Page 14 of 64
12
Hybrid Synergy Drive System
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the
vehicle. To conserve energy, when the brakes are applied the braking force
generates electricity which is then sent to the traction battery. In addition, the
engine shuts off when the vehicle is stopped. The benefits are better fuel economy
and reduced vehicle emissions.
NOTE: Fuel consumption and energy information of the Hybrid System are
shown on the Multi-Information Display (MID) and the audio system
screen (navigation system or multi-media system.)
1. Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
2. Link trips to reduce engine cold starts whenever possible.
3. Avoid driving at speeds that are higher than necessary, especially on the highway.
4. When possible, avoid sudden stops to maximize regenerative braking energy.
5. Minimize use of the Air Conditioning.
The “READY” light will blink. After a few seconds, when the light remains steady
and a beep sounds, shift the gear to the desired position and you may begin
driving.
Put the shift lever in “Park.”
Depress the brake pedal, and “
”
will be displayed on the Multi-
Information Display.
1 S F T T U I F i 1 0 8 & 3 w C V U U P O C S J F G M Z
and firmly.
Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
- % P P S T M P D L X I F O U I F W F I J D M F T Q F F E H P F T B C P W F B Q Q S P Y J N B U F M Z N Q I L N I
' U L Y H U
Page 58 of 64
56
SAFETY & EMERGENCY FEATURES
Star Safety System™
" / 5 * - 0 $ , # 3 " , & 4 : 4 5 & . " # 4
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
# 3 " , & " 4 4 * 4 5 # "
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
& - & $ 5 3 0 / * $ # 3 " , & ' 0 3 $ & % * 4 5 3 * # 6 5 * 0 / & # %
5 P Z P U B T " # 4 U F D I O P M P H Z I B T & M F D U S P O J D # S B L F G P S D F % J T U S J C V U J P O & # %
U P I F M Q
maintain control and balance when braking. EBD responds to sudden stops by
redistributing brake force to enhance the braking effectiveness of all four wheels. Your vehicle comes standard with the Star Safety System
TM, which combines Anti-
M P D L # S B L J O H 4 Z T U F N " # 4
# S B L F " T T J T U # "
& M F D U S P O J D # S B L F G P S D F % J T U S J C V U J P O
& # %
4 N B S U 4 U P Q 5 F D I O P M P H Z 4 4 5
7 F I J D M F 4 U B C J M J U Z $ P O U S P M 7 4 $
B O E 5 S B D U J P O
$ P O U S P M 5 3 " $
5 H I H U W R W K H 2 Z Q H U
Page 59 of 64
57
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
• Install floor mats right side up.
5 3 " $ 5 * 0 / $ 0 / 5 3 0 - 5 3 " $
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
T V S G B D F T C Z B Q Q M Z J O H C S B L F G P S D F U P U I F T Q J O O J O H X I F F M T
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
Always align the C marks