2021 TOYOTA RAV4 bulb

6207-3. Do-it-yourself maintenance
High mounted stoplight
 License plate lights
 Outer foot lights (if equipped)
■LED lights
The lights other than the following
lights each consist of a number of
LEDs. If any of the LEDs burn out,
take your vehicle to your Toyota
dealer to have the light replaced.
●Front turn signal lights
●Parking lights
●Front side marker lights
●Fog lights (if equipped)
●Rear turn signal lights
●Back-up lights
■Condensation build-up on the
inside of the lens
Temporary condensation build-up
on the inside of the light lens does
not indicate a malfunction. Contact
your Toyota dealer for more infor-
mation in the following situations:
●Large drops of water have built up
on the inside of the lens.
●Water has built up inside the light.
■Front turn signal/parking
lights
1 Turn the bulb base counter-
clockwise. 2
Remove the light bulb.
3 Install a new light bulb then
install the bulb base to the
light unit by inserting it and
turning the bulb base clock-
wise.
■Front side marker lights
1 Turn the bulb base counter-
clockwise.
Replacing light bulb

6217-3. Do-it-yourself maintenance
7
Maintenance and care
2Remove the light bulb.
3 Install a new light bulb then
install the bulb base to the
light unit by inserting it and
turning the bulb base clock-
wise.
■Fog lights (if equipped)
1 To allow enough working
space, turn the steering
wheel. 2
Remove the screws.
3 Remove the screws and
clips, partly remove the
fender liner.
4 Unplug the connector

6227-3. Do-it-yourself maintenance
5Turn the bulb base counter-
clockwise.
6 Set the new light bulb.
Align the 3 tabs on the light bulb
with the mounting, and insert. Turn
it clockwise to set.
7 Set the connector.
Shake the bulb base gently to
check that it is not loose, turn the
front fog lights on once and visually
confirm that no light is leaking
through the mounting.
8Reinstall the fender liner.
9 Reinstall the screws.
■Rear turn signal lights
1 Open the back door and
remove the cover.

6237-3. Do-it-yourself maintenance
7
Maintenance and care
2Remove the screws and
remove the unit.
Remove the lamp assembly by pull-
ing it directly backward from the
rear of the vehicle.
3Turn the bulb base counter-
clockwise.
4 Remove the light bulb.
5 Install a new light bulb then
install the bulb base to the
light unit by inserting it and turning the bulb base clock-
wise.
6 Align the grooves on the light
unit with the claws, and insert
the light unit straight so that
the pin on the light unit fit into
the hole.
Confirm that the light unit is com-
pletely secured.
7Reinstall the screws.

6247-3. Do-it-yourself maintenance
8Reinstall the cover.
■Back-up lights
1 Open the back door and
remove the cover.
To prevent damag e to the cover,
protect the tip of the screwdriver
with a rag.
2 Turn the bulb base counter-
clockwise.
Remove the cord from the clip before turning the bulb base.
3
Remove the light bulb.
4 Install a new light bulb.
5 Install the bulb base to the
light unit by inserting it and
turning the bulb base clock-
wise.
Secure the cord wit h the clip back

6257-3. Do-it-yourself maintenance
7
Maintenance and care
again after installing the bulb base.
6Reinstall the cover.
WARNING
■Replacing light bulb
●Turn off the light. Do not attempt
to replace the bulb immediately
after turning off the light.
The bulb become very hot and
may cause burns.
●Do not touch the glass portion
of the light bulb with bare
hands. When it is unavoidable
to hold the glass portion, use
and hold with a clean dry cloth
to avoid getting moisture and
oils on the bulb.
Also, if the bulb is scratched or
dropped, it may blow out or
crack.
●Fully install light bulb and any
parts used to secure it. Failure
to do so may result in heat dam-
age, fire, or water entering the
light unit. This may damage the
light or cause condensation to
build up on the lens.
●Do not attempt to repair or dis-
assemble light bulbs, connec-
tors, electric circuits or
component parts.
Doing so may res ult in death or
serious injury due to electric
shock.
■To prevent damage or fire
●Make sure bulb is fully seated
and locked.
●Check the wattage of the bulb
before installing to prevent heat
damage.

6879-1. Specifications
9
Vehicle specifications
A: Wedge base bulbs (clear)
B: H16 halogen bulbs
C: Wedge base bulbs (amber)
D: Double end bulbs (clear)
*: If equipped
Light bulbs
Light bulbsBulb No.WType
Exterior
Front side marker lightsW5W5A
Fog lights*19B
Front turn signal/parking lights
(bulb type)7444NA28/8C
Rear turn signal lightsWY21W21C
Back-up lightsW16W16A
Outer foot lights*5A
Interior
Vanity lights8A
Front interior lights/personal lights5A
Rear interior light8D
Luggage compartment light5A

730Alphabetical Index
Audio button (Setup screen) ... ........... 384, 448
AUDIO button.......................... 379
Audio buttons overview......... 379
Audio settings ........................ 448
Automatic air conditioning sys- tem ......................................... 522Air conditioning filter ............. 608
Eco air conditioning mode .... 523
Automatic High Beam ............ 214
Automatic light control system ............................................... 212
Automatic transmission ........ 201 S mode ................................. 203
Auxiliary boxes ....................... 537
Average fuel consumption ...... 99
Average fuel economy ............. 91
Average vehicle speed ...... 93, 99
B
Back door ................................ 115 Hands Free Power Back Door........................................... 120
Power back door .................. 119
Wireless remote control ....... 119
Back-up lights Replacing light bulbs ............ 619
Wattage ................................ 682
Battery Checking .............................. 587
If the vehicle battery is dis-charged .............................. 666
Preparing and c hecking before
winter.................................. 371
Replacing ............................. 668
Warning light ........................ 638
Blind Spot Monitor (BSM) ...... 264 Blind Spot Monitor function .. 268
Rear Cross Traffic Alert function........................................... 270
Bluetooth
® button (Setup screen) ...................................384
Bluetooth
® details settings ...398
Bluetooth
® setup screen.......399
Connecting a Bluetooth
® device
...........................................399
Deleting a Bluetooth
® device401
Detailed settings screen .......403
Displaying the Bluetooth
® setup
screen.................................398
Editing the Bluetooth
® device
information..........................402
Registering a Bluetooth
® device
...........................................401
Bluetooth
® device information
...............................................402
Bluetooth
® hands-free system
...............................................471
Bluetooth
® phone message func-
tion .........................................482 Calling the message sender .485
Checking received messages ...........................................483
Displaying the message screen ...........................................482
Receiving a mess age ...........483
Replying to a message (dictation reply) ..................................484
Replying to a message (quick reply) ..................................485
Bottle holders .........................537
Brake Brake Hold ............................208
Fluid......................................585
Parking brake .......................205
Warning light ........................638
Brake assist ............................364
Brake Hold...............................208
Break-in tips ............................172
Brightness control Instrument panel light