Select to display the informa-
tion about the 3 routes.
(P. 9 3 )
1Select “Info”.
2Check that the 3 routes infor-
mation screen is displayed.
Time necessary for the entire
trip
Distance of the entire trip
Distance of the toll road
Distance of the freeway
Distance of the ferry trip
A list of turn information from the
current position to the destina-
tion can be displayed.
1Select “Turn List”.2Check that the turn list is dis-
played.
Current position
Distance to the next turn
Turn direction at the intersec-
tion
Select to display the map of
the selected point.
●Not all road names on the route
may appear on the list. If a road
changes its name without requir-
ing a turn (such as on a street that
runs through 2 or more cities), the
name change will not appear on
the list. The street names will be
displayed in order from the start-
ing point, along with the distance
to the next turn or the destination.
Destinations can be added,
reordered or deleted, and condi-
tions for the route to the destina-
tion can be changed.
1Select “Edit Route”. Displaying 3 routes informa-
tion
Displaying turn list
E
A
B
C
D
E(GLWLQJURXWH
A
B
C
D

943-2. Destination search
2Select the desired item.
Select to add destinations.
(P. 9 4 )
Select to delete destinations.
(P. 9 4 )
Select to reorder destina-
tions. (P.100)
Select to set route prefer-
ences. (P.100)
When the vehicle is stopped
1Select “Add”.
2Search for an additional des-
tination in the same way as a
destination search. (P. 8 4 )
Up to 5 destinations can be
set.
3Select “Add” at the position in
the route which you want to
add the destination.
While driving
1Select “Add”.
2Search for an additional des-
tination in the same way as a
destination search. (P. 8 4 )
Up to 5 destinations can be set.
3Select “Beginning” or “End”.
1Select “Delete”.
2Select “Yes” when the confir-
mation screen appears.
If more than 1 destination has
been set, select the destina-
tion(s) to be deleted. (The
navigation system will recal-
culate route(s) to the remain-
ing set destination(s).)
*: This function is not made avail-
able in some countries or areas.
When starting route guidance or
rerouting, a route can be pro-
vided automatically by the
Cloud. This function is available
when dynamic route setting is
enabled. (P.106) Adding destinations
A
B
C
D
'HOHWLQJGHVWLQDWLRQV
$URXWHIURPWKH&ORXG